General Exceptions for Trade in Goods Sample Clauses

General Exceptions for Trade in Goods. For the purposes of Chapters 2 to 7, subject to the requirement that such measures are not applied in a manner which would constitute a means of arbitrary or unjustifiable discrimination between the Parties where the same conditions prevail, or a disguised restriction on international trade in goods, nothing in this Agreement shall be construed to prevent the adoption or enforcement by a Party of measures: (a) necessary to protect public morals; (b) necessary to protect human, animal or plant life or health; (c) relating to the importations or exportations of gold or silver; (d) necessary to secure compliance with laws or regulations which are not inconsistent with the provisions of this Agreement, including those relating to customs enforcement, the enforcement of monopolies operated under paragraph 4 of Article II and Article XVII of GATT 1994, the protection of patents, trade marks and copyrights, and the prevention of deceptive practices;
AutoNDA by SimpleDocs
General Exceptions for Trade in Goods. For the purposes of Chapters 2 to 7, subject to the requirement that such measures are not applied in a manner which would constitute a means of arbitrary or unjustifiable discrimination between the Parties where the same conditions prevail, or a disguised restriction on international trade in goods, nothing in this Agreement shall be construed to prevent the adoption or enforcement by a Party of measures: (a) necessary to protect public morals; (b) necessary to protect human, animal or plant life or health; (c) relating to the importations or exportations of gold or silver; (d) necessary to secure compliance with laws or regulations which are not inconsistent with the provisions of this Agreement, including those relating to customs enforcement, the enforcement of monopolies operated under paragraph 4 of Article II and Article XVII of GATT 1994, the protection of patents, trade marks and copyrights, and the prevention of deceptive practices; (e) relating to the products of prison labour; (f) necessary to protect national treasures or specific sites of historical or archaeological value, or to support creative arts of national value; (g) relating to the conservation of exhaustible natural resources if such measures are made effective in conjunction with restrictions on domestic production or consumption; (h) undertaken in pursuance of obligations under any intergovernmental commodity agreement which conforms to criteria submitted to the WTO and not disapproved by it or which is itself so submitted and not so disapproved; (i) involving restrictions on exports of domestic materials necessary to ensure essential quantities of such materials to a domestic processing industry during periods when the domestic price of such materials is held below the world price as part of a governmental stabilisation plan; Provided that such restrictions shall not operate to increase the exports of or the protection afforded to such domestic industry, and shall not depart from the provisions of this Agreement relating to non-discrimination; (j) essential to the acquisition or distribution of products in general or local short supply; Provided that any such measures shall be consistent with the principle that all WTO members are entitled to an equitable share of the international supply of such products, and that any such measures which are inconsistent with the other provisions of this Agreement shall be discontinued as soon as the conditions giving rise to them have ceased to ...

Related to General Exceptions for Trade in Goods

  • Malicious Use of Orphan Glue Records Registry Operator shall take action to remove orphan glue records (as defined at xxxx://xxx.xxxxx.xxx/en/committees/security/sac048.pdf) when provided with evidence in written form that such records are present in connection with malicious conduct.

  • Conditions for Closing The Lender shall not be obligated to disburse the Bridge Loan until the Borrower shall have fulfilled and/or furnished to the Lender, at the Borrower’s own cost and expense, the following conditions (unless waived in writing by Lender): (a) The Loan Documents duly executed by the Borrower and each Guarantor (as applicable) along with evidence that all financing statements and other filings contemplated thereby have been made and the Security Documents to be placed of record or filed shall have been duly executed and recorded and filed in all appropriate offices and shall constitute a first and prior Lien on the Collateral, subject only to those matters set forth in Section 6.01 of this Agreement and all taxes, fees and charges in connection therewith shall have been paid. (b) Evidence, in form and substance satisfactory to the Lender, that the Aircraft, business and all assets of the Borrower are adequately insured as required by Section 5.04. (c) Payment of the Origination Fee and all reimbursable costs and expenses pursuant to the Loan Documents, together with evidence of payment to other parties of all fees and costs which Borrower is required under the Loan Documents to pay by the Closing Date. (d) Lien searches (including Uniform Commercial Code, judgments, bankruptcy and taxes) with respect to the Borrower and each Guarantor (at the state and county level) from the jurisdiction of its organization and each other jurisdiction in which it maintains an office, including the home airport of the Aircraft, (i) showing no existing Liens on the Collateral pledged by such Persons except as permitted hereunder or (ii) accompanied by necessary termination statements, release statements and any other types of release in connection with any impermissible Liens disclosed by such searches that have been filed or for which satisfactory arrangements have been made for such filing on the Closing Date. (e) With respect to the Aircraft, (i) an FAA and International Registry lien and title search acceptable to the Lender, (ii) a copy of Aircraft Registration Certificate, (iii) lien and title searches of the applicable Canadian government authorities, including without limitation under the Personal Property Security Act, in form acceptable to the Lender, (iv) evidence that the Borrower has become a Transaction User Entity (as defined in the International Registry) and appointed an administrator and a professional registry user entity, in form and substance satisfactory to the Lender, (v) reasonable evidence that the Aircraft is eligible for prompt issuance of a U.S. Certificate of Airworthiness following the Aircraft’s transfer of title to Borrower, (vi) Completed Customs and Border Protection Forms 7501 and 3461 evidencing importation into the U.S., and (vii) a copy of the airframe, engine, and avionics maintenance programs. (f) Copies of all of the Aircraft Contracts in effect as of the Closing Date, in form and substance reasonably acceptable to the Lender. (g) A copy of the Borrower’s and each Guarantor’s organizational documents, in form and substance satisfactory to the Lender. (h) A certificate of existence, authorization, good standing certificate, or its equivalent of each of the Borrower and the Guarantor from the Secretary of State of such Person’s jurisdiction of incorporation/formation/organization and the Secretary of State of each other jurisdiction in which such Person is qualified to do business as a foreign corporation/company/partnership, if any. (i) A certificate in form and substance satisfactory to Lender from the Borrower and each Guarantor, dated the Closing Date and signed on behalf of such Person by an authorized member/manager/officer of such Person certifying as to (i) true copies of the organizational documents of such Person and any amendments thereto, (ii) the resolutions of the directors/managers and/or shareholders/members (as the case may be) of such Person authorizing the execution and delivery of this Agreement and the other Loan Documents to which it is a party and (iii) the names, true signatures and incumbency of the members/managers/officers of such Person authorized to execute and deliver the Loan Documents to which it is a party. The Lender may conclusively rely on such certification unless and until a later certificate revising the prior certificate has been furnished to the Lender. (j) A certification regarding the beneficial ownership of the Borrower, as required by the Bank Secrecy Act (31 C.F.R. §1010.230 et. seq.), as amended from time to time, the regulations promulgated thereunder, and any successor statute, in form and substance satisfactory to the Lender. (k) Evidence, in form and substance acceptable to the Lender, that the Borrower has a tangible balance sheet equity of at least twenty percent (20%) on the Closing Date. (l) An opinion of counsel on behalf of the Borrower and the Guarantor, dated the Closing Date, in form and substance satisfactory to the Lender in absolute discretion. (m) An opinion of special FAA counsel, including an International Registry Priority Search Certificate, each dated the Closing Date, in form and substance satisfactory to the Lender in absolute discretion. (n) Listing of furniture, fixtures and equipment owned by the Borrower or a certification that the Borrower does not own any, satisfactory in form and content to the Lender, indicating that the estimated value of such furniture, fixtures and equipment. (o) An inventory of all Warranties (including copies all documentation with respect thereto) relating to the Aircraft. (p) The Borrower shall have executed and delivered all forms, documentation and information necessary for the establishment of the Cash Collateral Account at Lender, and shall have funded the Cash Collateral into the Cash Collateral Account (either prior to the Closing Date or contemporaneously therewith). (q) Such other instruments, documents, certificates, assurances and opinions as may be set forth in the preliminary closing checklist delivered to the Borrower in connection with this Agreement or as the Lender shall reasonably require to evidence and secure the Loan, to comply with the provisions hereof and the requirements of regulatory authorities to which the Lender is subject, all of which, including those referred to above in this Section 4.01 shall be satisfactory in form, content and substance to the Lender.

  • Court Ordered Requests for Call Detail Records and Other Subscriber Information 7.1 To the extent technically feasible, BellSouth maintains call detail records for Mpower end users for limited time periods and can respond to subpoenas and court ordered requests for this information. BellSouth shall maintain such information for Mpower end users for the same length of time it maintains such information for its own end users. 7.2 Mpower agrees that BellSouth will respond to subpoenas and court ordered requests delivered directly to BellSouth for the purpose of providing call detail records when the targeted telephone numbers belong to Mpower end users. Billing for such requests will be generated by BellSouth and directed to the law enforcement agency initiating the request. 7.3 Where BellSouth is providing to Mpower telecommunications services for resale or providing to Mpower the local switching function, then Mpower agrees that in those cases where Mpower receives subpoenas or court ordered requests regarding targeted telephone numbers belonging to Mpower end users, if Mpower does not have the requested information, Mpower will advise the law enforcement agency initiating the request to redirect the subpoena or court ordered request to BellSouth. Where the request has been forwarded to BellSouth, billing for call detail information will be generated by BellSouth and directed to the law enforcement agency initiating the request. 7.4 In all other instances, Mpower will provide Mpower end user and/or other customer information that is available to Mpower in response to subpoenas and court orders for their own customer records. When BellSouth receives subpoenas or court ordered requests regarding targeted telephone numbers belonging to Mpower end users, BellSouth will advise the law enforcement agency initiating the request to redirect the subpoena or court ordered request to Mpower.

  • Minimum Condition and Warranty Requirements for TIPS Sales All goods quoted or sold through a TIPS Sale shall be new unless clearly stated otherwise in writing. All new goods and services shall include the applicable manufacturers minimum standard warranty unless otherwise agreed to in the Supplemental Agreement.

  • Changes in Equipment, Systems, Etc USBFS reserves the right to make changes from time to time, as it deems advisable, relating to its systems, programs, rules, operating schedules and equipment, so long as such changes do not adversely affect the services provided to the Trust under this Agreement.

  • Buyer’s Conditions for Closing Unless otherwise waived in writing, and without prejudice to Buyer’s right to terminate this Contract during the Review Period, the duties and obligations of Buyer to proceed to Closing under the terms and provisions of this Contract are and shall be expressly subject to strict compliance with, and satisfaction or waiver of, each of the conditions and contingencies set forth in this Section 9.1, each of which shall be deemed material to this Contract. In the event of the failure of any of the conditions set forth in this Section 9.1 or of any other condition to Buyer’s obligations provided for in this Contract, which condition is not waived in writing by Buyer, Buyer shall have the right at its option to terminate this Contract, in which case the Xxxxxxx Money Deposit shall be immediately returned to Buyer and each of the parties shall be relieved from further liability to the other, except as otherwise expressly provided herein, with respect to this Contract. (a) All of Seller’s representations and warranties contained in or made pursuant to this Contract shall be true and correct in all material respects as if made again on the Closing Date. (b) Buyer shall have received all of the instruments and conveyances listed in Section 10.2. (c) Seller shall have performed, observed and complied in all material respects with all of the covenants, agreements, closing requirements and conditions required by this Contract to be performed, observed and complied with by Seller, as and when required hereunder. (d) Third Party Consents in form and substance reasonably satisfactory to Buyer shall have been obtained and furnished to Buyer. (e) The Existing Franchise Agreement shall have been terminated. (f) The Existing Management Agreement shall have been terminated and Buyer and the Manager shall have executed and delivered the New Management Agreement consistent with the form attached hereto as Exhibit E. (g) Buyer and Franchisor shall have executed (or Franchisor has unconditionally committed to execute) the New Franchise Agreement. (h) Seller shall have complied, in all material respects, with its obligations under the thirteen (13) other purchase contracts (“Other Contracts”), each of even date herewith and all of which are more particularly described on Exhibit K hereto; and Seller shall be unconditionally prepared to close on the sale of the hotel properties described in the Other Contracts (“Other Properties”) simultaneously with Closing on the Property.

  • Mail Order Catalog Warnings In the event that, the Settling Entity prints new catalogs and sells units of the Products via mail order through such catalogs to California consumers or through its customers, the Settling Entity shall provide a warning for each unit of such Product both on the label in accordance with subsection 2.4 above, and in the catalog in a manner that clearly associates the warning with the specific Product being purchased. Any warning provided in a mail order catalog shall be in the same type size or larger than other consumer information conveyed for such Product within the catalog and shall be located on the same display page of the item. The catalog warning may use the Short-Form Warning content described in subsection 2.3(b) if the language provided on the Product label also uses the Short-Form Warning.

  • Instructions for Operators This agreement is intended to be provided to an Operator from a LEA. The Operator should fully read the agreement and is requested to complete the below areas of the agreement. Once the Operator accepts the terms of the agreement, the Operator should wet sign the agreement and return it to the LEA. Once the LEA signs the agreement, the LEA should provide a signed copy of the agreement to the Operator. Cover Page Box # 3 Official Name of Operator Cover Page Box # 4 Date Signed by Operator Recitals Box #5 Contract Title for Service Agreement Recitals Box #6 Date of Service Agreement Article 7 Boxes #7-10 Operator’s designated representative Signature Page Boxes #15-19 Authorized Operator’s representative signature Exhibit A Box #25 Description of services provided Exhibit B All Applicable Boxes  Operator notates if data is collected to provide the described services.  Defines the schedule of data required for the Operator to provide the services outlined in Exhibit A Exhibit D All Applicable Boxes (Optional Exhibit): Defines deletion or return of data expectations by LEA Exhibit E All Applicable Boxes (Optional Exhibit): Operator may, by signing the Form of General Offer of Privacy Terms (General Offer, attached as Exhibit E), be bound by the terms of this DPA to any other Subscribing LEA who signs the acceptance in said Exhibit. Exhibit F Boxes # 25-29 A list of all Subprocessors used by the Operator to perform functions pursuant to the Service Agreement, list security programs and measures, list Operator’s security measures

  • Solicitations for Subcontracts, Including Procurement of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Local Government for work to be performed under a subcontract, including procurement of materials or leases of equipment, each potential subcontractor or supplier will be notified by the Local Government of the Local Government’s obligations under this Agreement and the Acts and Regulations relative to Nondiscrimination on the grounds of race, color, or national origin.

  • Insurance and Fingerprint Requirements Information Insurance If applicable and your staff will be on TIPS member premises for delivery, training or installation etc. and/or with an automobile, you must carry automobile insurance as required by law. You may be asked to provide proof of insurance. Fingerprint It is possible that a vendor may be subject to Chapter 22 of the Texas Education Code. The Texas Education Code, Chapter 22, Section 22.0834. Statutory language may be found at: xxxx://xxx.xxxxxxxx.xxxxx.xxxxx.xx.xx/ If the vendor has staff that meet both of these criterion: (1) will have continuing duties related to the contracted services; and (2) has or will have direct contact with students Then you have ”covered” employees for purposes of completing the attached form. TIPS recommends all vendors consult their legal counsel for guidance in compliance with this law. If you have questions on how to comply, see below. If you have questions on compliance with this code section, contact the Texas Department of Public Safety Non-Criminal Justice Unit, Access and Dissemination Bureau, FAST-FACT at XXXX@xxxxx.xxxxx.xx.xx and you should send an email identifying you as a contractor to a Texas Independent School District or ESC Region 8 and TIPS. Texas DPS phone number is (000) 000-0000. See form in the next attribute to complete entitled: Texas Education Code Chapter 22 Contractor Certification for Contractor Employees

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!