Loading Conditions Demurrage Sample Clauses

Open Split View

Download

Share

Cite

Loading Conditions Demurrage 

Sample 1Sample 2

Save

Copy

Related to Loading Conditions Demurrage

• Vendor’s Conditions The Vendor shall not be obligated to complete the Transaction unless, at or before the Closing Time, each of the conditions listed below in this section has been satisfied, it being understood that the said conditions are included for the exclusive benefit of the Vendor: (a) The representations and warranties of YC in this Agreement shall be true and correct on the Closing Date. (b) YC shall have performed and complied with all of the terms and conditions in this Agreement and the Payment Undertaking on its part to be performed or complied with on or before the Closing Date. (c) As evidence of the satisfaction of the conditions in sections 7.1 (a) and (b), YC shall deliver to the Vendor at the Closing Time a certificate of YC confirming the matters in sections 7.1 (a) and (b) and to the effect that as of the Closing Time all other conditions set forth in this section have been satisfied. The certificate shall be signed by two senior executive officers of YC acceptable to the Vendor, acting reasonably. Notwithstanding the foregoing, the receipt of such certificate and the completion of the Transaction shall not constitute a waiver (in whole or in part) of, or have the effect of modifying or qualifying in any way, any of the representations and warranties of YC made in or pursuant to this Agreement, each of which shall survive the Closing and remain in full force and effect for the benefit of the Vendor as provided in Article 9. (d) YC and the Buyer shall have delivered to the Vendor a legal opinion from counsel acceptable to the Vendor, acting reasonably, and in form and content satisfactory to the Vendor subject to reasonable qualifications, as to the due incorporation and organization of YC and the Buyer, the corporate power and authority of YC and the Buyer, the receipt of all necessary approvals by YC and the Buyer and the enforceability of this Agreement, the Payment Undertaking and the Covenant Escrow Agreement as against YC and the Buyer and the non-conflict of this Agreement, the Payment Undertaking and the Covenant Escrow Agreement with respect to the constating documents of YC and the Buyer and any Applicable Laws. (e) The Vendor Regulatory Approval shall have been granted, obtained and received unconditionally or on terms satisfactory to the Vendor, acting reasonably. (f) No Order shall have been made and no Legal Proceeding shall have been commenced or shall be pending or threatened against the other Party or its affiliates or which enjoins, restricts or prohibits, or which asserts a claim or seeks a remedy that would have the effect of enjoining, restricting or prohibiting the completion of the Transaction. If any condition in this section has not been fulfilled on or before the Closing Date or if any such condition is or becomes impossible to satisfy, other than as a result of the failure of the Vendor to comply with its obligations under this Agreement, then the Vendor in its sole discretion may, without limiting any rights or remedies available to the Vendor at law or in equity, either terminate this Agreement by written notice to YC, in which case the provisions of sections 2.5(c)(iii), (iv) or (v) shall be applicable, or waive compliance with any such condition without prejudice to its right of termination in the event of non-fulfilment of any other condition.

• ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:

• GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.

• Hazardous Conditions Whenever the Contractor’s operations create a condition hazardous to traffic or to the public, the Contractor shall provide flagmen and furnish, erect and maintain control devices as are necessary to prevent accidents or damage or injury to the public at Contractor’s expense and without cost to the County. The Contractor shall comply with County directives regarding potential hazards. Emergency lights and traffic cones must also be readily available at all times and must be used in any hazardous condition. Emergency traffic cones must be placed in front of and behind vehicles to warn oncoming traffic. Signs, lights, flags, and other warning and safety devices shall conform to the requirements set forth in Chapter 5 of the current traffic manual, Traffic Control for Construction and Maintenance Work Zones, published by the state of California Department of Transportation. The Contractor shall take proper safety and health precautions to protect the Work, the workers, the public, and the property of others. The Contractor shall also be responsible for all materials delivered and Work performed until completion and acceptance of the entire construction Work, except for any completed unit of construction thereof which theretofore may have been accepted.

• WORKING CONDITIONS 9.01 Lunch periods shall be at mid-shift. 9.02 The Employer shall allow each employee two (2) breaks of ten (10) minutes each, but not more in a work shift. Time of breaks shall be mutually agreed upon. 9.03 Essential protective clothing including welder’s gloves, protective vests or leather jackets, noise abatement devices, and rainwear shall be supplied at no charge to the employee. In the event that an employee does not return the foregoing items supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any money owing to the employee. 9.04 Chemical or flush toilets shall be provided from the commencement of work on all jobs. Where the sewer or chemical toilets are not available, sanitary toilet facilities shall be provided as called for in local sanitary regulations. Toilet houses shall be painted, at least on the inside, and cleaned out daily. Toilet paper will be provided. 9.05 Where there is no running tap water available, drinking water in approved sanitary containers shall be provided. Paper cups will be supplied. Salt tablets shall be supplied during the summer months. 9.06 If requested by the Union or employee, the Employer will provide within three (3) calendar days, a termination slip which shall state the reason for the employee’s termination and whether or not he is eligible for rehire. 9.07 Adequate time will be allowed prior to quitting time for picking up tools. 9.08 A lock-up shall be provided for employees for drying clothes, and dressing room, as well as lunch room. The lock-up shall have tables, and benches with provision for drying clothes. Such lock-up shall have windows and venting with adequate lighting and provision for continuous heat twenty-four (24) hours a day. The Employer shall be responsible for having the lock-up cleaned out daily and kept cleared of building material and other construction paraphernalia. Additional shelters shall be provided for employees to eat their lunch as may be required. 9.09 In case of fire or burglary on property or premises provided by the Employer, the Employer shall protect the value of an employee’s work clothes up to a total of three hundred and fifty dollars ($350.00). The Employer shall also provide fire and burglary insurance for the employees required tools to a total value of the tools, tool for tool, make for make, provided an inventory of tools and clothing is filed with the Employer. The Employer shall supply the required forms and obtain the inventory from each employee. The employee shall receive a signed copy of the inventory from the Employer. Coverage will commence at the date of the filing of the inventory with the Employer. Where an employee fails to file an inventory his rights to submit a claim shall be waived. (a) All mechanics, welders, servicemen, tire servicemen, drill doctors, steel sharpeners, bodymen painters, and mechanics and welder apprentices who request coveralls shall have these supplied and cleaned by the Employer. There shall be one change a week available in the employee’s proper size. Employees are expected to take reasonable care of coveralls supplied. In the event that an employee does not return the coveralls supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any monies owing to the employee. When requested, coveralls shall be supplied on a temporary basis to employees who assist on work as described above, or where the Employer and the Union mutually agree that coveralls are required. (b) Employees entitled to receive coveralls as provided herein may obtain an additional change of coveralls in any one week providing the condition of the coveralls requires a change. The shop xxxxxxx shall use discretion in authorizing the additional change. (c) All shops shall provide adequate clean-up facilities. 9.11 The Employer shall pay the cost of obtaining operators’ licences other than those required under the Motor Vehicles Act for employees covered by this Agreement. 9.12 No employee will be permitted to use his own motor vehicle in a manner which is unfair to other members or against the best interest of the Union. 9.13 Each employee being terminated will be given one (1) hour’s notice of termination by the Employer or one (1) hour’s pay allowed in lieu thereof. Heavy duty mechanics and apprentice mechanics may utilize this hour to gather together their tools and put them in shape for their next job. 9.14 When a mechanic leaves the employ of the Employer, the Employer shall be required to pay cost of shipping mechanic’s tools. Tools shall be shipped within forty-eight (48) hours of his leaving his employment, subject to the same conditions as govern transportation. When an Operating Engineer elects to transport his own tools to and from the jobsite, the employee shall be paid the rate of two dollars and seventy-five cents ($2.75) per one hundred (100) pounds per one hundred (100) miles. (e.g. $2.75 x 528 pounds x 273 miles = $39.64). Where the Employer fails to comply with the above, the employee shall be deemed to be still on the payroll of the Employer and shall receive his usual wages and all other conditions of this Agreement until there is compliance with these provisions. 9.15 Where an employee is involved in an accident while on the job and as a result is unable to perform his work, he shall receive a full day’s pay for the day of the accident.

• SAFETY CONDITIONS 8.1 The District shall make every effort to provide a place of employment which is safe. A unit member shall not be required to perform duties under conditions which endanger his/her health or safety. 8.2 The District shall make a good faith effort to reduce or alleviate those conditions which cause stress. The reduction of threats or intimidation by students or other members of the public shall be a continuous effort of both the District and unit members working together. 8.3 Unit members who feel they are being required to work under unsafe or unsanitary conditions, or to perform tasks that endanger their health or safety, shall submit written recommendations for changes to the principal or site administrator. The principal or site administrator shall respond and take corrective action as needed. 8.4 The District shall ensure that each unit member has access to a lockable desk, cupboard or other lockable space. 8.5 Unit members other than the school nurse, shall not be required to provide specialized physical health care. 8.6 Unit members are authorized to administer discipline to students in accordance with the Education Code and the rules and regulations of the District. A written description of the rights and duties of unit members with respect to student discipline shall be provided to unit members at the beginning of each school year. In addition, said written descriptions shall be available at each school site. The District shall not take action against a unit member who uses reasonable and lawful force in the performance of his/her duties. Unit members shall report any physical assault against the unit member to the principal or site administrator, who shall report the incident to the appropriate law enforcement agency. 8.7 During conditions of excessive heat, the Superintendent or designee, whenever appropriate, will reduce the school day for students in schools with non-operable air conditioning, to the State required minimum day. Unit members may be directed to proceed to a district air conditioned location for the remainder of the service day. The Superintendent or designee shall have the discretion to reduce the school day to the State required minimum day whenever other weather conditions pose a danger to students and unit members. Unit members may be directed to proceed to another District location for the remainder of the service day. 8.8 For protection of unit members whose normal duties may require transportation of students in unit member's vehicles, the District shall provide secondary insurance against personal liability for damages for death, injury to a person, or damage or loss of property caused by the negligent act or omission of the unit member when acting within the scope of his/her employment. Additionally, the District will provide this same coverage to unit members who are required to travel from site-to- site or make home visitations in order to perform assigned duties. When a loss occurs, the unit member's primary insurance deductible will be reimbursed up to a maximum of $500.00. If administrator approval is unobtainable, the teacher's best judgment for the protection of student safety shall be included in the above. 8.9 Restrooms shall be available to unit members whenever they are required to render service. 8.10 Adequate lounge facilities shall be provided for unit members' use. Additionally, the District shall provide, when fiscally possible, at least one piece of furniture per site where a staff member may recline. The site safety committee shall determine the placement of these facilities and furniture. 8.11 Unit members shall have the right to refer to the office, a student who exhibits symptoms of illness which endanger the health of other students or the unit member. The student shall not return to the classroom until it is determined by the principal/site administrator that his/her health is not a clear and present danger to those with whom he/she shares space. The student shall be given a pass to return to class signed by the principal/site administrator confirming the decision. 8.12 The District shall reimburse or repair articles of clothing, glasses and hearing aids damaged while the unit member is acting in the proper discharge of disciplinary/ supervisorial duties. In addition, all other accessories damaged under the conditions listed above shall be reimbursed up to a maximum of $200.00.

• Outage Repair Standard In the event of an outage or trouble in any Service being provided by a Party hereunder, the Providing Party will follow Verizon’s standard procedures for isolating and clearing the outage or trouble.

• Concealed or Unknown Conditions If the Contractor encounters conditions at the site that are (1) subsurface or otherwise concealed physical conditions that differ materially from those indicated in the Contract Documents or (2) unknown physical conditions of an unusual nature, that differ materially from those ordinarily found to exist and generally recognized as inherent in construction activities of the character provided for in the Contract Documents, the Contractor shall promptly provide notice to the Owner and the Architect before conditions are disturbed and in no event later than twenty-one (21) calendar days after first observance of the conditions. The Owner will promptly investigate such conditions and, if the Owner determines that they differ materially and cause an increase or decrease in the Contractor’s cost of, or time required for, performance of any part of the Work, will authorize an equitable adjustment in the Contract Sum or Contract Time, or both. If the Owner determines that the conditions at the site are not materially different from those indicated in the Contract Documents and that no change in the terms of the Contract is justified, the Owner shall promptly notify the Contractor in writing, stating the reasons. If the Contractor disputes the Owner’s determination, the Contractor party may assert a Claim as provided in Article 15.

• Delivery Conditions (a) The Delivery Conditions are as follows: (i) At Seller’s expense, Seller shall have secured all Governmental and grid operations approvals as are necessary for the safe and lawful operation and maintenance of the Project and to enable Seller to deliver Distribution Services at the Initial Contract Capacity to Buyer. (ii) Seller shall have posted collateral as required by Section 10.4(a)(ii). (iii) Seller shall have submitted for Buyer’s review a Project Safety Plan incorporating the elements described in Appendix XII, which must demonstrate Seller’s ability to comply with the Safety Requirements on the IDD and for the Delivery Term. (iv) Seller shall have delivered to Buyer the Safety Attestation in accordance with Section 2(a) of Appendix XIV. (v) As of the IDD, no Seller’s Event of Default shall have occurred and remain uncured. (vi) At Seller’s expense, Seller or Contractor shall have constructed or caused to be constructed the Project as of the IDD and submitted the Certification for Commercial Operation in Appendix VII-A to enable (A) Seller to satisfy the obligations of the Seller herein and (B) the Project to deliver Distribution Services at the Contract Capacity to Buyer. (vii) At Seller’s expense, Seller shall have installed any necessary metering to deliver the applicable Distribution Services in accordance with Section 4.1 and any applicable tariffs of the Utility Distribution Company. (viii) Seller shall have met each Critical Milestone set forth in Appendix VI pursuant to Section 2.3.

• Service Conditions Customer acknowledges that in the event of a service issue, Customer is responsible for on-site cooperative testing with LightEdge Technical Support to assist in the diagnosis of the trouble. Customer agrees to be bound to current terms of LightEdge Acceptable Use Policy. Terms of the Acceptable Use Policy are subject to change without notice. Current Acceptable Use Policy can be found here: xxxx://xxx.xxxxxxxxx.xxx/legal Customer agrees that any service complaints including concerns regarding level of support, products, service reliability, or any other concerns related to LightEdge or Services being provided by LIghtEdge will be communicated to LightEdge by sending an email to xx@xxxxxxxxx.xxx.