IT Hardware Repair Sample Clauses
IT Hardware Repair. Repairs to Government-owned IT equipment such as personal computers, word processing equipment, fax machine and printers.
MAINTENANCE & REPAIR Tenant agrees that if there is any delay in maintenance or repairs for reasons beyond Landlord's control, this shall have no effect on Tenant's obligations under this lease.
Maintenance & Repairs 5.1 Lessee shall at all times be responsible for maintaining at its own expense the leased premises in a clean, orderly and safety condition, except as hereinafter provided. Lessee shall be responsible, at its own expense, to clean and maintain all trade fixtures, machinery and equipment furnished by Lessee within the leased premises. Lessee shall be responsible to deposit normal office waste and rubbish at a location at the Central School as designated by Lessor. 5.2 Lessee shall be responsible to perform all repairs the need for which is caused by Xxxxxx's use of the premises except that Lessor shall be responsible to perform major repairs of a structural nature. Lessor shall be responsible to arrange for removal of waste and rubbish from the location designated as the deposit location for lessees. All costs incurred by Lessor pursuant to the obligations of this Paragraph shall be included within "operating costs". 5.3 Lessor shall provide custodian services for the common areas of Central School. Costs incurred by Lessor in providing such custodian services shall be included within "operating costs".
Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.
Repair Concessionaire shall, prior to the commencement of the Concession Operation under this Agreement, provide to Department a type-written concession equipment maintenance plan for the State-owned equipment located on the Concession Premises, together with a schedule for preventative maintenance and a report on maintenance completion and equipment condition. Failure to comply with this preventative maintenance schedule shall result in Concessionaire being responsible for all repairs and/or replacement of equipment. The review and Department inspection of the Concession Premises and its equipment will be conducted during routine inspection of the Concession Premises and as a part of the Mandatory Compliance and Performance Evaluation Meetings.
Customer Equipment “Customer Equipment” means any Customer-owned or provided software, hardware or services that you elect to use in connection with the Service(s). You agree to allow us and our agents the rights to insert CableCARDs and other hardware in the Customer Equipment, send software and/or downloads to the Customer Equipment and install, configure, maintain, inspect and upgrade the Customer Equipment. You warrant you are either the owner of the Customer Equipment or that you have the authority to give us access to the Customer Equipment. You should call Customer Service at 0-000-XXX-XXXX to find out if it meets our technical, security and other requirements. We reserve the right to disallow the use of Customer Equipment that we determine is not compatible with our network. We shall have no obligation to provide, maintain, or service Customer Equipment, including, but not limited to, Customer Equipment to which the Company or a third party has sent software or downloads. If you use Customer Equipment, you agree that the following limitation of liability shall apply: THE COMPANY DOES NOT WARRANT THAT CUSTOMER EQUIPMENT WILL ENABLE YOU TO SUCCESSFULLY INSTALL, ACCESS, OPERATE, OR USE THE SERVICE(S). YOU ACKNOWLEDGE THAT ANY SUCH INSTALLATION, ACCESS, OPERATION, OR USE COULD CAUSE CUSTOMER EQUIPMENT TO FAIL TO OPERATE OR COULD CAUSE DAMAGE TO CUSTOMER EQUIPMENT, YOU, YOUR PREMISES OR COMPANY EQUIPMENT. NEITHER THE COMPANY NOR ANY OF ITS AFFILIATES, SUPPLIERS OR AGENTS SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY SUCH FAILURE OR DAMAGE, INCLUDING LACK OF 911/E911 CAPABILITY OR DIALING ASSOCIATED WITH A SECURITY SYSTEM. YOUR USE OF CUSTOMER EQUIPMENT MAY PREVENT PROVISION OF SERVICE. The foregoing limitation of liability is in addition to and shall not limit any other limitation of liability set forth in this Agreement.
Installation When installation is required, the Contractor shall be responsible for placing and installing the Commodities or parts in the required locations at no additional charge. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the Commodity or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, tools, rigging, labor, and materials required to install or replace the Commodities or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.
Installation Services The Bitstream 2a Service includes a Standard Install as set out below (in each case to the extent that the relevant provisioning works are not already complete for the relevant Service Order).1
Repair or Replacement (i) In the event of a Casualty or Taking between the Effective Date and the Closing Date, Seller shall elect, at its option, to either (A) repair or replace or make adequate provision for the repair or replacement of the Damaged Portion of the Purchased Assets at Seller’s cost prior to the Closing, in which case Buyer’s obligation to effect the Closing shall not be affected, but the Closing Date (and the End Date, if necessary) shall be deferred until three (3) Business Days after repairs 38 or replacement have been completed and the Damaged Portion of the Purchased Assets is fully repaired or restored to the condition thereof immediately prior to such Casualty or Taking in accordance with applicable Laws or Orders, or (B) negotiate with Buyer to reduce the Purchase Price to reflect the cost to repair or replace the Damaged Portion of the Purchased Assets and the post-Closing loss of net income associated with such business interruption (such repair or replacement costs and loss of net income, the “Repair Costs”). Notwithstanding the foregoing, Seller’s election in clause (A) of this Section 8.5(b)(i) shall be unavailable and clause (B) of this Section 8.5(b)(i) shall apply if the Damaged Portion of the Purchased Assets cannot reasonably be expected to be fully repaired or restored to the condition thereof immediately prior to such Casualty or Taking in accordance with applicable Laws or Orders on or before the date that is 180 days following the occurrence of the Casualty or Taking (the “Casualty Event Termination Date”) (ii) If Seller and Buyer agree on the Repair Costs within fifteen (15) days of Buyer’s receipt of Seller’s notice of the Casualty or Taking (the “Repair Negotiation Period”), Buyer’s obligation to effect the Closing shall not be affected, but the Purchase Price shall be reduced by the Repair Costs so agreed. (iii) If Seller and Buyer do not agree on the Repair Costs within the Repair Negotiation Period (a “Repair Cost Dispute”), Buyer or Seller may request an engineering company (and/or other appropriate specialist) that shall be mutually agreed to by Buyer and Seller to evaluate the Damaged Portion of the Purchased Assets and the loss of net income associated with such business interruption and deliver to Buyer and Seller its written estimate of the Repair Costs (the “Third-Party Estimate”) within fifteen (15) days after the end of the Repair Negotiation Period. If the Third-Party Estimate is less than the Buyer Casualty Threshold (or greater than the Buyer Casualty Threshold or Seller Casualty Threshold, as applicable, and neither party terminates the Agreement as permitted pursuant to Section 8.5(b)(iv)), Buyer’s obligation to effect the Closing shall not be affected and Buyer and Seller shall mutually resolve the Repair Cost Dispute after the Closing in accordance with the provisions of Section 2.3 (and, for the avoidance of doubt, the engineering company or other appropriate specialist shall be deemed to be the Inspector for purposes of Section 2.3), with a post-Closing adjustment to the Purchase Price equal to the finally-determined Repair Costs. (iv) Notwithstanding the foregoing, and subject to Section 8.5(f), if the Repair Costs as agreed to by Buyer and Seller or the Third-Party Estimate, as applicable, (A) is equal to or greater than the Buyer Casualty Threshold, Buyer may elect, by giving Seller written notice of election within fifteen (15) days of receipt of the Third-Party Estimate, or (B) is equal to or greater than the Seller Casualty Threshold, Seller may elect, by giving Buyer written notice of election within fifteen (15) days of receipt of the Third Party Estimate, to terminate this Agreement without further obligation hereunder, except as provided in Section 11.2.
Cost of Repairs 54.1 Loss or damage to the Works or Materials to be incorporated in the Works between the Start Date and the end of the Defects Correction periods shall be remedied by the Contractor at the Contractor's cost if the loss or damage arises from the Contractor's acts or omissions.
Equipment Cleaning (a) Areas, known by Forest Service prior to timber sale advertisement, that are infested with invasive species of concern are shown on Sale Area Map. A current list of invasive species of concern and a map showing the extent of known infestations is available at the Forest Supervisor’s Office. For purposes of this provision, “Off-Road Equipment” includes all logging and construction machinery, except for log trucks, chip vans, service vehicles, water trucks, pickup trucks, cars, and similar vehicles.