Freedom to Trade in Company Securities The Rights Agent and any stockholder, director, officer or employee of the Rights Agent may buy, sell or deal in any of the Rights or other securities of the Company or become pecuniarily interested in any transaction in which the Company may be interested, or contract with or lend money to the Company or otherwise act as fully and freely as though it were not Rights Agent under this Agreement. Nothing herein shall preclude the Rights Agent from acting in any other capacity for the Company or for any other legal entity.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Incorporators, Stockholders, Officers and Directors of Company Exempt from Individual Liability No recourse under or upon any obligation, covenant or agreement contained in this Indenture or any indenture supplemental hereto, or in any Security or any coupons appertaining thereto, or because of any indebtedness evidenced thereby, shall be had against any incorporator, as such or against any past, present or future stockholder, officer, director or employee, as such, of the Company or of any successor, either directly or through the Company or any successor, under any rule of law, statute or constitutional provision or by the enforcement of any assessment or by any legal or equitable proceeding or otherwise, all such liability being expressly waived and released by the acceptance of the Securities and the coupons appertaining thereto by the holders thereof and as part of the consideration for the issue of the Securities and the coupons appertaining thereto.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Foreign-Owned Companies in Connection with Critical Infrastructure If Texas Government Code, Section 2274.0102(a)(1) (relating to prohibition on contracts with certain foreign-owned companies in connection with critical infrastructure) is applicable to this Contract, pursuant to Government Code Section 2274.0102, Contractor certifies that neither it nor its parent company, nor any affiliate of Contractor or its parent company, is: (1) majority owned or controlled by citizens or governmental entities of China, Iran, North Korea, Russia, or any other country designated by the Governor under Government Code Section 2274.0103, or (2) headquartered in any of those countries.
Shareholder Information Services (i) Make information available to shareholder servicing unit and other remote access units regarding trade date, share price, current holdings, yields, and dividend information.
(ii) Produce detailed history of transactions through duplicate or special order statements upon request.
(iii) Provide mailing labels for distribution of financial reports, prospectuses, proxy statements or marketing material to current shareholders.
(iv) Respond as appropriate to all inquiries and communications from shareholders relating to shareholder accounts.
Closing of the Company’s Transfer Books At the Effective Time: (a) all shares of Company Common Stock outstanding immediately prior to the Effective Time shall automatically be canceled and retired and shall cease to exist, and all holders of certificates representing shares of Company Common Stock that were outstanding immediately prior to the Effective Time shall cease to have any rights as stockholders of the Company; and (b) the stock transfer books of the Company shall be closed with respect to all shares of Company Common Stock outstanding immediately prior to the Effective Time. No further transfer of any such shares of Company Common Stock shall be made on such stock transfer books after the Effective Time. If, after the Effective Time, a valid certificate previously representing any shares of Company Common Stock (a "Company Stock Certificate") is presented to the Exchange Agent (as defined in Section 1.7) or to the Surviving Corporation or Parent, such Company Stock Certificate shall be canceled and shall be exchanged as provided in Section 1.7.
Agreement to Provide Shareholder Information 1. Each Intermediary agrees to provide the Fund, upon written request, the following shareholder information with respect to Covered Transactions involving the Funds:
a. The taxpayer identification number (“TIN”) or any other government issued identifier, if known, that would provide acceptable assurances of the identity of each shareholder that has purchased, redeemed, transferred or exchanged shares of a Fund through an account directly maintained by the Intermediaries during the period covered by the request;
b. The amount and dates of, and the Variable Product(s) associated with, such shareholder purchases, redemptions, transfers and exchanges; and
c. Any other data mutually agreed upon in writing.
2. Under this Agreement the term “Covered Transactions” are those transactions which the Intermediaries consider when determining whether trading activity is excessive as described in their Excessive Trading Policy.
3. Requests to provide shareholder information shall set forth the specific period for which transaction information is sought. However, unless otherwise agreed to by the Intermediaries, any such request will not cover a period of more than 90 consecutive calendar days from the date of the request.
4. Each Intermediary agrees to provide the requested shareholder information promptly upon receipt of the request, but in no event later than 15 business days after receipt of such request, provided that such information resides in its books and records. If shareholder information is not on the Intermediary’s books and records, the Intermediary agrees to use reasonable efforts to obtain and transmit or have transmitted the requested information from the holder of the account.
Covenant Not to Solicit Employees The Executive agrees not to, directly or indirectly, solicit or employ the services of any officer or employee of the Bank (including an individual who was an officer or employee of the Bank during the one year period following the Executive’s termination) for one year after the Executive’s employment termination.
Raising of the Capital in Connection with the Initial Business Combination If (x) the Company issues additional Ordinary Shares or equity-linked securities for capital raising purposes in connection with the closing of its initial Business Combination at an issue price or effective issue price of less than $9.20 per Ordinary Share (with such issue price or effective issue price to be determined in good faith by the Board and, in the case of any such issuance to the Sponsor or its affiliates, without taking into account any Class B ordinary shares, par value $0.0001 per share, of the Company held by the Sponsor or such affiliates, as applicable, prior to such issuance) (the “Newly Issued Price”), (y) the aggregate gross proceeds from such issuances represent more than 60% of the total equity proceeds, and interest thereon, available for the funding of the Company’s initial Business Combination on the date of the completion of the Company’s initial Business Combination (net of redemptions), and (z) the volume-weighted average trading price of Ordinary Shares during the twenty (20) trading day period starting on the trading day prior to the day on which the Company consummates its initial Business Combination (such price, the “Market Value”) is below $9.20 per share, the Warrant Price shall be adjusted (to the nearest cent) to be equal to 115% of the higher of the Market Value and the Newly Issued Price, the $18.00 per share redemption trigger price described in Section 6.1 and Section 6.2 shall be adjusted (to the nearest cent) to be equal to 180% of the higher of the Market Value and the Newly Issued Price and the $10.00 per share redemption trigger price described in Section 6.2 shall be adjusted (to the nearest cent) to be equal to the higher of the Market Value and the Newly Issued Price.
