Fuel Supply Agreements Sample Clauses

Fuel Supply Agreements. Generator shall use commercially reasonable efforts to maintain or enter into any necessary fuel supply agreements (only applicable to biomass facilities). •
AutoNDA by SimpleDocs
Fuel Supply Agreements. (a) After Substantial Completion of both Units (as each such term is defined in the EPC Contract), the Borrower shall not terminate and shall not cause the Westinghouse Fuel Assembly Agreement to be terminated prior to the time it is fully performed unless the Borrower at the time of such termination has a contract or contracts in place for an alternate supply of fuel assemblies for not less than the next two (2) reloads for each Unit, and has the right to use the BEACON Software or another core monitoring system that complies with the COLs with such alternate supply of fuel assemblies; provided, however, that this covenant shall not prevent the Borrower from amending or causing to be amended the Westinghouse Fuel Assembly Agreement, except as provided in Section 7.4(g), and shall not prevent the Borrower from enforcing or causing to be enforced any remedy available to Borrower under the Westinghouse Fuel Assembly Agreement other than termination. (b) The Borrower shall not fail at any time (i) to ensure that a contractual obligation for the supply of not less than two (2) additional reloads of fuel assemblies and related fuel fabrication services for each Unit is in place or (ii) to have the right to use the BEACON Software or another core monitoring system that complies with the COLs with such reloads. (c) Notwithstanding the foregoing, the Borrower shall not be deemed to have failed to perform or observe the covenants set forth in clauses (a) and (b) of this Section 7.11, unless the Borrower shall fail to have remedied any non-compliance with the terms of such covenants by the date that is one (1) year in advance of the next scheduled delivery date for the last fuel assembly for the next reload for the Unit in question available under the then-effective Fuel Supply Agreement, provided that (1) the Borrower is diligently working to remedy such non-compliance pursuant to a plan of remediation with a timetable for curing such non-compliance that has been provided to DOE at the time of such non-compliance, (2) the Borrower reasonably believes such non-compliance will be remedied through such diligent efforts, and (3) such non-compliance could not reasonably be expected to have a Material Adverse Effect or a material adverse effect on the ability of the Project to be operated.
Fuel Supply Agreements. The Westinghouse Fuel Assembly Agreement and any Additional Project Documents for the supply of fuel assemblies for the Project.
Fuel Supply Agreements. Bulk Supply Agreement: Establishes the availability and quality of the fuel supply.

Related to Fuel Supply Agreements

  • Supply Agreements For a period of three years from the consummation of the IPO, Odetics shall not unilaterally terminate or assign its guarantee obligation with respect to any supply agreement pursuant to which it has guaranteed the performance by ATL of ATL's obligations, unless such suppliers have consented to the termination or assignment of such guarantee.

  • Supply Agreement Seller and Buyer, or their Affiliates, shall have executed the Supply Agreement.

  • License Agreements (a) Each Borrower and Guarantor shall (i) promptly and faithfully observe and perform all of the material terms, covenants, conditions and provisions of the material License Agreements to which it is a party to be observed and performed by it, at the times set forth therein, if any, (ii) not do, permit, suffer or refrain from doing anything that could reasonably be expected to result in a default under or breach of any of the terms of any material License Agreement, (iii) not cancel, surrender, modify, amend, waive or release any material License Agreement in any material respect or any term, provision or right of the licensee thereunder in any material respect, or consent to or permit to occur any of the foregoing; except, that, subject to Section 9.19(b) below, such Borrower or Guarantor may cancel, surrender or release any material License Agreement in the ordinary course of the business of such Borrower or Guarantor; provided, that, such Borrower or Guarantor (as the case may be) shall give Agent not less than thirty (30) days prior written notice of its intention to so cancel, surrender and release any such material License Agreement, (iv) give Agent prompt written notice of any material License Agreement entered into by such Borrower or Guarantor after the date hereof, together with a true, correct and complete copy thereof and such other information with respect thereto as Agent may request, (v) give Agent prompt written notice of any material breach of any obligation, or any default, by any party under any material License Agreement, and deliver to Agent (promptly upon the receipt thereof by such Borrower or Guarantor in the case of a notice to such Borrower or Guarantor and concurrently with the sending thereof in the case of a notice from such Borrower or Guarantor) a copy of each notice of default and every other notice and other communication received or delivered by such Borrower or Guarantor in connection with any material License Agreement which relates to the right of such Borrower or Guarantor to continue to use the property subject to such License Agreement, and (vi) furnish to Agent, promptly upon the request of Agent, such information and evidence as Agent may reasonably require from time to time concerning the observance, performance and compliance by such Borrower or Guarantor or the other party or parties thereto with the material terms, covenants or provisions of any material License Agreement. (b) Each Borrower and Guarantor will either exercise any option to renew or extend the term of each material License Agreement to which it is a party in such manner as will cause the term of such material License Agreement to be effectively renewed or extended for the period provided by such option and give prompt written notice thereof to Agent or give Agent prior written notice that such Borrower or Guarantor does not intend to renew or extend the term of any such material License Agreement or that the term thereof shall otherwise be expiring, not less than sixty (60) days prior to the date of any such non-renewal or expiration. In the event of the failure of such Borrower or Guarantor to extend or renew any material License Agreement to which it is a party, Agent shall have, and is hereby granted, the irrevocable right and authority, at its option, to renew or extend the term of such material License Agreement, whether in its own name and behalf, or in the name and behalf of a designee or nominee of Agent or in the name and behalf of such Borrower or Guarantor, as Agent shall determine at any time that an Event of Default shall exist or have occurred and be continuing. Agent may, but shall not be required to, perform any or all of such obligations of such Borrower or Guarantor under any of the License Agreements, including, but not limited to, the payment of any or all sums due from such Borrower or Guarantor thereunder. Any sums so paid by Agent shall constitute part of the Obligations. (c) No Borrower or Guarantor shall assign, sell, mortgage, lease, transfer, pledge, hypothecate, grant a security interest in or lien upon, encumber, grant an exclusive or non-exclusive license relating to any Intellectual Property, or otherwise dispose of any Intellectual Property, in each case without the prior written consent of Agent, except that any Borrower or Guarantor may, after written notice to Agent, grant a non-exclusive license relating to any Intellectual Property to another Borrower or Guarantor in the ordinary course of business.

  • Sublicense Agreements Sublicenses under this Section 2.3 shall be granted only pursuant to written agreements, which shall be subject to and consistent with the terms and conditions of this Agreement. Such Sublicense agreements shall contain, among other things, provisions to the following effect: 2.3.2.1 all provisions necessary to ensure Licensee’s ability to comply with Licensee’s obligation under or not violate the provisions of Sections 4.4, 4.5, 4.6, 5.1, 5.3, 5.4, 8.1 and 11.1; 2.3.2.2 a section substantially the same as Article 9 (Indemnification), which also shall state that the Indemnitees (as defined in Section 9.1) are intended third party beneficiaries of such Sublicense agreement for the purpose of enforcing such indemnification; 2.3.2.3 in the event of termination of the license set forth in Section 2.1.1 above (in whole or in part (e.g., termination of the license as to a Licensed Product or in a particular country)), any existing Sublicense shall terminate to the extent of such terminated license; provided, however, that, for each Sublicensee, upon termination of the license, if the Sublicensee is not then in breach of the Sublicense agreement such that Licensee would have the right to terminate such Sublicense agreement, such Sublicensee shall have the right to obtain a license from Harvard on the same terms and conditions as set forth herein, which shall not impose any representations, warranties, obligations or liabilities on Harvard that are not included in this Agreement, provided that (a) the scope of the license granted directly by Harvard to such Sublicensee shall be coextensive with the scope of the license granted by Licensee to such Sublicensee, (b) if the Sublicense granted to such Sublicensee was non-exclusive, such Sublicensee shall not have the right to participate in the prosecution or enforcement of the Patent Rights under the license granted to it directly by Harvard and (c) if there are more than one Sublicensee, each Sublicensee that is granted a direct license shall be responsible for a pro rata share of the reimbursement due under Section 6.2.3 of this Agreement (based on the number of direct licenses under the Patent Rights in effect on the date of reimbursement); 2.3.2.4 the Sublicensee shall only be entitled to sublicense its rights under such Sublicense agreement on the terms set forth in this Section 2.3; and 2.3.2.5 the Sublicensee shall not be entitled to assign the Sublicense agreement without the prior written consent of Harvard, except that Sublicensee may assign the Sublicense agreement to a successor in connection with the merger, consolidation or sale of all or substantially all of its assets or that portion of its business to which the Sublicense agreement relates; provided, however, that any permitted assignee agrees in writing in a manner reasonably satisfactory to Harvard to be bound by the terms of such Sublicense agreement.

  • Interconnection Agreement Seller shall comply with the terms and conditions of the Interconnection Agreement.

  • TIPS Sales and Supplemental Agreements If awarded, when making a sale under this awarded contract, the terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, defects, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, AIA Contract, Invoice, etc.) (“Supplemental Agreement” as used herein) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement. The Supplemental Agreement shall dictate the scope of services, the project delivery expectations, the scheduling of projects and milestones, the support requirements, and all other terms applicable to the specific sale(s) between the Vendor and the TIPS Member.

  • Client Agreements Supplier will have a direct contract with, or provide its standard Product or Service terms directly to, Client, which will be enforceable solely between Client and Supplier, for all terms related to Client’s receipt and use of Products and Services (each a “Client Agreement”), other than the payment, risk of loss, and delivery terms that are contracted directly with Accenture.

  • Quality Agreement Concurrently with execution of this Agreement, the Parties will enter into an agreement that details the quality assurance obligations of each Party with respect to the Manufacture and supply of Supplied Products under this Agreement (the “Quality Agreement”). Each Party shall perform its obligations under the Quality Agreement in accordance with the terms and conditions thereof. In the event of a conflict between the terms of the Quality Agreement and the terms of this Agreement, the provisions of the Quality Agreement shall govern.

  • Project Contracts Prior to the delivery of this Lease, the Company may have entered into a contract or contracts with respect to the acquisition and/or construction of the Improvements. Those contracts, and any such contracts entered into by the Company after delivery of this Lease are hereinafter referred to as the “Project Contracts.” Prior to the delivery hereof, certain work has been or may have been performed on the Improvements pursuant to said Project Contracts or otherwise. Subject to the Lender’s rights in the Project Contracts, the Company hereby conveys, transfers and assigns to the Issuer all of the Company’s rights in, but not its obligations under the Project Contracts and the Issuer hereby designates the Company as Issuer’s agent for the purpose of executing and performing the Project Contracts. After the execution hereof, the Company shall cause the Project Contracts to be fully performed by the contractor(s), subcontractor(s) and supplier(s) thereunder in accordance with the terms thereof, and the Company covenants to cause the Improvements to be acquired, constructed and/or completed in accordance with the Project Contracts. Any and all amounts received by the Issuer, the Trustee or the Company from any of the contractors or other suppliers by way of breach of contract, refunds or adjustments shall become a part of and be deposited in the Project Fund.

  • Supply of Products ‌‌ 3.1 The Supplier warrants that the Products shall: (a) correspond with their description and any applicable Product Specification; (b) conform in all respects with the Order and any relevant sample; (c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement; (d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner;‌ (e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery; (f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products;‌ (g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and (h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice.‌ 3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract. 3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract. 3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance.‌ 3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!