Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Minority Business Enterprise The Recipient shall comply with the minority business requirements pursuant to Section 164.07(A) of the Revised Code and rule 164-1-32 of the Administrative Code when making direct purchases of equipment, materials or supplies.
Unbundled Copper Sub-Loop (UCSL) is a copper facility of any length provided from the cross-box in the field up to and including the end-user’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the end-user and the cross-box.
Member The Member owns 100% of the limited liability company interests in the Company.
COVID-19 Employees of Contractor and/or persons working on its behalf, including, but not limited to, subcontractors (collectively, “Contractor Personnel”), while performing services under this Agreement and prior to interacting in person with City employees, contractors, volunteers, or members of the public (collectively, “In-Person Services”) must be fully vaccinated against the novel coronavirus 2019 (“COVID-19”). “Fully vaccinated” means that 14 or more days have passed since Contractor Personnel have received the final dose of a two-dose COVID-19 vaccine series (Moderna or Pfizer-BioNTech) or a single dose of a one-dose COVID-19 vaccine (Xxxxxxx & Xxxxxxx/Xxxxxxx) and all booster doses recommended by the Centers for Disease Control and Prevention. Prior to assigning Contractor Personnel to perform In-Person Services, Contractor shall obtain proof that such Contractor Personnel have been fully vaccinated. Contractor shall retain such proof for the document retention period set forth in this Agreement. Contractor shall grant medical or religious exemptions (“Exemptions”) to Contractor Personnel as required by law. If Contractor wishes to assign Contractor Personnel with Exemptions to perform In- Person Services, Contractor shall require such Contractor Personnel to undergo weekly COVID-19 testing, with the full cost of testing to be borne by Contractor. If Contractor Personnel test positive, they shall not be assigned to perform In-Person Services or, to the extent they have already been performing In-Person Services, shall be immediately removed from those assignments. Furthermore, Contractor shall immediately notify City if Contractor Personnel performing In-Person Services (1) have tested positive for or have been diagnosed with COVID-19, (2) have been informed by a medical professional that they are likely to have COVID-19, or (3) meet the criteria for isolation under applicable government orders.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
WSIB & LTD An Employee who is receiving benefits under the Workplace Safety and Insurance Act, or under an LTD plan, is not entitled to benefits under a school board’s sick leave and short-term disability plan for the same condition unless the employee is on a graduated return to work program then WSIB/LTD remains the first payor. For clarity, where an employee is receiving partial benefits under WSIB/LTD, they may be entitled to receive benefits under the sick leave plan, subject to the circumstances of the specific situation. During the interim period from the date of the injury/incident or illness to the date of the approval by the WSIB/LTD of the claim, the employee may access sick leave and short-term leave and disability coverage. A reconciliation of sick leave deductions made and payments provided, will be undertaken by the school board once the WSIB/LTD has adjudicated and approved the claim. In the event that the WSIB/LTD does not approve the claim, the school board shall deal with the absence consistent with the terms of the sick leave and short-term leave and disability plans.
Affiliated Group The term “Affiliated Group” shall mean any affiliated group within the meaning of Section 1504(a) of the Code or any similar group defined under a similar provision of state, local or foreign law.
GROUP COMPANIES Guangzhou Yiyan Cosmetics Co., Ltd. (广州逸妍化妆品有限公司) (Seal) By: /s/ Xxxxxxx Xxx Name: XXX Xxxxxxx (吕建华) Title: Legal Representative Shanghai Yizi Cosmetics Co., Ltd. (上海逸姿化妆品有限公司) (Seal) By: /s/ Xxxxxxx Xxx Name: XXX Xxxxxxx (吕建华) Title: Legal Representative Shanghai Yiqing Commercial and Trading Co., Ltd. (上海逸清商贸有限公司) (Seal) By: /s/ Xxxxxxx Xxx Name: XXX Xxxxxxx (吕建华) Title: Legal Representative Yatsen (Guangzhou) Culture Creative Co., Ltd. (逸仙(广州)文化创意有限公司) (Seal) By: /s/ Xxxxx Xxxx Name: XXXX Xxxxx (陈宇文) Title: Legal Representative
Company Subsidiaries As of the date of this Agreement, the Company has Previously Disclosed a true, complete and correct list of each entity in which the Company, directly or indirectly, owns sufficient capital stock or holds a sufficient equity or similar interest such that it is consolidated with the Company in the financial statements of the Company or has the power to elect a majority of the board of directors or other persons performing similar functions (each, a “Company Subsidiary” and, collectively, the “Company Subsidiaries”). Except for the Company Subsidiaries and as Previously Disclosed, the Company does not own beneficially or control, directly or indirectly, more than 5% of any class of equity securities or similar interests of any corporation, bank, business trust, association or similar organization, and is not, directly or indirectly, a partner in any general partnership or party to any joint venture or similar arrangement. The Company owns, directly or indirectly, all of its interests in each Company Subsidiary free and clear of any and all Liens. No equity security of any Company Subsidiary is or may be required to be issued by reason of any option, warrant, scrip, preemptive right, right to subscribe to, gross-up right, call or commitment of any character whatsoever relating to, or security or right convertible into, shares of any capital stock or other interest of such Company Subsidiary, and there are no contracts, commitments, understandings or arrangements by which any Company Subsidiary is bound to issue additional shares of its capital stock or other interest, or any option, warrant or right to purchase or acquire any additional shares of its capital stock. The deposit accounts of the Bank are insured by the Federal Deposit Insurance Corporation (“FDIC”) to the fullest extent permitted by the Federal Deposit Insurance Act, as amended, and the rules and regulations of the FDIC thereunder, and all premiums and assessments required to be paid in connection therewith have been paid when due (after giving effect to any applicable extensions). The Company beneficially owns all of the outstanding capital securities of, and has sole control of, the Bank.