Integrating resources (things, devices and tags Sample Clauses

Integrating resources (things, devices and tags. The architecture presented considers the core, the value chain/network from the end-product to the backend systems from the manufacturer, and the global ecosystem which encloses these. The Internet of Things ecosystem is composed not only of IPv6-enabled devices, tiny objects with communications and processing capabilities (so-called Smart Objects), but also of diverse species of objects. The sensors and actuators from the physical world have been developed to satisfy specific needs, such as RFID and NFC for transportation in terms of logistics and ticketing respectively. Healthcare devices used for continuous patient monitoring through wireless sensor networks, based on (for example) ZigBee Health Device Profile and Bluetooth have specific requirements and needs such as mobility, real-time, and reliability. Building and home automation with legacy technologies and proprietary protocols for lighting, heating, cooling, and security require real-time reaction and reliability. Smart meters and smart grid applications require mainly reliability. In the retail sector smart tags are replacing barcodes which require energy-efficiency, low-cost, real-time, and scalability. The aforementioned requirements have led to different technical alternatives and standards from ETSI such as M2M architectures focused on cellular networks. Whilst these provide support for reliability, they have low energy-efficiency, high cost and relatively poor scalability. IETF with the Working Groups ROLL, 6LoWPAN, CORE, LWIG, and COMA is focused on constrained devices and sensors to provide low cost protocols with high energy-efficiency and scalability, but with no mobility support. EPCGlobal for RFID provides low cost, real-time wireless identification, but the sensing capabilities are not standardized yet. Finally, the Handle System for Digital Object Identifiers offers low cost, real-time, identification and does not rely on a pre-defined medium to carry out the identification, (usually barcode or physical identification). This integration of the different resources is handled by digrectory which is responsible for collecting either by NFC, 6LoWPAN, Bluetooth or mDNS, the offered services by various devices that inhabit its domain. Digrectory can register these services as long as it knows the point of origin. Furthermore, the collected services are stored in a DNS file of bind9 program, allowing services to be consulted at all times through DNS. The following Figure presents the resou...
AutoNDA by SimpleDocs

Related to Integrating resources (things, devices and tags

  • Switching System Hierarchy and Trunking Requirements For purposes of routing ECI traffic to Verizon, the subtending arrangements between Verizon Tandem Switches and Verizon End Office Switches shall be the same as the Tandem/End Office subtending arrangements Verizon maintains for the routing of its own or other carriers’ traffic (i.e., traffic will be routed to the appropriate Verizon Tandem subtended by the terminating End Office serving the Verizon Customer). For purposes of routing Verizon traffic to ECI, the subtending arrangements between ECI Tandem Switches and ECI End Office Switches shall be the same as the Tandem/End Office subtending arrangements that ECI maintains for the routing of its own or other carriers’ traffic.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.

  • Commingling of Resold Services with Unbundled Network Elements and Combinations of Unbundled Network Elements 6.7.1 To the extent it is Technically Feasible and pursuant to the terms of Section 9.1, CLEC may Commingle Telecommunications Services purchased on a resale basis with an Unbundled Network Element or combination of Unbundled Network Elements.

  • Information and Services Required of the Owner § 3.1.1 The Owner shall provide information with reasonable promptness, regarding requirements for and limitations on the Project, including a written program which shall set forth the Owner’s objectives, constraints, and criteria, including schedule, space requirements and relationships, flexibility and expandability, special equipment, systems, sustainability and site requirements.

  • Access to Network Interface Device (NID 2.4.3.1. Due to the wide variety of NIDs utilized by BellSouth (based on subscriber size and environmental considerations), Mpower may access the on-premises wiring by any of the following means: BellSouth shall allow Mpower to connect its loops directly to BellSouth’s multi-line residential NID enclosures that have additional space and are not used by BellSouth or any other telecommunications carriers to provide service to the premise. Mpower agrees to install compatible protectors and test jacks and to maintain the protection system and equipment and to indemnify BellSouth pursuant to Section 8 of the General Terms and Conditions of this Agreement.

  • Technical Standards Applicable to a Wind Generating Plant i. Low Voltage Ride-Through (LVRT) Capability A wind generating plant shall be able to remain online during voltage disturbances up to the time periods and associated voltage levels set forth in the standard below. The LVRT standard provides for a transition period standard and a post-transition period standard.

  • Restricted Use By Outsourcers / Facilities Management, Service Bureaus or Other Third Parties Outsourcers, facilities management or service bureaus retained by Licensee shall have the right to use the Product to maintain Licensee’s business operations, including data processing, for the time period that they are engaged in such activities, provided that: 1) Licensee gives notice to Contractor of such party, site of intended use of the Product, and means of access; and 2) such party has executed, or agrees to execute, the Product manufacturer’s standard nondisclosure or restricted use agreement which executed agreement shall be accepted by the Contractor (“Non-Disclosure Agreement”); and 3) if such party is engaged in the business of facility management, outsourcing, service bureau or other services, such third party will maintain a logical or physical partition within its computer system so as to restrict use and access to the program to that portion solely dedicated to beneficial use for Licensee. In no event shall Licensee assume any liability for third party’s compliance with the terms of the Non-Disclosure Agreement, nor shall the Non-Disclosure Agreement create or impose any liabilities on the State or Licensee. Any third party with whom a Licensee has a relationship for a state function or business operation, shall have the temporary right to use Product (e.g., JAVA Applets), provided that such use shall be limited to the time period during which the third party is using the Product for the function or business activity.

  • Conversion of Wholesale Services to Network Elements or Network Elements to Wholesale Services Upon request, BellSouth shall convert a wholesale service, or group of wholesale services, to the equivalent Network Element or Combination that is available to Global Dialtone pursuant to Section 251 of the Act and under this Agreement or convert a Network Element or Combination that is available to Global Dialtone pursuant to Section 251 of the Act and under this Agreement to an equivalent wholesale service or group of wholesale services offered by BellSouth (collectively “Conversion”). BellSouth shall charge the applicable nonrecurring switch-as-is rates for Conversions to specific Network Elements or Combinations found in Exhibit A. BellSouth shall also charge the same nonrecurring switch-as-is rates when converting from Network Elements or Combinations. Any rate change resulting from the Conversion will be effective as of the next billing cycle following BellSouth’s receipt of a complete and accurate Conversion request from Global Dialtone. A Conversion shall be considered termination for purposes of any volume and/or term commitments and/or grandfathered status between Global Dialtone and BellSouth. Any change from a wholesale service/group of wholesale services to a Network Element/Combination, or from a Network Element/Combination to a wholesale service/group of wholesale services, that requires a physical rearrangement will not be considered to be a Conversion for purposes of this Agreement. BellSouth will not require physical rearrangements if the Conversion can be completed through record changes only. Orders for Conversions will be handled in accordance with the guidelines set forth in the Ordering Guidelines and Processes and CLEC Information Packages as referenced in Sections 1.13.1 and 1.13.2 below.

  • Services and Third Party Materials A. The tvOS Software may enable access to Apple’s iTunes Store, App Store, Game Center, iCloud and other Apple and third party services, and web sites (collectively and individually, “Services”). Such Services may not be available in all languages or in all countries. Use of these Services requires Internet access and use of certain Services may require an Apple ID, may require you to accept additional terms and may be subject to additional fees. By using this software in connection with an Apple ID, or other Apple Service, you agree to the applicable terms of service for that Service, such as the latest iTunes Store Terms and Conditions, which you may access and review at xxxx://xxx.xxxxx.xxx/legal/itunes/ ww/.

  • Required Coverages For Generation Resources Of 20 Megawatts Or Less Each Constructing Entity shall maintain the types of insurance as described in section 11.1 paragraphs (a) through (e) above in an amount sufficient to insure against all reasonably foreseeable direct liabilities given the size and nature of the generating equipment being interconnected, the interconnection itself, and the characteristics of the system to which the interconnection is made. Additional insurance may be required by the Interconnection Customer, as a function of owning and operating a Generating Facility. All insurance shall be procured from insurance companies rated “A-,” VII or better by AM Best and authorized to do business in a state or states in which the Interconnection Facilities are located. Failure to maintain required insurance shall be a Breach of the Interconnection Construction Service Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.