FIP L/C Sample Clauses

FIP L/C. On the terms and conditions set forth herein (i) the Issuing Bank agrees (A) from time to time on any Business Day during the period from the date of sale and delivery by Danka PLC or its Affiliate of a FIP to the Termination Date (or such earlier date as the Term Loan Commitments of all Banks shall have terminated in accordance with the terms hereof) to Issue FIP L/Cs in British pounds sterling for the account of Danka PLC or Danka PLC and such Affiliate, and (B) to honor drafts drawn under and in strict compliance with the terms and conditions of FIP L/Cs; and (ii) the Banks severally agree to participate in FIP L/Cs Issued for the account of Danka PLC or Danka PLC and such Affiliate; provided, that the Issuing Bank shall not be obligated to Issue, and no Bank shall be obligated to participate in, any FIP L/C if, as of the date of Issuance of such FIP L/C (the "Issuance Date") (1) there shall not be substantially simultaneously issued FIPs, the FIP Holder Payments in respect of which are to be supported by such FIP L/C, or (2) after giving effect to such Issuance, the Dollar Equivalent Amount of the Term Loan Outstandings exceeds or would exceed the aggregate Term Loan Commitments. Within the foregoing limits, and subject to the other terms and conditions hereof, Danka PLC's ability to obtain FIP L/Cs shall be fully revolving, and, accordingly, Danka PLC may, during the foregoing period, obtain FIP L/Cs to secure FIPs, so long as the proceeds of FIPs are used, together with such other funds as may be necessary, simultaneously to repay outstanding Term Loans by an amount equivalent to the face amount of the FIP L/C being issued on the Issuance Date. Payments of principal amount of Term Loans with proceeds of FIPs shall not reduce the Term Loan Commitments.
Sample 1
AutoNDA by SimpleDocs

Related to FIP L/C

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

  • STRS PICK-UP The Board agrees, as a condition of employment, to tax shelter employee contributions to the State Teacher's Retirement System (STRS) in accordance with State Retirement System and Federal Internal Revenue Service guidelines and restrictions. This section in no way implies that the Board will contribute any portion of the employee's share of retirement contributions. For purposes of this paragraph, total annual salary and salary per pay period of each bargaining unit member shall be the salary otherwise payable under this Agreement, as amended. The total annual salary and salary per pay period of each member shall be payable by the Board in two parts: (1) deferred salary and (2) cash salary. A member's deferred salary shall be equal to that percentage of said member's total annual salary or salary per pay period which is required from time to time by the State Teachers Retirement System (STRS) to be paid as an employee contribution by said member as a pickup of the STRS employee contribution otherwise payable by said member. A member's cash salary shall be equal to said member's total annual salary or salary per period less the amount of the pickup for said member and shall be payable, subject to applicable payroll deductions, to said member. The Board's total combined expenditures for members' total annual salaries otherwise payable under this Agreement, as amended, (including pickup amounts) and its employer contributions to STRS shall not be greater than the amounts it would have paid for those items had this provision not been in effect. The Board shall compute and remit its employer contributions to STRS based upon total annual salary, including the "pickup". The Board shall report for Federal and Ohio income tax purposes as a member's gross income said member's total annual salary less the amount of the "pickup". The Board shall report for municipal income tax purposes as a member's gross income said member's total annual salary, including the amount of the pickup. The pickup shall be included in the member's total annual salary for the purpose of computing daily rate of pay, for determining paid salary adjustments to be made due to absence, or for any other similar purpose. The pickup shall apply to all payroll payments made after the effective date of this provision. Should the Board's payment of deferred salary cause an individual bargaining unit member's annuity contributions to exceed the IRS permissible level, any such individual shall have the right to adjust annuity deductions within thirty (30) days of the effective date of this provision.

  • Ownership & License You agree that the Bank retains all ownership and proprietary rights in the Services, associated content, technology, and website(s). Your use of the Services is subject to and conditioned upon your complete compliance with this Agreement. Without limiting the effect of the foregoing, any breach of this Agreement immediately terminates your right to use the Services. Without limiting the restriction of the foregoing, you may not use the Services (i) in any anti-competitive manner, (ii) for any purpose which would be contrary to the Bank's business interest, or (iii) to the Bank's actual or potential economic disadvantage in any aspect. You may use the Services only for non-business, personal use in accordance with this Agreement. You may not copy, reproduce, distribute or create derivative works from the content and agree not to reverse engineer or reverse compile any of the technology used to provide the Services.

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Company Lock-Up (i) The Company will not, without the prior written consent of the Representative, for a period of 180 days from the date of this Agreement (the “Lock-Up Period”), (i) issue, offer, pledge, announce the intention to sell, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase or otherwise transfer or dispose of, directly or indirectly, or file with the Commission a registration statement under the Securities Act relating to, any shares of Common Stock or any securities convertible into or exercisable or exchangeable for shares of Common Stock, or (ii) enter into any swap or other agreement that transfers, in whole or in part, any of the economic consequences of ownership of the shares of Common Stock or any such other securities, whether any such transaction described in clause (i) or (ii) above is to be settled by delivery of shares of Common Stock or such other securities, in cash or otherwise, except to the Underwriters pursuant to this Agreement. The Company agrees not to accelerate the vesting of any option or warrant or the lapse of any repurchase right prior to the expiration of the Lock-Up Period. (ii) The restrictions contained in Section 3(n)(i) hereof shall not apply to: (A) the Offered Securities, (B) the Underlying Shares, (C) any shares of Common Stock issued pursuant to the conversion or exchange of convertible or exchangeable securities or the exercise of warrants or options, in each case outstanding as of the Applicable Time and as described in the Registration Statement, the Disclosure Package or the Prospectus, (D) any shares of Common Stock or options to purchase any shares of Common Stock or other any shares of Common Stock based award issued or granted pursuant to the Company’s stock incentive plans, stock purchase plan, stock ownership plan or dividend reinvestment plan in effect at the Applicable Time and as described in the Registration Statement, the Disclosure Package or the Prospectus, and (E) shares of Common Stock or other securities issued in connection with a transaction with an unaffiliated third party that includes a bona fide commercial relationship (including joint ventures, marketing or distribution arrangements, collaboration agreements or intellectual property license agreements) or any acquisition of assets or acquisition of not less than a majority or controlling portion of the equity of another entity; provided that (x) the aggregate number of shares of Common Stock issued pursuant to clause (E) shall not exceed five percent (5%) of the total number of outstanding shares of Common Stock immediately following the issuance and sale of the Offered Securities pursuant hereto and (y) the recipient of any such shares of Common Stock or other securities issued or granted pursuant to clause (E) during the Lock-Up Period shall enter into an agreement substantially in the form of Exhibit B hereto.

  • Compensation for Buy-In on Failure to Timely Deliver Certificates Upon Conversion In addition to any other rights available to the Holder, if the Company fails for any reason to deliver to the Holder such certificate or certificates by the Share Delivery Date pursuant to Section 4(c)(ii), and if after such Share Delivery Date the Holder is required by its brokerage firm to purchase (in an open market transaction or otherwise), or the Holder’s brokerage firm otherwise purchases, shares of Common Stock to deliver in satisfaction of a sale by the Holder of the Conversion Shares which the Holder was entitled to receive upon the conversion relating to such Share Delivery Date (a “Buy-In”), then the Company shall (A) pay in cash to the Holder (in addition to any other remedies available to or elected by the Holder) the amount, if any, by which (x) the Holder’s total purchase price (including any brokerage commissions) for the Common Stock so purchased exceeds (y) the product of (1) the aggregate number of shares of Common Stock that the Holder was entitled to receive from the conversion at issue multiplied by (2) the actual sale price at which the sell order giving rise to such purchase obligation was executed (including any brokerage commissions) and (B) at the option of the Holder, either reissue (if surrendered) this Debenture in a principal amount equal to the principal amount of the attempted conversion (in which case such conversion shall be deemed rescinded) or deliver to the Holder the number of shares of Common Stock that would have been issued if the Company had timely complied with its delivery requirements under Section 4(c)(ii). For example, if the Holder purchases Common Stock having a total purchase price of $11,000 to cover a Buy-In with respect to an attempted conversion of this Debenture with respect to which the actual sale price of the Conversion Shares (including any brokerage commissions) giving rise to such purchase obligation was a total of $10,000 under clause (A) of the immediately preceding sentence, the Company shall be required to pay the Holder $1,000. The Holder shall provide the Company written notice indicating the amounts payable to the Holder in respect of the Buy-In and, upon request of the Company, evidence of the amount of such loss. Nothing herein shall limit a Holder’s right to pursue any other remedies available to it hereunder, at law or in equity including, without limitation, a decree of specific performance and/or injunctive relief with respect to the Company’s failure to timely deliver certificates representing shares of Common Stock upon conversion of this Debenture as required pursuant to the terms hereof.

  • EPP query-­‐command RTT Refers to the RTT of the sequence of packets that includes the sending of a query command plus the reception of the EPP response for only one EPP query command. It does not include packets needed for the start or close of either the EPP or the TCP session. EPP query commands are those described in section 2.9.2 of EPP RFC 5730. If the RTT is 5-­‐times or more the corresponding SLR, the RTT will be considered undefined.

  • Compensation for Buy-In on Failure to Timely Deliver Conversion Shares Upon Conversion In addition to any other rights available to the Holder, if the Company fails for any reason to deliver to the Holder such Conversion Shares by the Share Delivery Date pursuant to Section 4(c)(ii), and if after such Share Delivery Date the Holder is required by its brokerage firm to purchase (in an open market transaction or otherwise), or the Holder’s brokerage firm otherwise purchases, shares of Common Stock to deliver in satisfaction of a sale by the Holder of the Conversion Shares which the Holder was entitled to receive upon the conversion relating to such Share Delivery Date (a “Buy-In”), then the Company shall (A) pay in cash to the Holder (in addition to any other remedies available to or elected by the Holder) the amount, if any, by which (x) the Holder’s total purchase price (including any brokerage commissions) for the Common Stock so purchased exceeds (y) the product of (1) the aggregate number of shares of Common Stock that the Holder was entitled to receive from the conversion at issue multiplied by (2) the actual sale price at which the sell order giving rise to such purchase obligation was executed (including any brokerage commissions) and (B) at the option of the Holder, either reissue (if surrendered) this Debenture in a principal amount equal to the principal amount of the attempted conversion (in which case such conversion shall be deemed rescinded) or deliver to the Holder the number of shares of Common Stock that would have been issued if the Company had timely complied with its delivery requirements under Section 4(c)(ii). For example, if the Holder purchases Common Stock having a total purchase price of $11,000 to cover a Buy-In with respect to an attempted conversion of this Debenture with respect to which the actual sale price of the Conversion Shares (including any brokerage commissions) giving rise to such purchase obligation was a total of $10,000 under clause (A) of the immediately preceding sentence, the Company shall be required to pay the Holder $1,000. The Holder shall provide the Company written notice indicating the amounts payable to the Holder in respect of the Buy-In and, upon request of the Company, evidence of the amount of such loss. Nothing herein shall limit a Holder’s right to pursue any other remedies available to it hereunder, at law or in equity including, without limitation, a decree of specific performance and/or injunctive relief with respect to the Company’s failure to timely deliver Conversion Shares upon conversion of this Debenture as required pursuant to the terms hereof.

  • Voice Grade Unbundled Copper Sub-Loop Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (aka riser cable)

  • Stockholder Lock-Ups The Company has caused to be delivered to you prior to the date of this Agreement a letter, in the form of Exhibit A hereto (the “Lock-Up Agreement”), from each individual or entity listed on Schedule IV. The Company will enforce the terms of each Lock-Up Agreement and issue stop-transfer instructions to the transfer agent for the Common Stock with respect to any transaction or contemplated transaction that would constitute a breach of or default under the applicable Lock-Up Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!