We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Institutional Supply Sample Clauses

Institutional Supply. Rs.25/- per KL up to 30 KL per 30 days. Rs.30/- per KL above 30 KL per 30 days. (i) For supply up to 2000 ltrs/day = Rs.1650/- per connection per 30 days.

Related to Institutional Supply

  • Institutional Arrangements 1. The AIA Council, as established by the AEM under the AIA Agreement, shall be responsible for the implementation of this Agreement. 2. The ASEAN Coordinating Committee on Investment (CCI) as established by the AIA Council and comprising senior officials responsible for investment and other senior officials from relevant government agencies, shall assist the AIA Council in the performance of its functions. The CCI shall report to the AIA Council through the Senior Economic Officials Meeting (SEOM). The ASEAN Secretariat shall be the secretariat for the AIA Council and the CCI. 3. The functions of the AIA Council shall be to: (a) provide policy guidance on global and regional investment matters concerning promotion, facilitation, protection, and liberalisation; (b) oversee, coordinate and review the implementation of this Agreement; (c) update the AEM on the implementation and operation of this Agreement; (d) consider and recommend to the AEM any amendments to this Agreement; (e) Update and endorse the Reservation Lists of this Agreement; (f) facilitate the avoidance and settlement of disputes arising from this Agreement; (g) supervise and coordinate the work of the CCI; (h) adopt any necessary decisions; and (i) carry out any other functions as the AEM may agree.

  • Institutional Certification Certification by the Submitting Institution that delineates, among other items, the appropriate research uses of the data and the uses that are specifically excluded by the relevant informed consent documents. Further information may be found here.

  • Institutional and Retail Sales You authorize the Manager to sell to institutions and retail purchasers such Securities purchased by you pursuant to the Underwriting Agreement as the Manager will determine. The Selling Concession on any such sales will be credited to the accounts of the Underwriters as the Manager will determine.

  • Report of Contract Purchases Contractor shall furnish quarterly reports containing total sales for both State Agency and other Authorized User contract purchases no later than thirty (30) days after the close of each calendar quarter using the form set out in Appendix E, Report of Contract Purchases. In addition to Contractor direct sales, Contractor shall submit sales information for all resellers, dealers, distributors or other authorized distribution channels, where such contract sales are provided by other than the Contractor. A separate report shall be provided for each authorized distribution channel. Contractors shall verify if each alternate vendor is a NYS certified minority- or women- owned business (MBE or WBE, respectively). Contractors shall verify such status through the Empire State Development minority- and women-owned businesses database at: xxxxx://xx.xxxxxxxxxxxxxx.xxx/frontend/diversityusers.asp.. The required reporting elements will be provided by OGS. Reports will consist of an itemized report of all services provided and invoiced, shall be forwarded electronically in Excel (.xls or .xlsx) Format to the OGS Centralized Contract Administrator containing the information requested within the attachment workbook. If appropriate means are integrated into the NYS Statewide Financial System (SFS) Portal to allow direct input of the required reporting information, submission of the Report of Contract Purchases will migrate to that venue and the Contractor will follow the reporting format established within the SFS Vendor Portal. Announcement of any such new capability and reporting requirement will be made via a purchasing memorandum which will be forwarded to Contractor.

  • Interconnection Request The Interconnection Customer’s request, in accordance with the Tariff, to interconnect a new Small Generating Facility, or to materially increase the capacity of, or make a material modification to the operating characteristics of, an existing Small Generating Facility that is interconnected with the New York State Transmission System or the Distribution System. For the purposes of this Agreement, this definition of Interconnection Request shall supersede the definition of Interconnection Request set out in Attachment X to the ISO OATT. Interconnection Study – Any study required to be performed under Sections 32.2 or 32.3 of the SGIP. Material Modification – A modification that has a material impact on the cost or timing of any Interconnection Request with a later queue priority date. New York State Transmission System – The entire New York State electric transmission system, which includes: (i) the Transmission Facilities under ISO Operational Control; (ii) the Transmission Facilities Requiring ISO Notification; and (iii) all remaining transmission facilities within the New York Control Area. NYISO Deliverability Interconnection Standard – The standard that must be met, unless otherwise provided for by Attachment S to the ISO OATT, by (i) any generation facility larger than 2MW in order for that facility to obtain XXXX; (ii) any Class Year Transmission Project proposing to interconnect to the New York State Transmission System and receive Unforced Capacity Delivery Rights; (iii) any entity requesting External XXXX Rights, and (iv) any entity requesting a XXXX transfer pursuant to Section 25.9.5 of Attachment S to the ISO OATT. To meet the NYISO Deliverability Interconnection Standard, the Interconnection Customer must, in accordance with the rules in Attachment S to the ISO OATT, fund or commit to fund any System Deliverability Upgrades identified for its project in the Class Year Deliverability Study. NYISO Minimum Interconnection Standard – The reliability standard that must be met by any generation facility or Class Year Transmission Project that is subject to NYISO’s Large Facility Interconnection Procedures in Attachment X to the ISO OATT or the NYISO’s Small Generator Interconnection Procedures in this Attachment Z, that is proposing to connect to the New York State Transmission System or Distribution System, to obtain ERIS. The Minimum Interconnection Standard is designed to ensure reliable access by the proposed project to the New York State Transmission System or to the Distribution System. The Minimum Interconnection Standard does not impose any deliverability test or deliverability requirement on the proposed interconnection. Operating Requirements – Any operating and technical requirements that may be applicable due to Regional Transmission Organization, Independent System Operator, control area, or the Connecting Transmission Owner’s requirements, including those set forth in the Small Generator Interconnection Agreement. Operating Requirements shall include Applicable Reliability Standards. Party or Parties – The NYISO, Connecting Transmission Owner, Interconnection Customer or any combination of the above. Point of Interconnection – The point where the Interconnection Facilities connect with the New York State Transmission System or the Distribution System. Reasonable Efforts – With respect to an action required to be attempted or taken by a Party under this Agreement, efforts that are timely and consistent with Good Utility Practice and are otherwise substantially equivalent to those a Party would use to protect its own interests. Small Generating Facility – The Interconnection Customer’s facility, no larger than 20 MW for the production and/or storage for later injection of electricity identified in the Interconnection Request if proposing to interconnect to the New York State Transmission System or Distribution System, but shall not include (i) facilities proposing to simply receive power from the New York State Transmission System or the Distribution System; (ii) facilities proposing to interconnect to the New York State Transmission System or the Distribution System made solely for the purpose of generation with no wholesale sale for resale nor to net metering; (iii) facilities proposing to the New York State Transmission System or the Distribution System made solely for the purpose of net metering; (iv) facilities proposing to interconnect to LIPA’s distribution facilities; and (v) the Interconnection Customer’s Interconnection Facilities. A facility will be treated as a single Small Generating Facility if all units within the facility are behind a single facility meter, even if such units are different technology types. System Deliverability Upgrades – The least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard for Capacity Resource Interconnection Service. System Upgrade Facilities – The least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modification or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff – The NYISO’s Open Access Transmission Tariff, as filed with the FERC, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Interconnection Customer is engaged in on- site test operations and commissioning of the Small Generating Facility prior to Commercial Operation. Upgrades – The required additions and modifications to the Connecting Transmission Owner’s portion of the New York State Transmission System or the Distribution System at or beyond the Point of Interconnection. Upgrades may be System Upgrade Facilities or System Deliverability Upgrades Distribution Upgrades. Upgrades do not include Interconnection Facilities.

  • EQUIPMENT PURCHASE This Schedule contemplates Lessor's acquisition of Equipment for lease to Lessee, either by one of the first three categories listed below or by providing Lessee with Equipment from the fourth category, in a value up to the Commitment Amount referred to on the face of this Schedule. If the Equipment acquired is of category (i), (ii) or (iii) below, the effectiveness of this Schedule as it relates to those items of Equipment is contingent upon Lessee's acknowledgment at the time Lessor acquires the Equipment that Lessee has either received or approved the relevant purchase documentation between vendor and Lessor for that Equipment. Lessor will finance only the acquisition of individual items of Equipment with a cost to Lessor of more than $500.00. (i) NEW ON-ORDER EQUIPMENT. Lessor will purchase new Equipment which is specifically approved by Lessor. (ii) SALE-LEASEBACK EQUIPMENT. Any in-place Equipment installed at Lessee's site and to which Lessee has clear title and ownership may be considered by Lessor for inclusion under this Lease (the "Sale-Leaseback Transaction"). Any request for Sale-Leaseback Transaction must be submitted to Lessor in writing (along with accompanying evidence of Lessee's Equipment ownership satisfactory to Lessor for all Equipment submitted) no later than the fifteenth day of the last month in each quarter and for equipment installed after the date hereof (except for the Equipment submitted on the second Sale- Leaseback Transaction) Lessor will not approve a Sale-Leaseback Transaction for Equipment which arrives ninety (90) days after the original purchase of the Equipment as evidenced by the invoice date. Further, the first Sale-Leaseback of Equipment will be placed on lease subject to: (1) Lessor prior approval of the Equipment; and (2) if approved, at Lessee's actual book value. The second Sale-Leaseback Transaction will be placed on lease subject to values established by Lessor based on the age of the Equipment. (iii) USED ON-ORDER EQUIPMENT. Lessor will purchase used Equipment which is obtained from a third party by Lessee for its use subject to Lessor's prior approval of the Equipment and at Lessor's appraised value for such used Equipment.

  • Equipment Purchases If this Agreement includes the purchase of equipment, this section is applicable. The JBE may, at its option, repair any damaged or replace any lost or stolen items and deduct the cost thereof from Contractor’s invoice to the JBE, or require Contractor to repair or replace any damaged, lost, or stolen equipment to the satisfaction of the JBE at no expense to the JBE. If a theft occurs, Contractor must file a police report immediately.

  • Initial Purchasers as Qualified Institutional Buyers Each Initial Purchaser severally and not jointly represents and warrants to, and agrees with, the Company that: (i) it will offer and sell Securities only to (a) persons who it reasonably believes are “qualified institutional buyers” within the meaning of Rule 144A (“Qualified Institutional Buyers”) in transactions meeting the requirements of Rule 144A or (b) upon the terms and conditions set forth in Annex I to this Agreement; (ii) it is an institutional “accredited investor” within the meaning of Rule 501(a)(1), (2), (3) or (7) under the Securities Act; and (iii) it will not offer or sell Securities by, any form of general solicitation or general advertising, including but not limited to the methods described in Rule 502(c) under the Securities Act.

  • Offering Materials Furnished to the Underwriters The Company has delivered to the Underwriters copies of the Registration Statement and of each consent and certificate of experts filed as a part thereof, and each preliminary prospectus and the Prospectus, as amended or supplemented, in such quantities and at such places as the Underwriters have reasonably requested in writing.

  • Investment Purpose As of the date hereof, the Buyer is purchasing the Note and the shares of Common Stock issuable upon conversion of or otherwise pursuant to the Note (including, without limitation, such additional shares of Common Stock, if any, as are issuable (i) on account of interest on the Note, (ii) as a result of the events described in Sections 1.3 and 1.4(g) of the Note or (iii) in payment of the Standard Liquidated Damages Amount (as defined in Section 2(f) below) pursuant to this Agreement, such shares of Common Stock being collectively referred to herein as the “Conversion Shares” and, collectively with the Note, the “Securities”) for its own account and not with a present view towards the public sale or distribution thereof, except pursuant to sales registered or exempted from registration under the 1933 Act; provided, however, that by making the representations herein, the Buyer does not agree to hold any of the Securities for any minimum or other specific term and reserves the right to dispose of the Securities at any time in accordance with or pursuant to a registration statement or an exemption under the 1933 Act.