Input Alternatives Sample Clauses

Input Alternatives. Access problems concerning the input interface to a microcomputer differ according to the type and severity of an employee's functional limitation. Some users with disabilities are capable of using a keyboard, if it can SECTION C - DESCRIPTION/SPECIFICATION/WORK STATEMENT be modified slightly. Others require an alternative input strategy. The following is an overview of common input alternatives and other input functional requirements that should be considered:
AutoNDA by SimpleDocs

Related to Input Alternatives

  • Possible Alternative Structures Notwithstanding anything to the contrary contained in this Agreement, prior to the Effective Time Tower shall be entitled to revise the structure of the Merger, including without limitation, by merging First Xxxxxxx into a wholly-owned subsidiary of Tower or by merging FNB into Graystone Bank or another wholly-owned subsidiary of Tower, provided that (i) any such subsidiary shall become a party to, and shall agree to be bound by, the terms of this Agreement; (ii) there are no adverse Federal or state income tax or other adverse tax consequences to First Xxxxxxx shareholders as a result of the modification; (iii) the consideration to be paid to the holders of First Xxxxxxx Common Stock under this Agreement is not thereby changed in kind or value or reduced in amount; and (iv) such modification will not delay or jeopardize the receipt of Regulatory Approvals or other consents and approvals relating to the consummation of the Merger, otherwise delay or jeopardize the satisfaction of any condition to Closing set forth in Article VII or otherwise adversely affect First Xxxxxxx or the holders of the First Xxxxxxx Common Stock. The parties hereto agree to appropriately amend this Agreement and any related documents in order to reflect any such revised structure.

  • Permitted Alterations Tenant shall not make or permit any Alterations without the prior written consent of Landlord (which consent shall not be unreasonably withheld, conditioned or delayed). Notwithstanding the foregoing, in no event shall any Alterations (i) affect the exterior of the Building or the outside areas of the Property or the Building (or be visible from adjoining sites), (ii) affect or penetrate any of the structural portions of the Building, including, but not limited to, the roof, (iii) require any change to the basic floor plan of the Premises, any change to the structural or mechanical components of the Premises, or any governmental approval or permit as a prerequisite to the construction thereof, (iv) interfere in any manner with the proper functioning of or Landlord’s access to any mechanical, electrical, plumbing or HVAC systems, facilities or equipment located in or serving the Building, or (v) diminish the value of the Premises. All Alterations shall be constructed pursuant to plans and specifications previously provided to and, when applicable, approved in writing by Landlord, shall be installed by a licensed contractor at Tenant’s sole expense in compliance with all Applicable Laws, and shall be accomplished in a good and workmanlike manner conforming in quality and design with the Premises existing as of the Commencement Date and in accordance with the provisions of Section 22.1 below. No Hazardous Materials, including, but not limited to, asbestos or asbestos-containing materials, shall be used by Tenant or Tenant’s Agents in the construction or installation of any Alterations permitted hereunder. All Alterations made by Tenant shall be and become the property of Landlord upon the construction or installation thereof and shall not be deemed Tenant’s Personal Property; provided, however, that Landlord may, at its option and by notice delivered to Tenant at the time of Landlord’s approval, require that Tenant, upon the expiration or sooner termination of this Lease, at Tenant’s expense, remove any or all Alterations and return the Premises to its condition as of the Commencement Date, normal wear and tear excepted. Notwithstanding any other provisions of this Lease to the contrary, Tenant shall be solely responsible for the maintenance, repair and replacement of any and all Alterations made by or for the benefit of Tenant (including, without limitation, by Landlord for the benefit of Tenant). In addition, Tenant shall be responsible for the payment of any increase in Real Property Taxes that are attributable to any Alterations, which payment shall be made by Tenant to Landlord within ten (10) days following Landlord’s written demand therefor from time to time. Notwithstanding anything to the contrary in this Section 8.1, Tenant, without Landlord’s consent, may make minor Alterations to the Premises which do not affect the Building’s structure or operating systems and that do not cost more than $50,000.00 per project; provided however, Tenant shall provide notice no less than ten (10) business days’ notice of such Alterations.

  • Approved Working Drawings The Final Working Drawings shall be approved by Landlord (the “Approved Working Drawings”) prior to the commencement of construction of the Premises by Tenant. After approval by Landlord of the Final Working Drawings, Tenant may submit the same to the appropriate municipal authorities for all applicable building permits. Tenant hereby agrees that neither Landlord nor Landlord’s consultants shall be responsible for obtaining any building permit or certificate of occupancy for the Premises and that obtaining the same shall be Tenant’s responsibility; provided, however, that Landlord shall cooperate with Tenant in executing permit applications and performing other ministerial acts reasonably necessary to enable Tenant to obtain any such permit or certificate of occupancy. No changes, modifications or alterations in the Approved Working Drawings may be made without the prior written consent of Landlord, which consent may not be unreasonably withheld.

  • Selection of Architect/Construction Drawings Tenant shall retain an architect/space planner reasonably and mutually agreed upon by Landlord and Tenant (the “Architect”) to prepare the “Construction Drawings,” as that term is defined in this Section 3.1. The Contractor (as that term is defined in Section 4.1 of this Work Letter) shall provide design-build services from qualified, Landlord-approved mechanical, electrical and plumbing contractors for the preparation of plans and engineering working drawings related to the Improvements. Landlord hereby approves Gensler as the Architect if Tenant decides to select them. Tenant shall retain the engineering consultants designated by Landlord (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, HVAC, lifesafety, and sprinkler work in the Premises, which work is not part of the Base Building, provided that Tenant shall retain the subcontractors designated in Schedule 2 attached hereto for the fire alarm design and programming work (the “Fire Alarm Subcontractor”) and for building management systems (the “BMS Subcontractor”). Landlord hereby approves Gensler as the Engineer if Tenant decides to select them. Should Tenant choose to prepare fully engineered drawings in lieu of the design-build approach described above, then Tenant shall retain the Engineers to prepare all plans and engineering working drawings relating to the mechanical, electrical and plumbing work of the Improvements. The plans and drawings to be prepared by Architect, the design-build contractors (unless Tenant selects the fully engineered drawings approach described above), the Fire Alarm Subcontractor, the BMS Subcontractor and the Engineers hereunder shall be known collectively as the “Construction Drawings.” Landlord hereby approves Gensler and Revel to be the Architect if Tenant selects them. All Construction Drawings shall comply with the drawing format and specifications reasonably determined by Landlord, and shall be subject to Landlord’s reasonable approval. Tenant and Architect shall verify, in the field, the dimensions and conditions as shown on the relevant portions of the Base Building plans, and Tenant and Architect shall be solely responsible for the same, and Landlord shall have no responsibility in connection therewith. Landlord’s review of the Construction Drawings as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Construction Drawings are reviewed by Landlord or its space planner, architect, engineers and consultants, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord or Landlord’s space planner, architect, engineers, and consultants, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in the Construction Drawings, and Tenant’s waiver and indemnity set forth in the Lease, as amended, shall specifically apply to the Construction Drawings.

  • Construction Drawings After approving the Additional Programming Information, Landlord shall cause the Architect and the Engineers to prepare and deliver to Tenant Construction Drawings that conform to the approved Space Plan and the approved Additional Programming Information. Such preparation and delivery shall occur within 15 business days after the later of Landlord’s approval of the Additional Programming Information or the mutual execution and delivery of this Agreement. Tenant shall approve or disapprove the Construction Drawings by notice to Landlord. If Tenant disapproves the Construction Drawings, Tenant’s notice of disapproval shall specify any revisions Tenant desires in the Construction Drawings. After receiving such notice of disapproval, Landlord shall cause the Architect and/or the Engineers to revise the Construction Drawings, taking into account the reasons for Tenant’s disapproval (provided, however, that Landlord shall not be required to cause the Architect or the Engineers to make any revision to the Construction Drawings that is inconsistent with the Landlord Requirements or that Landlord otherwise reasonably disapproves), and resubmit the Construction Drawings to Tenant for its approval. Such revision and resubmission shall occur within five (5) business days after the later of Landlord’s receipt of Tenant’s notice of disapproval or the mutual execution and delivery of this Agreement if such revision is not material, and within such longer period of time as may be reasonably necessary (but not more than 15 business days after the later of such receipt or such mutual execution and delivery) if such revision is material. Such procedure shall be repeated as necessary until Tenant has approved the Construction Drawings. The Construction Drawings approved by Landlord and Tenant are referred to in this Work Letter as the “Approved Construction Drawings”.

  • SATELLITE DISH Subject to compliance with all applicable Legal Requirements, Tenant shall have the exclusive right to place, from time to time, satellite dishes, antennae and other communication or transmission devices (such devices being referred to as the “Satellite Dishes”) on the roof of each of the Buildings. Additionally, Tenant shall have the right to install such wire, conduits, cables and other materials as necessary to connect the Satellite Dishes to Tenant’s allied machinery and equipment in the Premises (the Satellite Dishes and any such connecting material being collectively referred to as the “Satellite Dish Facilities”). However, prior to the installation of any Satellite Dish Facilities, Tenant, at its expense, shall be required to provide Landlord with a certification by a registered professional structural engineer that the structural system of the roof is adequate to support the superimposed loads produced by any Satellite Dishes at the location on the roof of such Satellite Dishes and Tenant, at its expense, shall be required to provide Landlord with satisfactory assurance that the existing construction materials of the roof (such as the roof membrane) shall be protected from the Satellite Dishes. At the expiration or earlier termination of the Lease, Tenant, at its expense, may remove the Satellite Dish Facilities belonging to Tenant, but Tenant shall remove any Satellite Dish Facilities belonging to an unaffiliated third party. Any work required to restore the roof of any other part of the Buildings from any damage occasioned by the installation, maintenance or removal of the Satellite Dish Facilities shall be borne by Tenant, and Tenant shall indemnify and hold harmless Landlord from any costs, expenses, liabilities and the like, including reasonable attorneys’ fees, occasioned by any damage to property and injury or death to persons caused by such installation, maintenance or removal, except to the extent caused by the negligence, willful misconduct or breach of this Lease of Landlord. Tenant shall be responsible for the installation of all Satellite Dish Facilities (including the attachment thereto to the roof) and for all costs and expenses arising from and relating to the Satellite Dish Facilities and the installation, operation, maintenance and repair thereof, and, if Tenant elects to remove the Satellite Dish Facilities, or for those Satellite Dish Facilities for which removal is required, for the removal thereof. The installation, maintenance and removal of the Satellite Dish Facilities shall be performed by contractors and workers first approved by Landlord, which approval will not be unreasonably withheld or delayed. However, Landlord reserves the right to require Tenant, at Tenant’s expense, to use Landlord’s roofing contractor in connection therewith if, in Landlord’s reasonable judgment, the Landlord’s roof warranty may be affected by any such work. Landlord agrees that Tenant and engineering and maintenance personnel reasonably approved by Landlord shall have access to the Satellite Dish Facilities in order to install, operate, maintain, inspect and remove, as required, the Satellite Dish Facilities. Landlord shall not unreasonably interfere with or impair the use, operation, maintenance or repair of the Satellite Dish Facilities. Tenant may sublease to unaffiliated third parties rooftop rights for the installation of Satellite Dish Facilities, without Landlord’s consent, but Tenant shall give Landlord written notice of the existence of any such subleases from time to time upon Landlord’s request. All revenues derived from such third party subleases shall belong to Tenant. The Satellite Dish Facilities shall not be considered a part of the Premises for the purpose of determining Tenant’s rental obligations under the Lease and no Rent therefor shall be charged during the Term (including any renewal period specifically provided under this Lease). However, Tenant’s use of the Satellite Dish Facilities is otherwise subject to all of the terms and conditions of this Lease with respect to Tenant’s use and occupancy of the Premises, including, without limitation, Sections 9, 22 and 31.

  • Improvements; Alterations Improvements to the Premises shall be installed at Tenant’s expense only in accordance with plans and specifications which have been previously submitted to and approved in writing by Landlord, which approval shall be governed by the provisions set forth in this Section 8(a). No alterations or physical additions in or to the Premises may be made without Landlord’s prior written consent, which shall not be unreasonably withheld or delayed; however, Landlord may withhold its consent to any alteration or addition that would adversely affect (in the reasonable discretion of Landlord) the (1) Building’s Structure or the Building’s Systems (including the Building’s restrooms or mechanical rooms), (2) exterior appearance of the Building, (3) appearance of the Building’s common areas or elevator lobby areas, or (4) provision of services to other occupants of the Building. Tenant shall not paint or install lighting or decorations, signs, window or door lettering, or advertising media of any type visible from the exterior of the Premises without the prior written consent of Landlord, which consent may be withheld in Landlord’s sole and absolute discretion. All alterations, additions, and improvements shall be constructed, maintained, and used by Tenant, at its risk and expense, in accordance with all Laws; Landlord’s consent to or approval of any alterations, additions or improvements (or the plans therefor) shall not constitute a representation or warranty by Landlord, nor Landlord’s acceptance, that the same comply with sound architectural and/or engineering practices or with all applicable Laws, and Tenant shall be solely responsible for ensuring all such compliance.

  • Communications Equipment Members of the board of directors or any committee thereof may participate in and act at any meeting of such board or committee through the use of a conference telephone or other communications equipment by means of which all persons participating in the meeting can hear each other, and participation in the meeting pursuant to this section shall constitute presence in person at the meeting.

  • Benchmark Replacement Conforming Changes In connection with the use, administration, adoption or implementation of a Benchmark Replacement, the Administrative Agent will have the right to make Conforming Changes from time to time and, notwithstanding anything to the contrary herein or in any other Loan Document, any amendments implementing such Conforming Changes will become effective without any further action or consent of any other party to this Agreement or any other Loan Document.

  • Product Changes IDSI reserves the right to make design and other modifications in the Equipment at any time but shall not be obligated to implement such modifications in Equipment that has previously been delivered.

Time is Money Join Law Insider Premium to draft better contracts faster.