OpenACC Sample Clauses

OpenACC. OpenACC is a maintained by a non-profit corporation very similar to OpenMP. OpenACC provides an API very similar to OpenMP in approach which allows offload of processing to accelerators such as GPUs (as opposed to OpenMP which explicitly assumes that all processing will be undertaken on the host CPU or SMP system). Motivation. The desire to bring the simplicity of OpenMP to accelerator programming is an obvious motivation. Either by slightly modifying and extending OpenMP, or using automatic communication generation and offloading techniques. The best representative of the latter is the work based on the Cetus compiler framework, aiming to translate OpenMP to CUDA directly. In parallel, the OpenMP group started a working group with the goal of integrating OpenMP with accelerators. This working group is making good progress in this direction, but not good enough to release a specification with the OpenMP name on it. OpenACC was therefore created as a way to get something released without having to worry about incompleteness and future incompatibility with OpenMP, and as a way to get real-world feedback for when the features are integrated into the next version of OpenMP.
Sample 1
AutoNDA by SimpleDocs

Related to OpenACC

  • meminta nasihat daripada Pihak Xxxxxx dalam semua perkara berkenaan dengan jualan lelongan, termasuk Syarat-syarat Jualan (iii) membuat carian Hakmilik Xxxxx xxxxxx rasmi di Pejabat Tanah xxx/atau xxxx-xxxx Pihak-pihak Berkuasa yang berkenaan xxx (iv) membuat pertanyaan dengan Pihak Berkuasa yang berkenaan samada jualan ini terbuka kepada semua bangsa atau kaum Bumiputra Warganegara Malaysia sahaja atau melayu sahaja xxx juga mengenai persetujuan untuk jualan ini sebelum jualan lelong.Penawar yang berjaya (“Pembeli”) dikehendaki dengan segera memohon xxx mendapatkan kebenaran pindahmilik (jika ada) daripada Pihak Pemaju xxx/atau Pihak Tuanpunya xxx/atau Pihak Berkuasa Negeri atau badan-badan berkenaan (v) memeriksa xxx memastikan samada jualan ini dikenakan cukai. BUTIR-BUTIR HARTANAH : HAKMILIK : Hakmilik strata bagi hartanah ini masih belum dikeluarkan oleh pihak berkuasa. NO. HAKMILIK INDUK / NO. LOT : Geran 203771, Lot 106 Seksyen 3 PEKAN/DAERAH/NEGERI : Pekan Batu Tiga / Petaling / Selangor Darul Ehsan PEGANGAN : Selama-lamanya KELUASAN LANTAI : 93.65 meter persegi (1,008 kaki persegi) PEMAJU : Shanghai Realty (M) Sdn Bhd (350799-U) XXXXXXXX XXX : Xxxxxxxx Xxxxx Bin Xxxxxx BEBANAN : Diserahhak kepada RHB Islamic Bank Berhad (200501003283/680329-V) LOKASI XXX PERIHAL HARTANAH Hartanah tersebut terletak di Pangsapuri Indahria, Xx. 0, Xxxxx Xxxx Xxxx-Xxxxxx Xxxxx, Xxxxx Xxxxxxx, Xxxxxxx 00, 00000 Xxxx Xxxx, Xxxxxxxx Xxxxx Xxxxx. Hartanah tersebut adalah sebuah unit pangsapuri dikenali sebagai Xxxxx Pemaju No. P5-2-11, Tingkat No. 2, Bangunan No. P5, berserta dengan Xxxxx Aksesori No. GRD-07, Pangsapuri Indahria xxx mempunyai alamat surat-menyurat di Unit No. P5-02-11, Pangsapuri Indahria, Xx. 0, Xxxxx Xxxx Xxxx-Xxxxxx Xxxxx, Xxxxx Xxxxxxx, Xxxxxxx 00, 00000 Xxxx Xxxx, Xxxxxxxx Xxxxx Xxxxx. HARGA RIZAB: Harta ini dijual “keadaan seperti mana sediada” dengan harga rizab sebanyak RM 270,000.00 (RINGGIT MALAYSIA: DUA RATUS XXX TUJUH PULUH RIBU SAHAJA) xxx tertakluk kepada syarat-syarat Jualan xxx melalui penyerahan hakkan dari Pemegang Serahak, tertakluk kepada kelulusan di perolehi oleh pihak Pembeli daripada pihak berkuasa, jika ada, termasuk semua terma, syarat xxx perjanjian yang dikenakan xxx mungkin dikenakan oleh Pihak Berkuasa yang berkenaan. Pembeli bertanggungjawab sepenuhnya untuk memperolehi xxx mematuhi syarat- syarat berkenaan daripada Pihak Berkuasa yang berkenaan, jika ada xxx semua xxx xxx perbelanjaan ditanggung xxx dibayar oleh Xxxxx Xxxxxxx.Pembeli atas talian (online) juga tertakluk kepada terma-terma xxx syarat-syarat terkandung dalam xxx.xxxxxxxxxxxxxxxx.xxx Pembeli yang berminat adalah dikehendaki mendeposit kepada Pelelong 10% daripada harga rizab dalam bentuk Bank Draf atau Cashier’s Order di atas nama RHB Islamic Bank Berhad sebelum lelongan awam xxx xxxx xxxx xxxxxx bersama-sama dengan segala cukai jualan xxx perkhidmatan (SST) xxx/atau cukai yang menggantikan SST hendaklah dibayar dalam tempoh sembilan puluh (90) hari dari tarikh lelongan kepada RHB Islamic Bank Berhad melalui XXXXXX. Butir-butir pembayaran melalui XXXXXX, xxxx berhubung dengan Tetuan T. Rajagopalu & Co. Untuk maklumat lanjut, xxxx berhubung dengan TETUAN T. RAJAGOPALU & CO, Solicitors for Assignee herein whose address is at Xxxxx 0-0, Xxxxxxxx Xxxx Xxxxxx Xxxxx Xxxxx, 00000 Xxxxxxxx Xxxxxx Xxxxxxxx. Tel: 00-0000000 / Fax: 00-0000000 [Ruj: RG/RHB/0339/2023/SYAFIQAH(yusof)], peguamcara bagi pihak pemegang xxxxx xxx atau pelelong yang tersebut dibawah. RAJAN AUCTIONEERS SDN. BHD. X. XXXXX Xx.00X,Xxxxxxx Xxxx,Xxxxx Xxxx Xxxxxx, ( Xxxxxxxx Berlesen ) 41000 Klang, Selangor Darul Ehsan. H/P: 000-0000000 Tel: 00-00000000 / Fax : 00-00000000 H/P: 012-2738109 Ruj Kami: RA/RHBI/TRC/NS/4220-24(fz) CONDITIONS OF SALE

  • Data Storage Where required by applicable law, Student Data shall be stored within the United States. Upon request of the LEA, Provider will provide a list of the locations where Student Data is stored.

  • Signaling Link Transport 9.2.1 Signaling Link Transport is a set of two or four dedicated 56 kbps transmission paths between Global Connection-designated Signaling Points of Interconnection that provide appropriate physical diversity.

  • Metode Penelitian Penelitian ini bersifat deskriptif. Jenis penelitian yang digunakan adalah hukum normatif. Sumber data yang dipergunakan pada penelitian ini adalah data sekunder yang terdiri dari :

  • Dewatering 4.7.1 Where a part of a site is affected by surface water following a period of rain, thus rendering some areas unsafe for productive work, consistent with the Employer’s obligations under the OH&S Act, all non- trades employees shall assist in ‘dewatering’ their own work site or area if it is so affected. Such work to be paid at single time rates. Productive work will continue in areas not so affected.

  • Modern Slavery You hereby affirm your compliance with the Modern Slavery Xxx 0000 and associated guidance. You confirm (a) that you have read, are familiar with and shall not perform an act or omission which is in contravention with, the letter or spirit of the Act; and (b) you carry out regular, meaningful and comprehensive due diligence procedures and have internal policies in place to address any suspected human rights abuse in your business and Group where applicable.

  • Checkoff The Employer shall deduct the bi-weekly membership dues from the earnings of those employees who authorize such deductions in writing. The Union shall submit such authorizations and certify the amounts to be deducted at least seven (7) days prior to the end of the payroll period for which the deductions are to be effective and the deductions shall continue in effect until canceled by the employee through the Union. The aggregate deductions of all employees, together with a detailed record, shall be remitted to the Union office within ten (10) days after such deductions are made.

  • Petroleum Storage Systems A. At Company’s expense, Company will at all times comply with all federal, state, and local requirements, including but not limited to, the regulations of the FDEP as stated in Chapters 62-761 and 62-762, FAC, the requirements of the Federal Oil Pollution Prevention regulation found in Title 40 of the Code of Federal Regulations Part 112 (40 CFR part 112), as well as the requirements of the Environmental Protection Commission of Hillsborough County (EPC), as may be amended or replaced, pertaining to petroleum storage tank and piping system construction, operation, inspection, and compliance monitoring programs; release detection methods and procedures; maintenance; and preventative maintenance programs. Company will be responsible for all spillage, overflow, or escape of gases, petroleum or petroleum products, and for all fines and penalties in connection therewith. All petroleum storage systems will be registered by Company, and Company will display the registration placard as required by law.

  • Millwright Xxxxx be to assist and work under the direction and instructions I or A. He will work alone at times performing assignments in keeping with his training. During the course of his year, training must become proficient in good practices in the areas of fitting, aligning, lubricating and the operation of all shop tools and machines. In addition to the foregoing, he will be exposed to and the process of learning techniques required in trouble shooting key production machinery, pipe fitting, basic welding and machining but not be expected to display a high degree of proficiency in these areas at this point. Millwright Must be capable of performing the tasks of fittings, aligning, lubricating an able to operate all shop tools and machines. Must under direction become proficient in basic welding and pipe fitting as well as dismantling and reassembly of plant equipment. Under direction,will continueto develop skills in trouble shooting all plant equipment and improve his skills at machining part and be exposed to basic principles of hydraulics and pneumatic. He may work alone frequently, but occasionally will require direction and instructions form Millwright I or A. Millwright 11: be capable, without direction of fitting, aligning and lubrication and taking apart and reassembling plant equipment. In addition, is expected to be able to weld, operate shop tools and do pipe fitting as required. Must under direction, become proficient at effective methods of trouble shooting and repairing hydraulic, pneumatic and mechanical faults in plant machinery. I: Must be capable without direction of performing all practices under Xxxxxxxxxx Must under directionbecomeproficient at reading and understanding blueprints, all phases of installing new equipment, laying out hydraulic and mechanical drives and meet speed and power requirements correctly. Xxxxxxxxxx "A": Must he capable without direction, of performing all under Xxxxxxxxxx X, and Must take full responsibility for work done by himself or his assistant. Must he in possession of a Millwright Certificate or a Machinist Certificate or Welder Certificate. Millwrightspresently employed in this classification will not be required to have a Certificate.

  • SBC-13STATE shall provide to CLEC Interconnection of the Parties’ facilities and equipment for the transmission and routing of Telephone Exchange Service traffic and Exchange Access traffic pursuant to the applicable Appendix ITR, which is/are attached hereto and incorporated herein by reference. Methods for Interconnection and Physical Architecture shall be as defined in the applicable Appendix NIM, which is/are attached hereto and incorporated herein by reference.

Time is Money Join Law Insider Premium to draft better contracts faster.