Issue of a Services Order Sample Clauses

Issue of a Services Order. (a) If DFAT accepts the Individual’s Quotation, DFAT will complete and send to the Individual a Services Order substantially in the form of Schedule 3C (Services Order Template). (b) Upon receipt of a Services Order, the Individual must execute the Services Order and return it to DFAT within five (5) Business Days for counter-signing. (c) A Contract is formed when DFAT and the Individual have signed the Services Order. (d) The Individual must fulfil all Contracts entered into during the Deed Period on the conditions current at the time the Contract is made notwithstanding that completion of the Contract may occur after the date on which this Deed expire s.
Sample 1
AutoNDA by SimpleDocs

Related to Issue of a Services Order

  • Placement of DNS probes Probes for measuring DNS parameters shall be placed as near as possible to the DNS resolvers on the networks with the most users across the different geographic regions; care shall be taken not to deploy probes behind high propagation-­‐delay links, such as satellite links.

  • Borrowing Procedures Each Swing Line Borrowing shall be made upon the Borrower’s irrevocable notice to the Swing Line Lender and the Administrative Agent, which may be given by telephone. Each such notice must be received by the Swing Line Lender and the Administrative Agent not later than 1:00 p.m. on the requested borrowing date, and shall specify (i) the amount to be borrowed, which shall be a minimum of $100,000, and (ii) the requested borrowing date, which shall be a Business Day. Each such telephonic notice must be confirmed promptly by delivery to the Swing Line Lender and the Administrative Agent of a written Swing Line Loan Notice, appropriately completed and signed by a Responsible Officer of the Borrower. Promptly after receipt by the Swing Line Lender of any telephonic Swing Line Loan Notice, the Swing Line Lender will confirm with the Administrative Agent (by telephone or in writing) that the Administrative Agent has also received such Swing Line Loan Notice and, if not, the Swing Line Lender will notify the Administrative Agent (by telephone or in writing) of the contents thereof. Unless the Swing Line Lender has received notice (by telephone or in writing) from the Administrative Agent (including at the request of any Lender) prior to 2:00 p.m. on the date of the proposed Swing Line Borrowing (A) directing the Swing Line Lender not to make such Swing Line Loan as a result of the limitations set forth in the proviso to the first sentence of Section 2.04(a), or (B) that one or more of the applicable conditions specified in Article IV is not then satisfied, then, subject to the terms and conditions hereof, the Swing Line Lender will, not later than 3:00 p.m. on the borrowing date specified in such Swing Line Loan Notice, make the amount of its Swing Line Loan available to the Borrower at its office by crediting the account of the Borrower on the books of the Swing Line Lender in immediately available funds.

  • Competitive Supplier’s Standard Credit Policy The Competitive Supplier will not require a credit review for any consumer participating in the Program, nor does Competitive Supplier require any consumer to post any security deposit as a condition for participation in the Program. The Competitive Supplier may terminate service to a Participating Consumer and return such consumer to Basic Service in the event that the consumer fails to pay to Competitive Supplier amounts past-due greater than sixty (60) days.

  • Procedures for Advances (a) In the case of the making of any Advance, the repayment of any Advance, or any termination, increase or reduction of the Facility Amount and prepayments of Advances, the Borrower shall give the Administrative Agent a Borrower Notice. Each Borrower Notice shall specify the amount (subject to Section 2.1 hereof) of Advances to be borrowed or repaid and the Funding Date or repayment date (which, in all cases, shall be a Business Day) and whether such Advance is a Revolver Advance or a Swing Advance. (b) Subject to the conditions described in Section 2.1, the Borrower may request an Advance from the Lenders by delivering to the Administrative Agent at certain times the information and documents set forth in this Section 2.2. (c) No later than 12:00 noon (New York, New York time) five (5) Business Days prior to the proposed Funding Date for a Revolver Advance (or such shorter period of time or later date as may be agreed to by the Required Lenders), the Borrower shall notify (i) the Collateral Custodian by delivery to the Collateral Custodian of written notice of such proposed Funding Date, and (ii) the Administrative Agent by delivery to the Administrative Agent of a credit report and transaction summary for each Loan that is the subject of the proposed Advance setting forth the credit underwriting by the Originator of such Loan, including without limitation a description of the Obligor and the proposed loan transaction in the form of Exhibit M hereto; provided that, in the case of Advances funding Revolver Loans, the requirements of this Section 2.2(c) shall apply only with respect to the first Advance to be made with respect to each such Revolver Loan. By 5:00 p.m. (New York, New York time) on the next Business Day, the Administrative Agent shall use its best efforts to confirm to the Borrower the receipt of such items and whether it has reviewed such items and found them to be complete and in proper form. If the Administrative Agent makes a determination that the items are incomplete or not in proper form, it will communicate such determination to the Borrower. Failure by the Administrative Agent to respond to the Borrower by 5:00 p.m. (New York, New York time) on the day the related Funding Request is delivered by the Borrower shall constitute an implied determination that the items are incomplete or not in proper form. The Borrower will take such steps requested by the Administrative Agent to correct the problem(s). In the event of a delay in the actual Funding Date due to the need to correct any such problems, the Funding Date shall be no earlier than two (2) Business Days after the day on which the Administrative Agent confirms to the Borrower that the problems have been corrected. (d) No later than 1:00 p.m. (New York, New York time) one (1) Business Day prior to the proposed Funding Date for a Revolver Advance (or such shorter period of time or later date as may be agreed to by the Required Lenders), the Administrative Agent, each Managing Agent and the Collateral Custodian, as applicable, shall receive or shall have previously received the following: (i) a Funding Request in the form of Exhibit A; (ii) a wire disbursement and authorization form shall be delivered to the Administrative Agent; and (iii) a certification substantially in the form of Exhibit H concerning the Collateral Custodian’s receipt of certain documentation relating to the Eligible Loan(s) related to such Advance shall be delivered to the Administrative Agent, which may be delivered either as a separate document or incorporated in the Monthly Report. Each Funding Request for a Revolver Advance shall specify the aggregate amount of the requested Advance, which shall be in an amount equal to at least $500,000. (e) No later than 12:00 noon (New York, New York time) on the Business Day proposed for a Swing Advance, the Administrative Agent shall receive or shall have previously received the following: (i) a Funding Request in the form of Exhibit A; and (ii) a wire disbursement and authorization form. (f) Each Funding Request shall be accompanied by (i) a Borrower Notice, depicting the outstanding amount of Advances under this Agreement and representing that all conditions precedent for a funding have been met, including a representation by the Borrower that the requested Advance shall not, on the Funding Date thereof, exceed the Availability on such day, (ii) a calculation of the Borrowing Base as of the applicable Funding Date (which calculation may, for avoidance of doubt, take into account (A) Loans which will become Transferred Loans on or prior to such Funding Date and (B) an updated Loan List including each Loan that is subject to the requested Advance, (C) the proposed Funding Date, and (D) wire transfer instructions for the Advance; provided, however, the Funding Request for a Swing Advance shall be required to contain only the information described in Section 2.2(e)(i) and (ii) above. A Funding Request shall be irrevocable when delivered; provided however, that if the Borrowing Base calculation delivered pursuant to clause (ii) above includes a Loan which does not become a Transferred Loan on or before the applicable Funding Date as anticipated, and the Borrower cannot otherwise make the representations required pursuant to clause (i) above, the Borrower shall revise the Funding Request accordingly, and shall pay any loss, cost or expense incurred by any Lender in connection with the broken funding evidenced by such revised Funding Request. (g) On the Funding Date following the satisfaction of the applicable conditions set forth in this Section 2.2 and Article III, the Lenders shall make available to the Administrative Agent at its address listed beneath its signature on its signature page to this Agreement (or on the signature page to the Joinder Agreement pursuant to which it became a party hereto), for deposit to the account of the Borrower or its designee in same day funds, at the account specified in the Funding Request, an amount equal to such Lender’s ratable share of the Advance then being made (except that in the case of a Swing Advance, the Swingline Lender will make available to the Borrower the amount of any such Swing Advance). Each wire transfer of an Advance to the Borrower shall be initiated by the applicable Lender no later than 3:00 p.m. (New York, New York time) on the applicable Funding Date.

  • Project Delivery Order Procedures The TIPS Member having approved and signed an interlocal agreement, or other TIPS Membership document, may make a request of the awarded vendor under this Agreement when the TIPS Member has services that need to be undertaken. Notification may occur via phone, the web, email, fax, or in person. Upon notification of a pending request, the awarded vendor shall make contact with the TIPS Member as soon as possible, but must make contact with the TIPS Member within two working days. Scheduling of projects (if applicable) may be accomplished when the TIPS Member issues a Purchase Order and/or an Agreement or Contract that will serve as “the notice to proceed” as agreed by the Vendor and the TIPS Member. The period for the delivery order will include the mobilization, materials purchase, installation and delivery, design, weather, and site cleanup and inspection. No additional claims may be made for delays as a result of these items. When the tasks have been completed the awarded vendor shall notify the client and have the TIPS Member or a designated representative of the TIPS Member inspect the work for acceptance under the scope and terms in the Purchase Order and/or Agreement or Contract. The TIPS Member will issue in writing any corrective actions that are required. Upon completion of these items, the TIPS Member will issue a completion notice and final payment will be issued per the contractual requirements of the project with the TIPS Member. Any Construction contract prepared by the TIPS Member’s Legal Counsel may alter the terms of this subsection, “Scheduling of Projects”.

  • Proposed Goods and Services Proposed Goods and Services pdf D/M/WBE Certification OPTIONAL No response Warranty No response

  • Borrowing Procedures and Settlements (a) Each Revolving Facility Borrowing or a Borrowing of Other Revolving Loans shall be made by a written request by an Authorized Person delivered to the Administrative Agent (which may be delivered through the Administrative Agent’s electronic platform or portal) and received by the Administrative Agent no later than 1:00 p.m., Local Time, (i) on the Business Day that is the requested funding date in the case of a request for a Swingline Borrowing, (ii) on the Business Day that is one Business Day prior to the requested funding date in the case of a request for an ABR Borrowing, and (iii) on the Business Day that is three Business Days prior to the requested funding date in the case of all other requests, specifying (A) the amount of such Borrowing, and (B) the requested funding date (which shall be a Business Day); provided that the Administrative Agent may, in its sole discretion, elect to accept as timely requests that are received later than 1:00 p.m., Local Time, on the applicable Business Day. All Borrowing requests which are not made on-line via the Administrative Agent’s electronic platform or portal shall be subject to (and unless the Administrative Agent elects otherwise in the exercise of its sole discretion, such Borrowing shall not be made until the completion of) the Administrative Agent’s authentication process (with results satisfactory to the Administrative Agent) prior to the funding of any such requested Loan. Each such Borrowing request shall specify the following information in compliance with Section 2.02: (i) the aggregate amount of the requested Borrowing, which amount shall not result in the Revolving Facility Credit Exposure exceeding the Borrowing Base; (ii) the date of such Borrowing, which shall be a Business Day; (iii) whether such Borrowing is to be an ABR Borrowing or a Eurocurrency Borrowing; (iv) in the case of a Eurocurrency Borrowing, the initial Interest Period to be applicable thereto, which shall be a period contemplated by the definition of the term “Interest Period”; and (v) the location and number of the Borrower’s account to which funds are to be disbursed. If no election as to the Type of Revolving Facility Borrowing is specified, then the requested Revolving Facility Borrowing shall be an ABR Borrowing. If no Interest Period is specified with respect to any requested Eurocurrency Borrowing, then the Borrower shall be deemed to have selected an Interest Period of one month’s duration. Promptly following receipt of a Borrowing request in accordance with this Section 2.03(a), the Administrative Agent shall advise each Lender of the details thereof and of the amount of such Lender’s Loan to be made as part of the requested Borrowing.

  • Subcontracting for Medicaid Services Notwithstanding any permitted subcontracting of services to be performed under this Agreement, Party shall remain responsible for ensuring that this Agreement is fully performed according to its terms, that subcontractor remains in compliance with the terms hereof, and that subcontractor complies with all state and federal laws and regulations relating to the Medicaid program in Vermont. Subcontracts, and any service provider agreements entered into by Party in connection with the performance of this Agreement, must clearly specify in writing the responsibilities of the subcontractor or other service provider and Party must retain the authority to revoke its subcontract or service provider agreement or to impose other sanctions if the performance of the subcontractor or service provider is inadequate or if its performance deviates from any requirement of this Agreement. Party shall make available on request all contracts, subcontracts and service provider agreements between the Party, subcontractors and other service providers to the Agency of Human Services and any of its departments as well as to the Center for Medicare and Medicaid Services.

  • Reply Procedures In connection with any Auction, each Lender holding the relevant Term Loans subject to such Auction may, in its sole discretion, participate in such Auction and may provide the Auction Agent with a notice of participation (the “Return Bid”) which shall be in a form reasonably acceptable to the Auction Agent, and shall specify (i) a discount to par (that must be expressed as a price at which it is willing to sell all or any portion of such Term Loans) (the “Reply Price”), which (when expressed as a percentage of the par principal amount of such Term Loans) must be within the Discount Range and (ii) a principal amount of such Term Loans, which must be in whole increments of $1,000,000 (or, in any case, such lesser amount of such Term Loans of such Lender then outstanding or which is otherwise reasonably acceptable to the Auction Agent) (the “Reply Amount”). Lenders may only submit one Return Bid per Auction, but each Return Bid may contain up to three bids only one of which may result in a Qualifying Bid. In addition to the Return Bid, the participating Lender must execute and deliver, to be held in escrow by the Auction Agent, an Assignment and Assumption with the dollar amount of the Term Loans to be assigned to be left in blank, which amount shall be completed by the Auction Agent in accordance with the final determination of such Lender’s Qualifying Bid pursuant to clause (c) below. Any Lender whose Return Bid is not received by the Auction Agent by the Auction Response Date shall be deemed to have declined to participate in the relevant Auction with respect to all of its Term Loans.

  • DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!