Monthly Energy Declaration
Monthly Energy Declaration Sample Clauses
Related to Monthly Energy Declaration
Maintenance Agreement The parties will abide by the terms of the Maintenance Agreement including the capacity to dispute the classification in accordance with the Maintenance Agreement (Information Appendix C).
Energy Conservation The Contractor agrees to comply with mandatory standards and policies relating to energy efficiency which are contained in the state energy conservation plan issued in compliance with the Energy Policy and Conservation Act.
Interconnection Agreement Seller shall comply with the terms and conditions of the Interconnection Agreement.
Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and PCS, PCS shall order from Verizon, and Verizon shall provide, the Two-Way Interconnection Trunks and the Entrance Facility, on which such Trunks will ride, and transport and multiplexing, in accordance with the rates, terms and conditions set forth in this Agreement and Verizon’s applicable Tariffs. 2.4.2 Prior to ordering any Two-Way Interconnection Trunks from Verizon, PCS shall meet with Verizon to conduct a joint planning meeting (“Joint Planning Meeting”). At that Joint Planning Meeting, each Party shall provide to the other Party originating Centium Call Second (Hundred Call Second) information, and the Parties shall mutually agree on the appropriate initial number of Two-Way End Office and Tandem Interconnection Trunks and the interface specifications at the Point of Interconnection (POI). Where the Parties have agreed to convert existing One-Way Interconnection Trunks to Two-Way Interconnection Trunks, at the Joint Planning Meeting, the Parties shall also mutually agree on the conversion process and project intervals for conversion of such One-Way Interconnection Trunks to Two-Way Interconnection Trunks. 2.4.3 Two-Way Interconnection Trunks shall be from a Verizon End Office or Tandem to a mutually agreed upon POI. 2.4.4 On a semi-annual basis, PCS shall submit a good faith forecast to Verizon of the number of End Office and Tandem Two-Way Interconnection Trunks that PCS anticipates Verizon will need to provide during the ensuing two (2) year period to carry traffic from PCS to Verizon and from Verizon to PCS. PCS’s trunk forecasts shall conform to the Verizon CLEC trunk forecasting guidelines as in effect at that time. 2.4.5 The Parties shall meet (telephonically or in person) from time to time, as needed, to review data on End Office and Tandem Two-Way Interconnection Trunks to determine the need for new trunk groups and to plan any necessary changes in the number of Two-Way Interconnection Trunks. 2.4.6 Two-Way Interconnection Trunks shall have SS7 Common Channel Signaling. The Parties agree to utilize B8ZS and Extended Super Frame (ESF) DS1 facilities, where available. 2.4.7 With respect to End Office Two-Way Interconnection Trunks, both Parties shall use an economic Centium Call Second (Hundred Call Second) equal to five (5). 2.4.8 Two-Way Interconnection Trunk groups that connect to a Verizon access Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.005 during the average time consistent busy hour. Two-Way Interconnection Trunk groups that connect to a Verizon local Tandem shall be engineered using a design blocking objective of Xxxx-Xxxxxxxxx B.01 during the average time consistent busy hour. Verizon and PCS shall engineer Two-Way Interconnection Trunks using BOC Notes on the LEC Networks SR-TSV-002275. 2.4.9 The performance standard for final Two-Way Interconnection Trunk groups shall be that no such Interconnection Trunk group will exceed its design blocking objective (B.005 or B.01, as applicable) for three
One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Onvoy to Frontier, Onvoy, at Xxxxx’s own expense, shall: 2.3.1.1 provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA; and/or 2.3.1.2 obtain transport for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA (a) from a third party, or, (b) if Frontier offers such transport pursuant to a Frontier access Tariff, from Frontier. 2.3.2 For each Tandem or End Office One-Way Interconnection Trunk group for delivery of traffic from Onvoy to Frontier with a utilization level of less than sixty percent (60%) for final trunk groups and eighty-five percent (85%) for high usage trunk groups, unless the Parties agree otherwise, Onvoy will promptly submit ASRs to disconnect a sufficient number of Interconnection Trunks to attain a utilization level of approximately sixty percent (60%) for all final trunk groups and eighty-five percent (85%) for all high usage trunk groups. In the event Onvoy fails to submit an ASR to disconnect One-Way Interconnection Trunks as required by this Section, Frontier may disconnect the excess Interconnection Trunks or bill (and Onvoy shall pay) for the excess Interconnection Trunks at the rates set forth in the Pricing Attachment. 2.3.3 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from Frontier to Onvoy, Frontier, at Frontier’s own expense, shall provide its own facilities for delivery of the traffic to the technically feasible Point(s) of Interconnection on Frontier’s network in a LATA.
Operating Agreement The Borrower will not amend, modify, waive or terminate any provision of its operating agreement without the prior written consent of the Administrative Agent.
Payment of Charges (a) Subject to Section 5.2(b), each Credit Party shall pay and discharge or cause to be paid and discharged promptly all Charges payable by it, including (i) Charges imposed upon it, its income and profits, or any of its property (real, personal or mixed) and all Charges with respect to tax, social security and unemployment withholding with respect to its employees, (ii) lawful claims for labor, materials, supplies and services or otherwise, and (iii) all storage or rental charges payable to warehousemen and bailees, in each case, before any thereof shall become past due. (b) Each Credit Party may in good faith contest, by appropriate proceedings, the validity or amount of any Charges, Taxes or claims described in Section 5.2(a); provided, that (i) adequate reserves with respect to such contest are maintained on the books of such Credit Party, in accordance with GAAP; (ii) no Lien shall be imposed to secure payment of such Charges (other than payments to warehousemen and/or bailees) that is superior to any of the Liens securing payment of the Obligations and such contest is maintained and prosecuted continuously and with diligence and operates to suspend collection or enforcement of such Charges, (iii) none of the Collateral becomes subject to forfeiture or loss as a result of such contest, (iv) such Credit Party shall promptly pay or discharge such contested Charges, Taxes or claims and all additional charges, interest, penalties and expenses, if any, and shall deliver to Agent evidence reasonably acceptable to Agent of such compliance, payment or discharge, if such contest is terminated or discontinued adversely to such Credit Party or the conditions set forth in this Section 5.2(b) are no longer met, and (v) Agent has not advised Borrower in writing that Agent reasonably believes that nonpayment or nondischarge thereof could have or result in a Material Adverse Effect.
Payment of Utilities Pay for electricity and all other utilities consumed in or relating to the Subject Unit and proportionately for the Common Portions.
COLLECTION OF CHARGES 16.1 A Sector Association may request the consent of the Administrator to collect charges due from Operators to the Administrator in respect of facilities under the charging scheme. 16.2 If a Sector Association wishes to collect charges due from an Operator to the Administrator under the charging scheme, the Sector Association may serve a notice in writing on the Administrator by the last working day in February in the calendar year in which the charges fall due. 16.3 A notice served under Rule 16.2 must specify the facilities in respect of which the Sector Association intends to collect charges, being not fewer than 50% of the facilities covered by an umbrella agreement. 16.4 Following receipt of the notice, the Administrator must: 16.4.1 consent to the Sector Association collecting charges; or 16.4.2 refuse consent to the Sector Association collecting charges, giving reasons for the decision. 16.5 If the Administrator consents to the Sector Association collecting charges the Sector Association must: 16.5.1 itemise charges separately in any invoices that it issues in respect of charges; 16.5.2 collect and remit all charges collected to the Administrator without deduction or set off by the last working day in September in each year; 16.5.3 prepare an annual report to the Administrator by the last working day in October in the year in which it has collected charges setting out which Operators it has collected charges from and which Operators have failed to pay charges due to the Sector Association. 16.6 A Sector Association must not actively pursue any outstanding charges after the last working day in September in any year in which they fall due. If a Sector Association receives charges after this date the Sector Association must accept the payment and remit this to the Environment Agency along with information identifying the Operator making the payment. 16.7 If a Sector Association fails to comply with any of its obligations under this Rule the Administrator may serve a notice on the Sector Association that consent to the Sector Association continuing to collect charges is withdrawn at the expiry of 20 working days from the date of the notice.
Electric Storage Resources Developer interconnecting an electric storage resource shall establish an operating range in Appendix C of its LGIA that specifies a minimum state of charge and a maximum state of charge between which the electric storage resource will be required to provide primary frequency response consistent with the conditions set forth in Articles 9.5.5, 9.5.5.1, 9.5.5.2, and 9.5.5.3 of this Agreement. Appendix C shall specify whether the operating range is static or dynamic, and shall consider (1) the expected magnitude of frequency deviations in the interconnection; (2) the expected duration that system frequency will remain outside of the deadband parameter in the interconnection; (3) the expected incidence of frequency deviations outside of the deadband parameter in the interconnection; (4) the physical capabilities of the electric storage resource; (5) operational limitations of the electric storage resources due to manufacturer specification; and (6) any other relevant factors agreed to by the NYISO, Connecting Transmission Owner, and Developer. If the operating range is dynamic, then Appendix C must establish how frequently the operating range will be reevaluated and the factors that may be considered during its reevaluation. Developer’s electric storage resource is required to provide timely and sustained primary frequency response consistent with Article 9.5.5.2 of this Agreement when it is online and dispatched to inject electricity to the New York State Transmission System and/or receive electricity from the New York State Transmission System. This excludes circumstances when the electric storage resource is not dispatched to inject electricity to the New York State Transmission System and/or dispatched to receive electricity from the New York State Transmission System. If Developer’s electric storage resource is charging at the time of a frequency deviation outside of its deadband parameter, it is to increase (for over-frequency deviations) or decrease (for under-frequency deviations) the rate at which it is charging in accordance with its droop parameter. Developer’s electric storage resource is not required to change from charging to discharging, or vice versa, unless the response necessitated by the droop and deadband settings requires it to do so and it is technically capable of making such a transition.
