Manufactured Material Sample Clauses

Manufactured Material. The manufacturing process must provide for the continuous monitoring of thickness and sheet quality. Details of testing methods shall be provided with each roll delivered to the site and shall include the following information and test results: • Thickness (ASTM D 1593) • Tensile Properties (ASTM D 638) • Tensile Strength at Yield and Break • Elongation at Yield and Break • Tear Resistance (ASTM D 1004, Die C) • Puncture Resistance (FTMS 101C 2031/FTMS 101C 2065) • Carbon Black Content (ASTM D 1603) • Density (ASTM 1505) • Melt Index (ASTM D 1238) • Brittleness (ASTM D 746) The Superintendent and the Contractor shall jointly inspect any material rejected on site by the Superintendent. If required, the material shall be tested at the Contractors expense. If the material fails to meet the Specification, the Contractor at his cost shall replace it.
AutoNDA by SimpleDocs

Related to Manufactured Material

  • Stored Materials The Department shall not be required to pay for materials stored at the site or stored at other locations absent prior written authorization to do so, which authorization may be withheld at the Department's sole discretion. If the Department expressly agrees to pay for materials stored at the site but not yet incorporated into the Work, the Application for Payment may also include a request for payment of the cost of such materials, if the materials have been delivered to the site, and suitably stored. Such requests shall be documented by appropriate invoices and bills of sale. Payment for stored materials shall be conditioned also on the Design-Builder’s representation that it has inspected the material and found it to be free from defect and otherwise in conformity with this Agreement, and on satisfactory evidence that the materials are insured under the builder’s risk policy. Further, if the Design-Builder requests the Department to allow payments for storage of materials offsite, the Design-Builder shall be required, inter alia, to agree to execution of proper documentation to afford the Department a secured interest in the materials upon payment.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Manufacturer A firm that operates or maintains a factory or establishment that produces on the premises, the materials or supplies obtained by the Contractor. Regular Dealer - A firm that owns, operates, or maintains a store, warehouse, or other establishment in which the materials or supplies required for the performance of the contract are bought, kept in stock, and regularly sold to the public in the usual course of business. A regular dealer engages in, as its principal business and in its own name, the purchase and sale or lease of the products in question. A regular dealer in such bulk items as steel, cement, gravel, stone, and petroleum products need not keep such products in stock, if it owns and operates distribution equipment for the products. Brokers and packagers are not regarded as manufacturers or regular dealers within the meaning of this section. United States Department of Transportation (USDOT) - Federal agency responsible for issuing regulations (49 CFR Part 26) and official guidance for the DBE program.

  • Licensed Materials The materials that are the subject of this Agreement are set forth in Appendix A ("Licensed Materials").

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Software Products Save as otherwise set forth in the Agreement, the right to use any Software Product is personal to the Licensee, for its own internal use, and is non-transferable, except with the Licensor’s prior written consent, in which case the Licensee shall cause the assignee or sub-licensee to agree to the terms of this Software License.

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • SALES MATERIALS 4.1 LIFE COMPANY will furnish, or will cause to be furnished, to TRUST and ADVISER, each piece of sales literature or other promotional material in which TRUST or ADVISER is named, at least ten (10) Business Days prior to its intended use. No such material will be used if TRUST or ADVISER objects to its use in writing within seven (7) Business Days after receipt of such material. 4.2 TRUST and ADVISER will furnish, or will cause to be furnished, to LIFE COMPANY, each piece of sales literature or other promotional material in which LIFE COMPANY or its Separate Accounts are named, at least ten (10) Business Days prior to its intended use. No such material will be used if LIFE COMPANY objects to its use in writing within seven (7) Business Days after receipt of such material. 4.3 TRUST and its affiliates and agents shall not give any information or make any representations on behalf of LIFE COMPANY or concerning LIFE COMPANY, the Separate Accounts, or the Variable Contracts issued by LIFE COMPANY, other than the information or representations contained in a registration statement or prospectus for such Variable Contracts, as such registration statement and prospectus may be amended or supplemented from time to time, or in reports of the Separate Accounts or reports prepared for distribution to owners of such Variable Contracts, or in sales literature or other promotional material approved by LIFE COMPANY or its designee, except with the written permission of LIFE COMPANY. 4.4 LIFE COMPANY and its affiliates and agents shall not give any information or make any representations on behalf of TRUST or concerning TRUST other than the information or representations contained in a registration statement or prospectus for TRUST, as such registration statement and prospectus may be amended or supplemented from time to time, or in sales literature or other promotional material approved by TRUST or its designee, except with the written permission of TRUST or ADVISER. 4.5 For purposes of this Agreement, the phrase "sales literature or other promotional material" or words of similar import include, without limitation, advertisements (such as material published, or designed for use, in a newspaper, magazine or other periodical, radio, television, telephone or tape recording, videotape display, signs or billboards, motion pictures or other public media), sales literature (such as any written communication distributed or made generally available to customers or the public, including brochures, circulars, research reports, market letters, form letters, seminar texts, or reprints or excerpts of any other advertisement, sales literature, or published article), educational or training materials or other communications distributed or made generally available to some or all agents or employees, registration statements, prospectuses, statements of additional information, shareholder reports and proxy materials, and any other material constituting sales literature or advertising under National Association of Securities Dealers, Inc. ("NASD") rules, the '40 Act, the '33 Act or rules thereunder.

  • Equipment and Materials CONTRACTOR shall provide all equipment, materials, and supplies necessary for the performance on the Agreement except:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!