Manufacture by Shire; Commercial Supply by Shire Sample Clauses

Manufacture by Shire; Commercial Supply by Shire. Shire will have the right to act as, or to appoint a Third Party to act as, a second source for Collaboration Products under terms and conditions to be established by the Parties and subject to reasonable commercial qualification by New River and applicable regulatory requirements. In connection with such right, and based on the specifications provided by New River under Section 6.2, Shire will prepare all specifications required for any facility at which Shire intends to Manufacture, or have Manufactured, Collaboration Products, including cGMP qualification guidelines, and any QA approved procedures to be followed during the qualification of such facility, all consistent with the specifications and procedures approved in any existing Regulatory Approval, in each case at Shire’s sole expense. Following validation of such facility, the JSC will task Shire with the production of quantities of Collaboration Products at least sufficient for Shire to maintain such validation as a second source and such quantities shall be available for distribution by Shire. For purposes of determining the Allowable Expenses for sales of Collaboration Products to Third Parties, the [*] on such sales shall be equal to [*] for the quantity of such Collaboration Products actually sold, as determined in accordance with Exhibit A. In the event that [*] any agreement with a Third Party Manufacturer for the Manufacture of Compound or otherwise [*] such that there is a reasonable likelihood of insufficient quantities of Compound to satisfy the need thereof for the Manufacture of Collaboration Products, then Shire shall be entitled, but not be required, to assume in whole or in part New River’s rights and related obligations under such agreement (to the extent permissible thereunder) or otherwise direct the exercise of rights and performance of obligations by New River under such agreement, including the establishment of additional Third Party Manufacturers or Manufacture by Shire, in each case upon the mutual agreement of the Parties, such agreement not to be unreasonably withheld, delayed or conditioned. In such event the Parties shall meet and confer to devise the most effective supply plan for the bulk Compound and/or Collaboration Products and to consider amendments to this or other agreements, as necessary.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs

Related to Manufacture by Shire; Commercial Supply by Shire

  • Commercial Supply Celgene shall Manufacture and supply all Commercial Supplies.

  • Clinical Supply Takeda will provide to Licensee[***] the amount of TAK-385 Licensed Compound or TAK-385 Licensed Products needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan (estimated by Licensee as of the Effective Date to be [***]), solely to the extent that Takeda can supply such TAK-385 [***] = Portions of this exhibit have been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment requested under 17 C.F.R. Sections 200.80(b)(4) and 230.406. Licensed Compound or TAK-385 Licensed Products (a) from its supply of TAK-385 Licensed Compound or TAK-385 Licensed Products in existence as of the Effective Date and which supply can be used for its intended purposes without further re-processing (the “Initial Clinical Supply”) and (b) after retaining the amount needed by Takeda for Clinical Trials in the Takeda Territory. Takeda will also provide to Licensee, at [***] any additional supplies of TAK-385 Licensed Compound or TAK-385 Licensed Products in excess of the Initial Clinical Supply needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan. Within [***] days after the Effective Date, the Parties will enter into a manufacturing and supply agreement (the “Takeda Clinical Manufacturing and Supply Agreement”), which will govern the terms and conditions of the Manufacturing and supply of the TAK-385 Licensed Compound and TAK-385 Licensed Products (including the Initial Clinical Supply) by Takeda to Licensee for Development purposes, including the exact quantities and the timelines for delivery. The Parties will negotiate the terms and conditions of such Takeda Clinical Manufacturing and Supply Agreement in good faith for a period of [***] days (as may be extended upon agreement of the Parties). As part of the negotiation related to the Takeda Clinical Manufacturing and Supply Agreement, the Parties shall discuss in good faith the ability of Takeda to supply to Licensee [***]. If the Parties have not entered into a definitive agreement within such negotiation period, then the final terms and conditions of such agreement will be resolved in accordance with Section 8.2 (Arbitration for Failure to Agree).

  • Development of Products (a) During the term of this Agreement, ViewRay may from time to time seek services from PEKO with respect to the development of certain Products that can be incorporated into the ViewRay Renaissance™ MRI-guided radiation therapy system. For each Program to be undertaken by PEKO pursuant to this Agreement, the parties will prepare a “Work Statement” and agree to said “Work Statement” in substantially the form attached as Attachment 1. Each Work Statement will describe: (i) the (i) services that PEKO will be responsible for providing to ViewRay and the deliverables that PEKO will be responsible for delivering to ViewRay (“Deliverable(s)”), (ii) delivery schedule for the Deliverables, (iii) pricing terms, (iv) work plan for the Program, and (v) ViewRay’s responsibilities in connection with the Program. Each Work Statement will be prepared based upon the requirements and information provided to PEKO by ViewRay. A separate Work Statement will be required for each Program; and each Work Statement will become subject to this Agreement only when mutually agreed and signed by ViewRay and PEKO.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Manufacturing and Supply Genentech shall be responsible for manufacturing and supplying Licensed Products for clinical use and commercial sale in the Genentech Field.

  • Manufacture (a) Manufacturer shall only manufacture the specific number of Products as requested by Company and at no time shall manufacture excess goods or overruns. Manufacturer shall not sell any Products bearing the Trademarks to any third parties without the express written consent of Company.

  • Manufacturing Intrexon shall have the option and, in the event it so elects, shall use Diligent Efforts, to perform any manufacturing activities in connection with the Aquaculture Program that relate to the Intrexon Materials, including through the use of a suitable Third Party contract manufacturer. To the extent that Intrexon so elects, Intrexon may request that AquaBounty and Intrexon establish and execute a separate manufacturing and supply agreement, which agreement will establish and govern the production, quality assurance, and regulatory activities associated with manufacture of Intrexon Materials. Except as provided in Section 4.1, any manufacturing undertaken by Intrexon pursuant to the preceding sentence shall be performed in exchange for cash payments equal to Intrexon’s Fully Loaded Cost in connection with such manufacturing, on terms to be negotiated by the Parties in good faith. In the event that Intrexon does not manufacture Intrexon Materials or bulk quantities of other components of AquaBounty Products, then Intrexon shall provide to AquaBounty or a contract manufacturer selected by AquaBounty and approved by Intrexon (such approval not to be unreasonably withheld) all Information Controlled by Intrexon that is (a) related to the manufacturing of such Intrexon Materials or bulk qualities of other components of AquaBounty Products for use in the Field and (b) reasonably necessary to enable AquaBounty or such contract manufacturer (as appropriate) for the sole purpose of manufacturing such Intrexon Materials or bulk quantities of other components of AquaBounty Products. The costs and expenses incurred by Intrexon in carrying out such transfer shall be borne by Intrexon. Any manufacturing Information transferred hereunder to AquaBounty or its contract manufacturer shall not be further transferred to any Third Party, including any Product Sublicensee, or any AquaBounty Affiliate without the prior written consent of Intrexon; provided, however, that Intrexon shall not unreasonably withhold such consent if necessary to permit AquaBounty to switch manufacturers.

  • Supply Agreement Buyer shall have executed and delivered the Supply Agreement to the Company.

  • Manufacturing Agreement Each of the Sellers (as applicable) shall have executed and delivered to the Buyer the Manufacturing Agreement with respect to the portion of the Business conducted at the applicable Facility.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!