Marks and Licensed Methods Sample Clauses

Marks and Licensed Methods. The Franchisee acknowledges that the Marks and the Licensed Methods are the Franchisor's sole and exclusive property and they may not be duplicated or distributed to or used by anyone unless the Franchisor first gives its permission, and that the Franchisee's only rights in the Marks and the Licensed Methods are as set forth in this Agreement. The Franchisee shall not offer or sell any products or services related to telephone or telecommunications systems or equipment or related products or services except in connection with the Marks and the Franchisee shall not offer or sell any products or services in connection with the Marks without the Franchisor's prior written consent. The Franchisor warrants that it will use diligence and best efforts to insure that its use of the Marks and Licensed Methods shall be of a high standard and be adequate and suited to the protection and enhancement of the Marks and Licensed Methods. Except as permitted in the Operations Manual, the Franchisee agrees not to use any of the Marks as part of an electronic mail address or on any sites on the Internet or World Wide Web and the Franchisee agrees not to use or register any of the Marks as a domain name on the Internet. Any unauthorized use by the Franchisee of the Marks and Licensed Methods shall constitute an infringement of the rights of the Franchisor, for which the Franchisee may be liable for damages or subject to equitable relief for the benefit of the Franchisor. The Franchisee acknowledges and agrees that its use of the Marks and any goodwill established thereby shall inure to the Franchisor's exclusive benefit and that this Agreement does not confer any goodwill or similar interest in the Marks upon the Franchisee.
AutoNDA by SimpleDocs
Marks and Licensed Methods. FRANCHISEE acknowledges that GREASE MONKEY is the sole owner of the Marks and Licensed Methods and the Marks and Licensed Methods shall remain the sole and exclusive property of GREASE MONKEY. FRANCHISEE acknowledges that it has not acquired any right, title or interest in the Marks and Licensed Methods except for the right to use the Marks and Licensed Methods in the operation of its Franchised Business in accordance with this Agreement. FRANCHISEE agrees that no name or xxxx other than the Marks shall be used in the operation of the Franchised Business nor shall any other name, symbols, logo or other identifying marks be used in connection with the Franchised Business without the prior written approval of GREASE MONKEY.

Related to Marks and Licensed Methods

  • Trademarks and Fund Names (a) A I M Management Group Inc. ("AIM" or "licensor"), an affiliate of AVIF, owns all right, title and interest in and to the name, trademark and service xxxx "AIM" and such other tradenames, trademarks and service marks as may be set forth on Schedule B, as amended from time to time by written notice from AIM to LIFE COMPANY (the "AIM licensed marks" or the "licensor's licensed marks") and is authorized to use and to license other persons to use such marks. LIFE COMPANY and its affiliates are hereby granted a non-exclusive license to use the AIM licensed marks in connection with LIFE COMPANY's performance of the services contemplated under this Agreement, subject to the terms and conditions set forth in this Section 19. (b) The grant of license to LIFE COMPANY and its affiliates ( the "licensee") shall terminate automatically upon termination of this Agreement. Upon automatic termination, the licensee shall cease to use the licensor's licensed marks, except that LIFE COMPANY shall have the right to continue to service any outstanding Contracts bearing any of the AIM licensed marks. Upon AIM's elective termination of this license, LIFE COMPANY and its affiliates shall immediately cease to issue any new annuity or life insurance contracts bearing any of the AIM licensed marks and shall likewise cease any activity which suggests that it has any right under any of the AIM licensed marks or that it has any association with AIM, except that LIFE COMPANY shall have the right to continue to service outstanding Contracts bearing any of the AIM licensed marks. (c) The licensee shall obtain the prior written approval of the licensor for the public release by such licensee of any materials bearing the licensor's licensed marks. The licensor's approvals shall not be unreasonably withheld. (d) During the term of this grant of license, a licensor may request that a licensee submit samples of any materials bearing any of the licensor's licensed marks which were previously approved by the licensor but, due to changed circumstances, the licensor may wish to reconsider. If, on reconsideration, or on initial review, respectively, any such samples fail to meet with the written approval of the licensor, then the licensee shall immediately cease distributing such disapproved materials. The licensor's approval shall not be unreasonably withheld, and the licensor, when requesting reconsideration of a prior approval, shall assume the reasonable expenses of withdrawing and replacing such disapproved materials. The licensee shall obtain the prior written approval of the licensor for the use of any new materials developed to replace the disapproved materials, in the manner set forth above. (e) The licensee hereunder: (i) acknowledges and stipulates that, to the best of the knowledge of the licensee, the licensor's licensed marks are valid and enforceable trademarks and/or service marks and that such licensee does not own the licensor's licensed marks and claims no rights therein other than as a licensee under this Agreement; (ii) agrees never to contend otherwise in legal proceedings or in other circumstances; and (iii) acknowledges and agrees that the use of the licensor's licensed marks pursuant to this grant of license shall inure to the benefit of the licensor.

  • Trademarks and Logos 3.1 Licensee accepts and recognizes that Licensor is the sole and exclusive owner of the Lightstreamer trademark and logos related to it. 3.2 Licensee has no right in relation to the use of the Lightstreamer distinctive signs, and Licensee cannot remove such Lightstreamer distinctive signs, modify them or use them autonomously.

  • Trademarks and Trade Names Except as specifically set out in this Agreement, nothing in this Agreement shall grant, suggest, or imply any authority for one Party to use the name, trademarks, service marks, or trade names of the other for any purpose whatsoever.

  • Copyrights, Patents, Trademarks and Licenses, etc The Company and each Subsidiary own or are licensed or otherwise have the right to use all of the material patents, trademarks, service marks, trade names, copyrights, contractual franchises, authorizations and other rights that are reasonably necessary for the operation of their respective businesses, without material conflict with the rights of any other Person. To the best knowledge of the Company, no slogan or other advertising device, product, process, method, substance, part or other material now employed, or now contemplated to be employed, by the Company or any Subsidiary infringes upon any rights held by any other Person. Except as specifically disclosed in Schedule 6.5, no claim or litigation regarding any of the foregoing is pending or, to the knowledge of the Company, threatened, and no patent, invention, device, application, principle or any statute, law, rule, regulation, standard or code is pending or, to the knowledge of the Company, proposed, which, in either case, would reasonably be expected to have a Material Adverse Effect.

  • Patents, Trademarks, Copyrights and Licenses All patents, patent applications, trademarks, trademark applications, service marks, service xxxx applications, copyrights, copyright applications, design rights, tradenames, assumed names, trade secrets and licenses owned or utilized by any Borrower are set forth on Schedule 5.9, are valid and have been duly registered or filed with all appropriate Governmental Bodies and constitute all of the intellectual property rights which are necessary for the operation of its business; there is no objection to or pending challenge to the validity of any such patent, trademark, copyright, design rights, tradename, trade secret or license and no Borrower is aware of any grounds for any challenge, except as set forth in Schedule 5.9 hereto. Each patent, patent application, patent license, trademark, trademark application, trademark license, service xxxx, service xxxx application, service xxxx license, design rights, copyright, copyright application and copyright license owned or held by any Borrower and all trade secrets used by any Borrower consist of original material or property developed by such Borrower or was lawfully acquired by such Borrower from the proper and lawful owner thereof. Each of such items has been maintained so as to preserve the value thereof from the date of creation or acquisition thereof. With respect to all software used by any Borrower, such Borrower is in possession of all source and object codes related to each piece of software or is the beneficiary of a source code escrow agreement, each such source code escrow agreement being listed on Schedule 5.9 hereto.

  • Trademarks, Etc Except to the extent required by applicable law, no Party shall use any other Party's names, logos, trademarks or service marks, whether registered or unregistered, without the prior consent of such Party.

  • Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.

  • Patents, Trademarks and Copyrights Machinery and equipment of the VESSEL, whether made or furnished by the BUILDER under this CONTRACT, may bear the patent numbers, trademarks, or trade names of the manufacturers. The BUILDER shall defend and save harmless the BUYER from all liabilities or claims for or on account of the use of any patents, copyrights or design of any nature or kind, or for the infringement thereof including any unpatented invention made or used in the performance of this CONTRACT and also for any costs and expenses of litigation, if any in connection therewith. No such liability or responsibility shall be with the BUILDER with regard to components and/or equipment and/or design supplied by the BUYER. Nothing contained herein shall be construed as transferring any patent or trademark rights or copyrights in equipment covered by this CONTRACT, and all such rights are hereby expressly reserved to the true and lawful owners thereof.

  • Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.

  • License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!