Lube and Control Oil Systems Sample Clauses

Lube and Control Oil Systems. The facility shall include a complete lubrication system including storage, pumps, filters, pressure regulation, cooling‑heating, circulating pipe to the turbine, and instrumentation and controls and include the following features:. The oil reservoir will be sized in accordance with industry standards to provide a normal operating volume of at least 5 times the flow per minute to the bearings and other services. Electrical immersion heaters with thermostatic control shall be furnished and shall be capable of maintaining the optimal oil temperature at minimum specified winter design ambient temperature conditions. Lube oil supply and drain piping, valves, and fittings may be stainless or carbon steel. Lube oil supply piping shall be routed inside the drain line. Two lube oil pumps with AC motor drives. As an alternate, one full capacity shaft driven lube oil pump and one full capacity AC motor-driven lube oil pump shall be provided. With either alternative, one partial capacity DC motor driven lube oil pump sized to provide adequate flow during trip conditions shall be provided. Two 100% capacity water‑cooled lube oil coolers shall be provided and piped such that one unit may be serviced while the other unit is in operation. A duplex, 100% capacity multi‑element lube oil filter with a continuous flow transfer valve shall be provided with connections and piping for a portable centrifuge filter. Equipment shall include two 100% oil vapor extractors with mist eliminators which meet permit emission limits. Extractors shall purge bearing housings and reservoir of oil vapors. Coalescent type mist eliminators shall be provided. Oil shall be separated and returned to the lube oil reservoir. Additional instrumentation shall include dual‑element thermocouples for monitoring and alarm to measure steam turbine and generator bearing metal temperatures. Bearing header and vapor extraction vacuum pressures shall be measured and indicated locally and on the unit control system. Lube oil pressure to each bearing or in the common lube oil supply line shall be indicated in the unit's control system. A lube oil conditioner shall be provided to remove particulate and free and emulsified water content in accordance with manufacturer’s specifications. Valved connections shall be provided to provide for installation of portable centrifuge. Hydraulic fluid control system shall be designed to use fire resistant fluid. It shall be provided with the following: A reservoir with access ...
Sample 1
AutoNDA by SimpleDocs

Related to Lube and Control Oil Systems

  • Unbundled Loop Concentration (ULC) System 2.5.1 BellSouth will provide to <<customer_name>> Unbundled Loop Concentration (ULC). Loop concentration systems in the central office concentrate the signals transmitted over local loops onto a digital loop carrier system. The concentration device is placed inside a BellSouth central office. BellSouth will offer ULC with a TR008 interface or a TR303 interface.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • SERVICE MONITORING, ANALYSES AND ORACLE SOFTWARE 11.1 We continuously monitor the Services to facilitate Oracle’s operation of the Services; to help resolve Your service requests; to detect and address threats to the functionality, security, integrity, and availability of the Services as well as any content, data, or applications in the Services; and to detect and address illegal acts or violations of the Acceptable Use Policy. Oracle monitoring tools do not collect or store any of Your Content residing in the Services, except as needed for such purposes. Oracle does not monitor, and does not address issues with, non-Oracle software provided by You or any of Your Users that is stored in, or run on or through, the Services. Information collected by Oracle monitoring tools (excluding Your Content) may also be used to assist in managing Oracle’s product and service portfolio, to help Oracle address deficiencies in its product and service offerings, and for license management purposes.

  • Unbundled Sub-Loop Concentration System (USLC 2.9.1 Where facilities permit and where necessary to comply with an effective Commission order, BellSouth will provide <<customer_name>> with the ability to concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. The DS1s will then be terminated into <<customer_name>>’s collocation space. TR-008 and TR303 interface standards are available.

  • Trunk Group Architecture and Traffic Routing The Parties shall jointly engineer and configure Local/IntraLATA Trunks over the physical Interconnection arrangements as follows:

  • Information regarding Interconnection Facilities 4.2.1 The SPD shall be required to obtain all information from the STU/CTU/concerned authority with regard to the Interconnection Facilities as is reasonably necessary to enable it to design, install and operate all interconnection plant and apparatus on the SPD’s side of the Delivery Point to enable delivery of electricity at the Delivery Point. The transmission of power up to the point of interconnection where the metering is done for energy accounting shall be the responsibility of the SPD at his own cost.

  • Commingling of Resold Services with Unbundled Network Elements and Combinations of Unbundled Network Elements 6.7.1 To the extent it is Technically Feasible and pursuant to the terms of Section 9.1, CLEC may Commingle Telecommunications Services purchased on a resale basis with an Unbundled Network Element or combination of Unbundled Network Elements.

  • Monitoring Equipment 2.2.1 24-hour TSP air quality monitoring was performed using High Volume Sampler (HVS) located at each designated monitoring station. The HVS meets all the requirements of the Project Specific EM&A Manual. Portable direct reading dust meters were used to carry out the 1-hour TSP monitoring. Brand and model of the equipment is given in Table 2.1.

  • TOOL STORAGE 1. A company shall provide on all construction jobs in towns and cities, and elsewhere where reasonably necessary and practicable (or if requested buy the employee), a suitable and secure waterproof lock-up solely for the purpose of storing employees’ tools, and on multi-storey and major projects the company shall provide, where possible, a suitable lock-up for employees’ tools within a reasonable distance of the work area of large groups of employees.

  • Infrastructure (a) The Borrower has and will maintain a sufficient infrastructure to conduct its business as presently conducted and as contemplated to be conducted following its execution of this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.