FINISHING UNFORMED SURFACE Sample Clauses

FINISHING UNFORMED SURFACE. Unformed surface shall be finished by one or more of the operations of screening, floating and trowelling. Working of the surfaces should be done at proper time employing experienced men and should be just sufficient to produce the desired finish. Screeding which gives the surface its approximate shape by striking off surplus concrete immediately after compaction shall be accomplished by moving a straight edge or template with a sawing motion across wood on metal strip that have been established as guides. Where the surface is curved, a special screed should be used. Softly after the concrete is screed the surface should be brought true to form and grade by working in sparingly with wooden float. If a coarse textured finished is desired or if the surface is to be steel troweled, a second or final floating should be performed after some stiffening has occurred and the surface moisture film or shine has disappeared. Where a smooth dense finish is desired, floating shall has disappeared from the floated surface and when the concrete has hardened sufficiently to prevent fine materials and water from being worked out to the surface. Excessive trowelling particularly at an early time shall be avoided.
Sample 1Sample 2Sample 3See All (27)
AutoNDA by SimpleDocs

Related to FINISHING UNFORMED SURFACE

  • Road Surfaces (1) Grade, shape, crown, and/or outslope surface and shoulders.

  • Groundwater The groundwater shall not be degraded as a result of the waste maintained at the facility.

  • Surface  Grade and shape the road surface, turnouts, and shoulders to the original shape on the TYPICAL SECTION SHEET. Inslope or outslope as directed to provide a smooth, rut-free traveled surface and maintain surface water runoff in an even, unconcentrated manner.  Blading shall not undercut the backslope or cut into geotextile fabric on the road.  If required by the Contract Administrator, water shall be applied as necessary to control dust and retain fine surface rock.  Surface material shall not be bladed off the roadway. Replace surface material when lost or worn away, or as directed by the Contract Administrator.  Remove shoulder berms, created by grading, to facilitate drainage, except as marked or directed by the Contract Administrator.  For roads with geotextile fabric: spread surface aggregate to fill in soft spots and wheel ruts (barrel spread) to prevent damage to the geotextile fabric.

  • Excavation If any excavation shall be made upon land adjacent to or under the Building, or shall be authorized to be made, Tenant shall afford to the person causing or authorized to cause such excavation, license to enter the Premises for the purpose of performing such work as said person shall deem necessary or desirable to preserve and protect the Building from injury or damage and to support the same by proper foundations, without any claim for damages or liability against Landlord and without reducing or otherwise affecting Tenant’s obligations under this Lease.

  • Interior (a) Ceilings, sidewalls and bulkhead panels shall be clean and free of cracks and stains;

  • ROAD DIMENSIONS Purchaser shall perform road work in accordance with the dimensions shown on the TYPICAL SECTION SHEET and the specifications within this road plan.

  • Cutting, Patching, and Fitting The Contractor shall do all cutting, patching, and fitting of the Work that may be required to make its several parts come together properly and fit.

  • Animals The Hirer shall ensure that no animals (including birds) except guide dogs are brought into the premises, other than for a special event agreed to by the Village Hall. No animals whatsoever are to enter the kitchen at any time.

  • PREMISES DEEMED UNINHABITABLE If the Premises is deemed uninhabitable due to damage beyond reasonable repair the Tenant will be able to terminate this Agreement by written notice to the Landlord. If said damage was due to the negligence of the Tenant, the Tenant shall be liable to the Landlord for all repairs and for the loss of income due to restoring the Premises back to a livable condition in addition to any other losses that can be proved by the Landlord.

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

Time is Money Join Law Insider Premium to draft better contracts faster.