Common use of Mechanical characteristics Clause in Contracts

Mechanical characteristics. 5.2.2.1. Replacement brake lining assemblies for vehicles of categories X0, X0, X0, X0 ,X0, and L 5.2.2.1.1. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard either ISO 6312:1981 or ISO 6312:2001. The minimum acceptable shear strength is 250 N/cm2 for pad assemblies and 100 N/cm2 for shoe assemblies. 5.2.2.1.2. Replacement brake lining assemblies of the type for which approval is requested shall be tested for compressibility according to standard either ISO 6310:1981, ISO 6310:2001 or ISO 6310:2009. The compressibility values shall not exceed 2 per cent at ambient temperature and 5 per cent at 400 °C for pad assemblies and 2 per cent at ambient temperature and 4 per cent at 200 °C for shoe assemblies. This requirement does not apply to parking brake lining assemblies. 5.2.2.2. Replacement brake lining assemblies and replacement drum brake linings for vehicles of categories X0, X0, X0, O3, and O4 5.2.2.2.1. Shear strength This test applies only to disc brake pad assemblies. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard ISO 6312:1981 or ISO 6312:2001. Brake lining assemblies may by divided into two or three parts to match the test machine's capability. The minimum acceptable shear strength is 250 N/cm2.

Mechanical characteristics. 5.2.2.1. Replacement brake lining assemblies for vehicles of categories X0M1, M2, N1, O0, X0, X0, X0 ,X0, and Lxxx X 5.2.2.1.10.0.2.1.1. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard either ISO 6312:1981 or ISO 6312:2001. The minimum acceptable shear strength is 250 N/cm2 for pad assemblies and 100 N/cm2 for shoe assemblies. 5.2.2.1.2. Replacement brake lining assemblies of the type for which approval is requested shall be tested for compressibility according to standard either ISO 6310:1981, ISO 6310:2001 or ISO 6310:2009. The compressibility values shall not exceed 2 per cent at ambient temperature and 5 per cent at 400 °C for pad assemblies and 2 per cent at ambient temperature and 4 per cent at 200 °C for shoe assemblies. This requirement does not apply to parking brake lining assemblies. 5.2.2.2. Replacement brake lining assemblies and replacement drum brake linings for vehicles of categories M3, N2, N3, O0, xxx X0, X0, X0, O3, and O4 5.2.2.2.1. Shear strength This test applies only to disc brake pad assemblies. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard ISO 6312:1981 or ISO 6312:2001. Brake lining assemblies may by divided into two or three parts to match the test machine's capability. The minimum acceptable shear strength is 250 N/cm2.

Mechanical characteristics. 5.2.2.1. Replacement brake lining assemblies for vehicles of categories X0M1, X0M2, X0N1, X0 ,X0O1, O2, and L 5.2.2.1.1. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard either ISO 6312:1981 or ISO 6312:2001. The minimum acceptable shear strength is 250 N/cm2 for pad assemblies and 100 N/cm2 for shoe assemblies. 5.2.2.1.2. Replacement brake lining assemblies of the type for which approval is requested shall be tested for compressibility according to standard either ISO 6310:1981, ISO 6310:2001 or ISO 6310:2009. The compressibility values shall not exceed 2 per cent at ambient temperature and 5 per cent at 400 °C C for pad assemblies and 2 per cent at ambient temperature and 4 per cent at 200 °C C for shoe assemblies. This requirement does not apply to parking brake lining assemblies. 5.2.2.2. Replacement brake lining assemblies and replacement drum brake linings for vehicles of categories X0M3, X0N2, X0N3, O3, and O4 5.2.2.2.1. Shear strength This test applies only to disc brake pad assemblies. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard ISO 6312:1981 or ISO 6312:2001. Brake lining assemblies may by divided into two or three parts to match the test machine's capability. The minimum acceptable shear strength is 250 N/cm2.

Mechanical characteristics. 5.2.2.15.3.1. Replacement brake lining assemblies for vehicles of categories X0M1, X0M2, X0N1, X0 O1 ,X0O2, and L 5.2.2.1.15.3.1.1. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard either ISO 6312:1981 or ISO 6312:2001. The minimum acceptable shear strength is 250 N/cm2 for pad assemblies and 100 N/cm2 for shoe assemblies. 5.2.2.1.25.3.1.2. Replacement brake lining assemblies of the type for which approval is requested shall be tested for compressibility according to standard Standard either ISO 6310:1981, ISO 6310:2001 6310:1981 or ISO 6310:20096310:2001. The compressibility values shall not exceed 2 per cent at ambient temperature and 5 per cent at 400 °C for pad assemblies and 2 per cent at ambient temperature and 4 per cent at 200 °C for shoe assemblies. This requirement does not apply to parking brake lining assemblies. 5.2.2.25.3.2. Replacement brake lining assemblies and replacement drum brake linings for vehicles of categories X0M3, X0N2, X0N3, O3, and O4 5.2.2.2.15.3.2.1. Shear strength This test applies only to disc brake pad assemblies. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard ISO 6312:1981 or ISO 6312:2001. Brake lining assemblies may by divided into two or three parts to match the test machine's capability. The minimum acceptable shear strength is 250 N/cm2.

Mechanical characteristics. 5.2.2.15.3.1. Replacement brake lining assemblies for vehicles of categories X0, X0, X0, X0 ,X0, and L 5.2.2.1.15.3.1.1. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard either ISO 6312:1981 or ISO 6312:2001. The minimum acceptable shear strength is 250 N/cm2 for pad assemblies and 100 N/cm2 for shoe assemblies. 5.2.2.1.25.3.1.2. Replacement brake lining assemblies of the type for which approval is requested shall be tested for compressibility according to standard Standard either ISO 6310:1981, ISO 6310:2001 6310:1981 or ISO 6310:20096310:2001. The compressibility values shall not exceed 2 per cent at ambient temperature and 5 per cent at 400 °C for pad assemblies and 2 per cent at ambient temperature and 4 per cent at 200 °C for shoe assemblies. This requirement does not apply to parking brake lining assemblies. 5.2.2.25.3.2. Replacement brake lining assemblies and replacement drum brake linings for vehicles of categories X0, X0, X0, O3, and O4 5.2.2.2.15.3.2.1. Shear strength This test applies only to disc brake pad assemblies. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard ISO 6312:1981 or ISO 6312:2001. Brake lining assemblies may by divided into two or three parts to match the test machine's capability. The minimum acceptable shear strength is 250 N/cm2.

Mechanical characteristics. 5.2.2.15.3.1. Replacement brake lining assemblies for vehicles of categories X0, X0, X0, X0 ,X0, and L 5.2.2.1.15.3.1.1. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard either ISO 6312:1981 or ISO 6312:2001. The minimum acceptable shear strength is 250 N/cm2 for pad assemblies and 100 N/cm2 for shoe assemblies. 5.2.2.1.25.3.1.2. Replacement brake lining assemblies of the type for which approval is requested shall be tested for compressibility according to standard Standard either ISO 6310:1981, ISO 6310:2001 6310:1981 or ISO 6310:20096310:2001. The compressibility values shall not exceed 2 per cent at ambient temperature and 5 per cent at 400 °C for pad assemblies and 2 per cent at ambient temperature and 4 per cent at 200 °C for shoe assemblies. This requirement does not apply to parking brake lining assemblies. 5.2.2.25.3.2. Replacement brake lining assemblies and replacement drum brake linings for vehicles of categories X0, X0, X0, O3, and O4 5.2.2.2.15.3.2.1. Shear strength This test applies only to disc brake pad assemblies. Replacement brake lining assemblies of the type for which approval is requested shall be tested for shear strength according to Standard ISO 6312:1981 or ISO 6312:2001. Brake lining assemblies may by divided into two or three parts to match the test machine's capability. The minimum acceptable shear strength is 250 N/cm2.