Common use of Limitations of Operation Clause in Contracts

Limitations of Operation. When mowing within ten (10) feet of traveled roadway, all equipment will be operated in the direction of the flow of traffic. This provision does not apply when flaggers and warning signs in accordance with the Manual on Uniform Traffic Control Devices protect the specific work site. When boom-type slope mowers are operated on the shoulder, a flagger will be stationed to warn other traffic and assist the operations. Warning signs will be placed in accordance with the most current edition of the Florida Department of Transportation's "Roadway and Traffic Design Standards" for Design, Construction, Maintained Systems and the "Manual on Uniform Traffic Control Devices for Streets and Highways." When mowers are crossing the traveled roadway or bridges, flaggers will be provided. When necessary for mowing machines to cross bridges with full width shoulders on the right, the crossing should be made on the shoulder. All bridges should be crossed with extreme care and operations planned to reduce such crossings to a minimum. When necessary for mowing machines to cross the traveled roadway, a location will be selected that provides an unobstructed sight distance of five hundred (500) feet. The operator will stop before crossing the roadway and permit closely approaching vehicles to pass before crossing. Operations will be planned to minimize crossings. Equipment left on the right-of-way or County property after designated work hours will be placed outside the clear and recovery area and will be the sole responsibility of the Contractor. If equipment is left on the right-of-way, it will be marked with a barricade etc. and with approved steady burning amber lights. All service and supply operations will be conducted outside the clear and recovery area. No supply vehicles will enter the median for any purpose. No service vehicle will enter the median unless necessary to repair or remove inoperable equipment.

Limitations of Operation. When mowing within ten (10) feet of traveled roadway, all equipment will be operated in the direction of the flow of traffic. This provision does not apply when flaggers and warning signs in accordance with the Manual on Uniform Traffic Control Devices protect the specific work site. When boom-type slope mowers are operated on the shoulder, a flagger will be stationed to warn other traffic and assist the operations. Warning signs will be placed in accordance with the most current edition of the Florida Department of Transportation's "Roadway and Traffic Design Standards" for Design, Construction, Maintained Systems and the "Manual on Uniform Traffic Control Devices for Streets and Highways." When mowers are crossing the traveled roadway or bridges, flaggers will be provided. When necessary for mowing machines to cross bridges with full width shoulders on the right, the crossing should shall be made on the shoulder. All bridges should be crossed with extreme care and operations planned to reduce such crossings to a minimum. When necessary for mowing machines to cross the traveled roadway, a location will shall be selected by the Contractor that provides an unobstructed sight distance of five hundred (500) feet. The operator will stop before crossing the roadway and permit closely approaching vehicles to pass before crossing. Operations will be planned by the Contractor to minimize crossings. Equipment left on the right-of-way or County property by the Contractor after designated work hours will shall be placed outside the clear and recovery area and will be the sole responsibility of the Contractor. If equipment is left on the right-of-wayway by the Contractor, it will shall be marked with a barricade etc. and with approved steady burning amber lights. All service and supply operations will shall be conducted outside the clear and recovery area. No supply vehicles will enter the median for any purpose. No service vehicle will enter the median unless necessary to repair or remove inoperable equipment.

Limitations of Operation. When mowing within ten (10) feet of traveled roadway, all equipment will be operated in the direction of the flow of traffictraffic by the Contractor. This provision does not apply when flaggers and warning signs in accordance with the Manual on Uniform Traffic Control Devices protect the specific work site. When boom-type slope mowers are operated on the shoulder, a flagger will be stationed by the Contractor to warn other traffic and assist the operations. Warning signs will be placed by the Contractor in accordance with the most current edition of the Florida Department of Transportation's "Roadway and Traffic Design Standards" for Design, Construction, Maintained Systems and the "Manual on Uniform Traffic Control Devices for Streets and Highways." When mowers are crossing the traveled roadway or bridges, flaggers will be provided. When necessary for mowing machines to cross bridges with full width shoulders on the right, the crossing should be made on the shoulder. All bridges should be crossed with extreme care and operations planned to reduce such crossings to a minimum. When necessary for mowing machines to cross the traveled roadway, a location will be selected by the Contractor that provides an unobstructed sight distance of five hundred (500) feet. The operator will stop before crossing the roadway and permit closely approaching vehicles to pass before crossing. Operations will be planned to minimize crossings. Equipment left on the right-of-way or County property after designated work hours will be placed outside the clear and recovery area and will be the sole responsibility of the Contractor. If equipment is left on the right-right- of-way, it will be marked with a barricade etc. and with approved steady burning amber lights. All service and supply operations will be conducted outside the clear and recovery area. No supply vehicles will shall enter the median for any purpose. No service vehicle will shall enter the median unless necessary to repair or remove inoperable equipment.

Limitations of Operation. When mowing within ten (10) feet of a traveled roadway, all equipment will shall be operated in the direction of the flow of traffic. This provision does not apply when flaggers and warning signs in accordance with the Manual on Uniform Traffic Control Devices protect the specific work site. When boom-type slope mowers are operated on the shoulder, a flagger will flagging operations procedures shall be stationed followed to warn other traffic and assist the operations. Warning signs will be placed in accordance with the most current edition of the Florida Department of Transportation's "Roadway and Traffic Design Standards" for Design, Construction, Maintained Systems and the "Manual on Uniform Traffic Control Devices for Streets and Highways." When mowers are crossing the traveled roadway or bridges, flaggers will be provided. When necessary for mowing machines to cross bridges with full width shoulders on the right, the crossing should be made on the shoulder. All bridges should be crossed with extreme care and operations planned to reduce such crossings to a minimum. When necessary for mowing machines to cross the traveled roadway, a location will be selected that provides an unobstructed sight distance of five hundred (500) feet. The operator will stop before crossing the roadway and permit closely approaching vehicles to pass before crossing. Operations will be planned to minimize crossings. Equipment left on the right-of-way or County property after designated work hours will be placed outside the clear and recovery area and will be the sole responsibility of the Contractor. If equipment is left on the right-of-of- way, it will be marked with a barricade etc. and with approved steady burning amber lights. All service and supply operations will be conducted outside the clear and recovery area. No supply vehicles will enter the median private property for any purpose. No service vehicle will enter the median private property unless necessary to repair or remove inoperable equipment.

Limitations of Operation. When mowing within ten (10) feet of traveled roadway, all equipment will shall be operated in the direction of the flow of traffic. This provision does not apply when flaggers and warning signs in accordance with the Manual on Uniform Traffic Control Devices protect the specific work site. When boom-type slope mowers are operated on the shoulder, a flagger will shall be stationed to warn other traffic and assist the operations. Warning signs will shall be placed in accordance with the most current edition of the Florida Department of Transportation's "Roadway and Traffic Design Standards" for Design, Construction, Maintained Systems and the "Manual on Uniform Traffic Control Devices for Streets and Highways." When mowers are crossing the traveled roadway or bridges, flaggers will shall be provided. When necessary for mowing machines to cross bridges with full width shoulders on the right, the crossing should shall be made on the shoulder. All bridges should shall be crossed with extreme care and operations planned to reduce such crossings to a minimum. When necessary for mowing machines to cross the traveled roadway, a location will shall be selected that provides an unobstructed sight distance of five hundred (500) feet. The operator will shall stop before crossing the roadway and permit closely approaching vehicles to pass before crossing. Operations will shall be planned to minimize crossings. Equipment left on the right-of-way or County property after designated work hours will shall be placed outside the clear and recovery area and will shall be the sole responsibility of the Contractor. If equipment is left on the right-of-way, it will shall be marked with a barricade etc. and with approved steady burning amber lights. All service and supply operations will shall be conducted outside the clear and recovery area. No supply vehicles will shall enter the median for any purpose. No service vehicle will shall enter the median unless necessary to repair or remove inoperable equipment.

Limitations of Operation. When mowing within ten (10) feet of traveled roadway, all equipment will be operated in the direction of the flow of traffic. This provision does not apply when flaggers and warning signs in accordance with the Manual on Uniform Traffic Control Devices protect the specific work site. When boom-type slope mowers are operated on the shoulder, a flagger will be stationed to warn other traffic and assist the operations. Warning signs will be placed in accordance with the most current edition of the Florida Department of Transportation's "Roadway and Traffic Design Standards" for Design, Construction, Maintained Systems and the "Manual on Uniform Traffic Control Devices for Streets and Highways." When mowers are crossing the traveled roadway or bridges, flaggers will shall be providedprovided by the Contractor. When necessary for mowing machines to cross bridges with full width shoulders on the right, the crossing should be made on the shoulder. All bridges should be crossed with extreme care and operations planned to reduce such crossings to a minimum. When necessary for mowing machines to cross the traveled roadway, a location will be selected that provides an unobstructed sight distance of five hundred (500) feet. The operator will shall stop before crossing the roadway and permit closely approaching vehicles to pass before crossing. Operations will be planned to minimize crossings. Equipment left on the right-of-way or County property after designated work hours will be placed outside the clear and recovery area and will be the sole responsibility of the Contractor. If equipment is left on the right-of-way, it will shall be marked with a barricade etc. and with approved steady burning amber lights. All service and supply operations will shall be conducted outside the clear and recovery area. No supply vehicles will enter the median for any purpose. No service vehicle will enter the median unless necessary to repair or remove inoperable equipment.

Limitations of Operation. When mowing within ten (10) feet of a traveled roadway, all equipment will shall be operated in the direction of the flow of traffic. This provision does not apply when flaggers and warning signs in accordance with the Manual on Uniform Traffic Control Devices protect the specific work site. When boom-type slope mowers are operated on the shoulder, a flagger will flagging operations procedures shall be stationed followed to warn other traffic and assist the operations. Warning signs will be placed in accordance with the most current edition of the Florida Department of Transportation's "Roadway and Traffic Design Standards" for Design, Construction, Maintained Systems and the "Manual on Uniform Traffic Control Devices for Streets and Highways." When mowers are crossing the traveled roadway or bridges, flaggers will be provided. When necessary for mowing machines to cross bridges with full width shoulders on the right, the crossing should be made on the shoulder. All bridges should be crossed with extreme care and operations planned to reduce such crossings to a minimum. When necessary for mowing machines to cross the traveled roadway, a location will be selected that provides an unobstructed sight distance of five hundred (500) feet. The operator will stop before crossing the roadway and permit closely approaching vehicles to pass before crossing. Operations will be planned to minimize crossings. Equipment left on the right-of-way or County property after designated work hours will be placed outside the clear and recovery area and will be the sole responsibility of the Contractor. If equipment is left on the right-of-way, it will be marked with a barricade etc. and with approved steady burning amber lights. All service and supply operations will be conducted outside the clear and recovery area. No supply vehicles will enter the median private property for any purpose. No service vehicle will enter the median private property unless necessary to repair or remove inoperable equipment.