Long-Term Supply Agreements Sample Clauses

Long-Term Supply Agreements. Become subject to, or permit any of its Subsidiaries to become subject to (including, without limitation, by way of renewal of, amendment to or modification of) any agreement relating to the purchase of any supplies or materials by the Company or Subsidiary, as the case may be, and having a term greater than one year;
AutoNDA by SimpleDocs
Long-Term Supply Agreements a) Within twelve (12) months of Closing the parties shall, in good faith, negotiate long-term supply agreements for the most significant Lamp Materials to be supplied by OSRAM Group to EDIL Group, and by EDIL Group to OSRAM Group hereunder which agreements shall unless otherwise agreed incorporate the terms and conditions set out in Section 2.3 and provide for a commitment to purchase on the part of the purchaser (including minimum quantities where appropriate) and fixed prices for such Lamp Materials calculated in accordance with Section 2.3 c). b) In the event that the parties agree and sign a long-term supply agreement for a Lamp Material(s), the terms on which such Lamp Material(s) shall be supplied thereafter will be as set out in such long-term supply agreement and, for the avoidance of doubt, the terms of this Framework Agreement shall thenceforth not apply to the supply of such Lamp Materials. c) Notwithstanding the above, the parties shall be committed to supply or procure the supply of Lamp Materials to the other party and its Subsidiaries pursuant to its commitment in Section 2.3 a) unless and until the parties agree that such commitment is replaced in respect of certain Lamp Materials by a long term supply agreement.
Long-Term Supply Agreements. The xxxx-ups above cost for products covered under long term supply agreements products shall be included as an adjustment in the economic benefit calculation.

Related to Long-Term Supply Agreements

  • Supply Agreements For a period of three years from the consummation of the IPO, Odetics shall not unilaterally terminate or assign its guarantee obligation with respect to any supply agreement pursuant to which it has guaranteed the performance by ATL of ATL's obligations, unless such suppliers have consented to the termination or assignment of such guarantee.

  • Employees on Long Term Supply Assignments Employees completing long term supply assignments may only access sick leave and short term disability leave in the fiscal year in which the allocation was provided. Any remaining allocation may be used in subsequent long term supply assignments, provided these occur within the same fiscal year. Employees employed in a Long Term Supply Assignment which is less than the ordinary period of employment for the position shall have their sick leave and short term disability allocations pro-rated accordingly. Where the length of the long term supply assignment is not known in advance, a projected length must be determined at the start of the assignment in order for the appropriate allocation of sick leave/short term disability leave to occur. If a change is made to the length of the assignment, an adjustment will be made to the allocation and applied retroactively.

  • Supply Agreement Seller and Buyer, or their Affiliates, shall have executed the Supply Agreement.

  • Acquisition Agreements If the Equipment is subject to any Acquisition Agreement, Lessee, as part of this lease, transfers and assigns to Lessor all of its rights, but none of its obligations (except for Lessee's obligation to pay for the Equipment conditioned upon Lessee's acceptance in accordance with Paragraph 6), in and to the Acquisition Agreement, including but not limited to the right to take title to the Equipment. Lessee shall indemnify and hold Lessor harmless in accordance with Paragraph 19 from any liability resulting from any Acquisition Agreement as well as liabilities resulting from any Acquisition Agreement Lessor is required to enter into on behalf of Lessee or with Lessee for purposes of this lease.

  • TIPS Sales and Supplemental Agreements If awarded, when making a sale under this awarded contract, the terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, defects, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, AIA Contract, Invoice, etc.) (“Supplemental Agreement” as used herein) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement. The Supplemental Agreement shall dictate the scope of services, the project delivery expectations, the scheduling of projects and milestones, the support requirements, and all other terms applicable to the specific sale(s) between the Vendor and the TIPS Member.

  • License Agreements (a) Each Borrower and Guarantor shall (i) promptly and faithfully observe and perform all of the material terms, covenants, conditions and provisions of the material License Agreements to which it is a party to be observed and performed by it, at the times set forth therein, if any, (ii) not do, permit, suffer or refrain from doing anything that could reasonably be expected to result in a default under or breach of any of the terms of any material License Agreement, (iii) not cancel, surrender, modify, amend, waive or release any material License Agreement in any material respect or any term, provision or right of the licensee thereunder in any material respect, or consent to or permit to occur any of the foregoing; except, that, subject to Section 9.19(b) below, such Borrower or Guarantor may cancel, surrender or release any material License Agreement in the ordinary course of the business of such Borrower or Guarantor; provided, that, such Borrower or Guarantor (as the case may be) shall give Agent not less than thirty (30) days prior written notice of its intention to so cancel, surrender and release any such material License Agreement, (iv) give Agent prompt written notice of any material License Agreement entered into by such Borrower or Guarantor after the date hereof, together with a true, correct and complete copy thereof and such other information with respect thereto as Agent may request, (v) give Agent prompt written notice of any material breach of any obligation, or any default, by any party under any material License Agreement, and deliver to Agent (promptly upon the receipt thereof by such Borrower or Guarantor in the case of a notice to such Borrower or Guarantor and concurrently with the sending thereof in the case of a notice from such Borrower or Guarantor) a copy of each notice of default and every other notice and other communication received or delivered by such Borrower or Guarantor in connection with any material License Agreement which relates to the right of such Borrower or Guarantor to continue to use the property subject to such License Agreement, and (vi) furnish to Agent, promptly upon the request of Agent, such information and evidence as Agent may reasonably require from time to time concerning the observance, performance and compliance by such Borrower or Guarantor or the other party or parties thereto with the material terms, covenants or provisions of any material License Agreement. (b) Each Borrower and Guarantor will either exercise any option to renew or extend the term of each material License Agreement to which it is a party in such manner as will cause the term of such material License Agreement to be effectively renewed or extended for the period provided by such option and give prompt written notice thereof to Agent or give Agent prior written notice that such Borrower or Guarantor does not intend to renew or extend the term of any such material License Agreement or that the term thereof shall otherwise be expiring, not less than sixty (60) days prior to the date of any such non-renewal or expiration. In the event of the failure of such Borrower or Guarantor to extend or renew any material License Agreement to which it is a party, Agent shall have, and is hereby granted, the irrevocable right and authority, at its option, to renew or extend the term of such material License Agreement, whether in its own name and behalf, or in the name and behalf of a designee or nominee of Agent or in the name and behalf of such Borrower or Guarantor, as Agent shall determine at any time that an Event of Default shall exist or have occurred and be continuing. Agent may, but shall not be required to, perform any or all of such obligations of such Borrower or Guarantor under any of the License Agreements, including, but not limited to, the payment of any or all sums due from such Borrower or Guarantor thereunder. Any sums so paid by Agent shall constitute part of the Obligations. (c) No Borrower or Guarantor shall assign, sell, mortgage, lease, transfer, pledge, hypothecate, grant a security interest in or lien upon, encumber, grant an exclusive or non-exclusive license relating to any Intellectual Property, or otherwise dispose of any Intellectual Property, in each case without the prior written consent of Agent, except that any Borrower or Guarantor may, after written notice to Agent, grant a non-exclusive license relating to any Intellectual Property to another Borrower or Guarantor in the ordinary course of business.

  • Services Agreement “Services Agreement” shall mean any present or future agreements, either written or oral, between Covered Entity and Business Associate under which Business Associate provides services to Covered Entity which involve the use or disclosure of Protected Health Information. The Services Agreement is amended by and incorporates the terms of this BA Agreement.

  • Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Generator Deactivation Solution, the ISO shall tender to the Developer that proposed the selected transmission Generator Deactivation Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its reliability planning process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Generator Deactivation Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Generator Deactivation Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.

  • Indemnity for Underlying Sales and Supplemental Agreements Vendor shall be solely responsible for any customer claims or any disputes arising out of TIPS Sales or any Supplemental Agreement as if sold in the open-market. The Parties agree that TIPS shall not be liable for any claims arising out of Vendor’s TIPS Sales or Supplemental Agreements, including but not limited to: allegations of product defect or insufficiency, allegations of service defect or insufficiency, allegations regarding delivery defect or insufficiency, allegations of fraud or misrepresentation, allegations regarding pricing or amounts owed for TIPS sales, and/or allegations regarding payment, over-payment, under-payment, or non-payment for TIPS Sales. Payment/Drafting, overpayment/over-drafting, under- payment/under-drafting, or non-payment for TIPS Sales between customer and Vendor and inspections, rejections, or acceptance of such purchases shall be the exclusive respective obligations of Vendor/Customer, and disputes shall be handled in accordance with the terms of the underlying Supplemental Agreement(s) entered into between Vendor and Customer. Vendor acknowledges that TIPS is not a dealer, subcontractor, agent, or reseller of Vendor’s goods and services and shall not be responsible for any claims arising out of alleged insufficiencies or defects in Vendor’s goods and services, should any arise.

  • Sales and Supplemental Agreements The terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, Invoice, etc.) (hereinafter “Supplemental Agreement”) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!