Flexibility 7.1 The Employer and an Employee covered by this Schedule may agree to make an individual flexibility arrangement to vary the effect of terms of this Schedule if:
7.1.1 the agreement deals with 1 or more of the following matters:
(i) arrangements about when work is performed - such arrangements may be made to vary the operation of clause 24 Hours of Work;
(ii) Salary Packaging – an employee may elect a salary packaging arrangement in accordance with clause 21 of this Schedule; and
7.1.2 the arrangement meets the genuine needs of the Employer and Employee in relation to 1 or more of the matters mentioned in 7.1.1; and
7.1.3 the arrangement is genuinely agreed to by the Employer and Employee.
7.2 The Employer must ensure that the terms of the individual flexibility arrangement:
(i) are about permitted matters under section 172 of the Fair Work Act 2009; and
(ii) are not unlawful terms under section 194 of the Fair Work Act 2009; and
(iii) result in the Employee being better off overall than the Employee would be if no arrangement was made.
7.3 The Employer must ensure that the individual flexibility arrangement:
7.3.1 is in writing; and
7.3.2 includes the name of the Employer and Employee; and
7.3.3 is signed by the Employer and Employee and if the Employee is under 18 years of age, signed by a parent or guardian of the Employee; and
7.3.4 includes details of:
(i) the terms of the Schedule that will be varied by the arrangement; and
(ii) how the arrangement will vary the effect of the terms; and
(iii) how the Employee will be better off overall in relation to the terms and conditions of his or her employment as a result of the arrangement; and
7.3.5 states the day on which the arrangement commences.
7.4 The Employer must give the Employee a copy of the individual flexibility arrangement within 14 days after it is agreed to.
7.5 The Employer or Employee may terminate the individual flexibility arrangement:
7.5.1 by giving no more than 28 days written notice to the other party to the arrangement; or
7.5.2 if the Employer and Employee agree in writing — at any time.
Ability to Abandon CVR A Holder may at any time, at such Holder’s option, abandon all of such Holder’s remaining rights in a CVR by transferring such CVR to Parent without consideration therefor. Nothing in this Agreement is intended to prohibit Parent from offering to acquire CVRs for consideration in its sole discretion.
Ability to Service The Servicer is an approved seller/servicer of conventional residential mortgage loans for Xxxxxx Xxx or Xxxxxxx Mac, with the facilities, procedures and experienced personnel necessary for the sound servicing of mortgage loans of the same type as the Mortgage Loans. The Servicer is in good standing to service mortgage loans for either Xxxxxx Mae or Xxxxxxx Mac. The Servicer is a member in good standing of the MERS system;
Your Ability to Withdraw Funds This policy applies to the availability of funds in transaction accounts. DATCU reserves the right to delay the availability of funds deposited to accounts that are not transaction accounts for periods longer than those disclosed in this policy. Our policy is to make funds from your deposits available to you on the business day we receive your deposit. At that time, you can withdraw the funds in cash and we will use the funds to pay checks that you have written. For determining the availability of your deposits, every day is a business day, except Saturdays, Sundays, federal holidays, and such other holidays we may observe, as may be published on our website or posted in our lobby from time to time. DATCU observes all federal holidays in addition to Good Friday and Christmas Eve. If you make a deposit before 6:00 p.m. on a business day that we are open, we will consider that to be the day of your deposit. However, if a deposit is made after 6:00 p.m. on a business day or on a day we are not open, the deposit will be considered made on the next business day we are open. Please remember that even after we have made the funds available to you, and you have withdrawn the funds, you are still responsible for checks you deposit that are returned to us unpaid and for any other problems involving your deposit. •CASHIER'S CHECKS •CASH •CERTIFIED CHECKS •STATE AND LOCAL GOVERNMENT CHECKS •TELLER’S CHECKS •CHECKS DRAWN ON DATCU •TRAVELER'S CHECKS •US TREASURY CHECKS •U.S. POSTAL MONEY ORDERS •WIRE TRANSFERS/ AUTOMATED CLEARING HOUSE (ACH) •FEDERAL RESERVE AND FEDERAL HOME LOAN CHECKS *To receive immediate credit for a check type listed above, the check must be payable to you and deposited into a transaction account of yours. Suspect Cashier’s Checks, Xxxxxx’s Checks, Certified Checks, Traveler’s Checks and U.S. Postal Money Orders may be subject to holds. Other types of Money Orders are considered “Payable Through” the issuer and do not fall under immediate or next-day availability. Please refer to the Longer Delays May Apply section below for the availability rules governing these deposits. In some cases, we will not make all of the funds that you deposit by check available to you on the same business day of your deposit. Depending on the type of check that you deposit, funds may not be available until the 2nd business day after the day of your deposit. However, the first $225 of your deposit will be available on the 1st business day after the day of your deposit. If we are not going to make all of the funds from your deposit available on the date of your deposit, we will notify you at the time you make your deposit. We will also tell you when the funds will be available. If your deposit is not made directly to one of our employees, or we decide to take this action after you have left the premises, we will mail you the notice by the day after we receive your deposit. If you will need the funds from a deposit right away, you should ask us when the funds will be available. In addition, funds you deposit by check may be delayed for a longer period under the following circumstances.
Agreement Flexibility 8.1 An employer and employee covered by this enterprise agreement may agree to make an individual flexibility arrangement to vary the effect of terms of the agreement if:
(a) the agreement deals with 1 or more of the following matters:
(i) arrangements about when work is performed;
(ii) overtime rates;
(iii) penalty rates;
(iv) allowances;
(v) leave loading; and
(b) the arrangement meets the genuine needs of the employer and employee in relation to 1 or more of the matters mentioned in paragraph (a); and
(c) the arrangement is genuinely agreed to by the employer and employee.
8.2 The employer must ensure that the terms of the individual flexibility arrangement:
(a) are about permitted matters under section 172 of the Fair Work Act 2009; and
(b) are not unlawful terms under section 194 of the Fair Work Act 2009; and
(c) result in the employee being better off overall than the employee would be if no arrangement was made.
8.3 The employer must ensure that the individual flexibility arrangement:
(a) is in writing; and
(b) includes the name of the employer and employee; and
(c) is signed by the employer and employee and if the employee is under 18 years of age, signed by a parent or guardian of the employee; and
(d) includes details of:
(i) the terms of the enterprise agreement that will be varied by the arrangement; and
(ii) how the arrangement will vary the effect of the terms; and
(iii) how the employee will be better off overall in relation to the terms and conditions of his or her employment as a result of the arrangement; and
(e) states the day on which the arrangement commences.
8.4 The employer must give the employee a copy of the individual flexibility arrangement within 14 days after it is agreed to.
8.5 The employer or employee may terminate the individual flexibility arrangement:
(a) by giving no more than 28 days written notice to the other party to the arrangement; or
(b) if the employer and employee agree in writing—at any time.
Reallocation of Participations to Reduce Fronting Exposure All or any part of such Defaulting Lender’s participation in L/C Obligations and Swingline Loans shall be reallocated among the Non-Defaulting Lenders in accordance with their respective Revolving Credit Commitment Percentages (calculated without regard to such Defaulting Lender’s Revolving Credit Commitment) but only to the extent that (x) the conditions set forth in Section 6.2 are satisfied at the time of such reallocation (and, unless the Borrower shall have otherwise notified the Administrative Agent at such time, the Borrower shall be deemed to have represented and warranted that such conditions are satisfied at such time), and (y) such reallocation does not cause the aggregate Revolving Credit Exposure of any Non-Defaulting Lender to exceed such Non-Defaulting Lender’s Revolving Credit Commitment. No reallocation hereunder shall constitute a waiver or release of any claim of any party hereunder against a Defaulting Lender arising from that Lender having become a Defaulting Lender, including any claim of a Non-Defaulting Lender as a result of such Non-Defaulting Lender’s increased exposure following such reallocation.
Reallocation of Applicable Percentages to Reduce Fronting Exposure During any period in which there is a Defaulting Lender, for purposes of computing the amount of the obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit or Swing Line Loans pursuant to Sections 2.03 and 2.04, the “Applicable Percentage” of each non-Defaulting Lender shall be computed without giving effect to the Commitment of that Defaulting Lender; provided, that, (i) each such reallocation shall be given effect only if, at the date the applicable Lender becomes a Defaulting Lender, no Default or Event of Default exists; and (ii) the aggregate obligation of each non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit and Swing Line Loans shall not exceed the positive difference, if any, of (1) the Commitment of that non-Defaulting Lender minus (2) the aggregate Outstanding Amount of the Committed Loans of that Lender.
Reallocation of Pro Rata Share to Reduce Fronting Exposure During any period in which any Revolving Credit Lender is a Defaulting Lender, for purposes of computing the amount of the obligation of each Revolving Credit Lender that is a Non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit or Swing Line Loans pursuant to Section 2.03, the “Pro Rata Share” of each Non-Defaulting Lender’s Revolving Credit Loans and L/C Obligations shall be computed without giving effect to the Revolving Credit Commitment of that Defaulting Lender; provided that (i) each such reallocation shall be given effect only if, at the date the applicable Revolving Credit Lender becomes a Defaulting Lender, no Default or Event of Default has occurred and is continuing; and (ii) the aggregate obligation of each Non-Defaulting Lender to acquire, refinance or fund participations in Letters of Credit and Swing Line Loans shall not exceed the positive difference, if any, of (1) the Revolving Credit Commitment of that Non-Defaulting Lender minus (2) the aggregate Outstanding Amount of the Revolving Credit Loans of that Non-Defaulting Lender. No reallocation hereunder shall constitute a waiver or release of any claim of any party hereunder against a Defaulting Lender arising from that Lender having become a Defaulting Lender, including any claim of a Non-Defaulting Lender as a result of such Non-Defaulting Lender’s increased exposure following such reallocation. If the allocation described in this clause (iv) cannot, or can only partially, be effected, the Borrower shall, without prejudice to any right or remedy available to it hereunder or under law, (x) first, prepay Swing Line Loans in an amount equal to the Swing Line Lenders’ Fronting Exposure and (y) second, Cash Collateralize the L/C Issuers’ Fronting Exposure in accordance with the procedures satisfactory to such L/C Issuer (in its sole discretion).
Right to Resell after withdrawal to sell the Property withdrawn at any time or times subject to such conditions and provisions whether identical with or differing wholly or in part from the conditions and provisions applicable to the Property to be auctioned at the present auction and in such manner as the Assignee/Bank may deem fit.
, amend to read 6.1.1.1. The section width shall be calculated by the following formula: S = S1 + K (A-A1), where: S is the "section width" rounded to the nearest millimetre and measured on the measuring rim; S1 is the "nominal section width" (in mm) as shown on the side wall of the tyre in the designation of the tyre as prescribed; A is the width (expressed in mm) of the measuring rim, as shown by the manufacturer in the descriptive note, 5 A1 is the width (expressed in mm) of the theoretical rim. A1 shall be taken to equal S1 multiplied by the factor x, as specified by the manufacturer, and K shall be taken to equal 0.4.
