We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.
For more information visit our privacy policy.Latent Defects Notwithstanding anything to the contrary set forth herein, no acceptance, or deemed acceptance, by City pursuant to this Section shall be applicable with respect to any Latent Defects. An acceptance, or deemed acceptance, by City pursuant to this Section shall not mean that City has accepted, or the other party has been relieved of, responsibility for: (i) compliance with the Laws; (ii) the proper application of construction means or methods; or (iii) correcting any portion of the Project if it later is determined that any portion of the Project is inconsistent with the Final Documents and Drawings.
Nonconforming Work 5.6.1 Rejection, Removal and Replacement of Nonconforming Work
Scratches appliance malfunctions and any resultant leak there from; (R) any stain, soiling or damage resulting from everyday use or which has built up over time, e.g. hair, body or suntan oils and/or lotions; (S) signs of soiling include darkened areas where the body comes into contact with the furniture (these darkened areas are signs of soil build-up, which is not covered); (T) general maintenance and overall cleaning of the furniture is the consumer’s responsibility; (U) damage due to harsh or corrosive chemicals; (V) acids, including without limitation, dyes and inks (except ballpoint), plant food and fertilizer and bleach, gum; (W) any non-operating part or decorative parts such as hinges, knobs, handles, or shelves; (X) coverage under another insurance program; (Y) delivery and/or redelivery and/or loss or damage to the Covered Product while in the course of transit; (Z) design deficiency; (AA) fabrics with “X” cleaning codes and non-colorfast fabrics and leathers; (AB) odors; (AC) variation of the color, or graining of wood or wood products, marble or leather; (AD) split leathers used in seat cushions, back cushions or top or inside arm areas; (AE) natural markings on leather, such as, healed scars, insect bites, brand marks or wrinkles, or suede, and leathers with embossed patterns other than those stimulating natural cowhide; (AF) non- bovine leathers, and other buffed leathers; (AG) stains, color loss or damage resulting from cleaning methods or products (detergents, abrasives or other harsh cleaning agents) other than those recommended by the furniture manufacturer; (AH) stone or sand abrasion; (AI) loss or damage resulting from: pre-existing conditions known to You; (AJ) wear related issues, such as but not limited to, fading, wear, seam separation, stress tears, loss of foam resiliency, pilling or fraying of any fabric on all types of furniture; (AK) color loss or cracking and peeling on any leather or vinyl; (AL) splits or bi-cast leather; (AM) furniture that is used for commercial, institutional, outdoor or rental purposes; (AN) Customer’s Own Material furniture; (AO) wicker, rattan, and teakwood furniture; (AP) massage chairs; (AQ) stains or damage to suede, split-grain leather hide or exotic leathers; (AR) manufacturer quality issues such as stress tears, fabric flaws, fading, color loss or change, loss of foam or resiliency, cracking and peeling of leather or vinyl, natural leather markings, and defects in design and workmanship; (AS) Stains or damage that occur during assembly, delivery, installation, before furniture is delivered to your residence, while the furniture is located outside of your residence, while the furniture is in storage or being moved to or from storage or between residences; (AT) Wear & Tear caused by repeated use such as scuffing, soiling, hair/body oil, perspiration, surface abrasions, pilling or fraying of fabric, loose joints; (AU) Stains or damage covered under any manufacturer warranty, recall, homeowner, renter or other insurance policy; (AV) Stains or damage caused by structural problems, appliance malfunctions, Acts of God or natural disasters, theft, vandalism or illegal activity (AW) Stains or damage caused by independent contractors
Warranty Work Failure by the Contractor to take corrective action within twenty four (24) hours after personal or telephonic notice by the County's OC Public Works on items affecting essential use of the facility, safety or the preservation of property, and within ten (10) calendar days following written notice on other deficiencies, will result in the County taking whatever corrective action it deems necessary. All costs resulting from such action by the County will be claimed against Contractor or, if necessary, the Contractor's Performance Bond.
Shortages Claims for shortages in the amount of Products shipped by Patheon will be dealt with by reasonable agreement of the parties.
Repair or Replacement (i) In the event of a Casualty or Taking between the Effective Date and the Closing Date, Seller shall elect, at its option, to either (A) repair or replace or make adequate provision for the repair or replacement of the Damaged Portion of the Purchased Assets at Seller’s cost prior to the Closing, in which case Buyer’s obligation to effect the Closing shall not be affected, but the Closing Date (and the End Date, if necessary) shall be deferred until three (3) Business Days after repairs 38 or replacement have been completed and the Damaged Portion of the Purchased Assets is fully repaired or restored to the condition thereof immediately prior to such Casualty or Taking in accordance with applicable Laws or Orders, or (B) negotiate with Buyer to reduce the Purchase Price to reflect the cost to repair or replace the Damaged Portion of the Purchased Assets and the post-Closing loss of net income associated with such business interruption (such repair or replacement costs and loss of net income, the “Repair Costs”). Notwithstanding the foregoing, Seller’s election in clause (A) of this Section 8.5(b)(i) shall be unavailable and clause (B) of this Section 8.5(b)(i) shall apply if the Damaged Portion of the Purchased Assets cannot reasonably be expected to be fully repaired or restored to the condition thereof immediately prior to such Casualty or Taking in accordance with applicable Laws or Orders on or before the date that is 180 days following the occurrence of the Casualty or Taking (the “Casualty Event Termination Date”) (ii) If Seller and Buyer agree on the Repair Costs within fifteen (15) days of Buyer’s receipt of Seller’s notice of the Casualty or Taking (the “Repair Negotiation Period”), Buyer’s obligation to effect the Closing shall not be affected, but the Purchase Price shall be reduced by the Repair Costs so agreed. (iii) If Seller and Buyer do not agree on the Repair Costs within the Repair Negotiation Period (a “Repair Cost Dispute”), Buyer or Seller may request an engineering company (and/or other appropriate specialist) that shall be mutually agreed to by Buyer and Seller to evaluate the Damaged Portion of the Purchased Assets and the loss of net income associated with such business interruption and deliver to Buyer and Seller its written estimate of the Repair Costs (the “Third-Party Estimate”) within fifteen (15) days after the end of the Repair Negotiation Period. If the Third-Party Estimate is less than the Buyer Casualty Threshold (or greater than the Buyer Casualty Threshold or Seller Casualty Threshold, as applicable, and neither party terminates the Agreement as permitted pursuant to Section 8.5(b)(iv)), Buyer’s obligation to effect the Closing shall not be affected and Buyer and Seller shall mutually resolve the Repair Cost Dispute after the Closing in accordance with the provisions of Section 2.3 (and, for the avoidance of doubt, the engineering company or other appropriate specialist shall be deemed to be the Inspector for purposes of Section 2.3), with a post-Closing adjustment to the Purchase Price equal to the finally-determined Repair Costs. (iv) Notwithstanding the foregoing, and subject to Section 8.5(f), if the Repair Costs as agreed to by Buyer and Seller or the Third-Party Estimate, as applicable, (A) is equal to or greater than the Buyer Casualty Threshold, Buyer may elect, by giving Seller written notice of election within fifteen (15) days of receipt of the Third-Party Estimate, or (B) is equal to or greater than the Seller Casualty Threshold, Seller may elect, by giving Buyer written notice of election within fifteen (15) days of receipt of the Third Party Estimate, to terminate this Agreement without further obligation hereunder, except as provided in Section 11.2.
Shipment Dell will ship the APEX System to the Site when included as part of the APEX Service. The terms and process for shipment and delivery of the APEX System will be stated in the applicable Service Offering Description.
Defective Work Work that, for any reason, is not in compliance with the Contract Documents. Defective Work is usually identified in a Notice of Non-Compliant Work.
Damage If prior to Closing the Property is damaged by fire or other casualty, Seller shall estimate the cost to repair and the time required to complete repairs and will provide Purchaser written notice of Seller’s estimation (the “Casualty Notice”) as soon as reasonably possible after the occurrence of the casualty.
Defective Product If Client rejects Products under Section 6.1 and the deviation is determined to have arisen from Patheon’s failure to provide the Manufacturing Services in accordance with the Specifications, cGMPs, or Applicable Laws, Patheon will credit Client’s account for Patheon’s invoice price for the defective Products. If Client previously paid for the defective Products, Patheon will promptly, at Client’s election, either: (i) refund the invoice price for the defective Products; (ii) offset the amount paid against other amounts due to Patheon hereunder; or (iii) replace the Products with conforming Products without Client being liable for payment therefor under Section 3.1, contingent upon the receipt from Client of all Active Materials and Client-Supplied Components required for the manufacture of the replacement Products. For greater certainty, Patheon’s responsibility for any loss of Active Materials in defective Product will be captured and calculated in the Active Materials Yield under Section 2.2.