Shared Transport The Shared Transport Network Element (“Shared Transport”) provides the collective interoffice transmission facilities shared by various Carriers (including Qwest) between end-office switches and between end-office switches and local tandem switches within the Local Calling Area. Shared Transport uses the existing routing tables resident in Qwest switches to carry the End User Customer’s originating and terminating local/extended area service interoffice Local traffic on the Qwest interoffice message trunk network. CLEC traffic will be carried on the same transmission facilities between end- office switches, between end-office switches and tandem switches and between tandem switches on the same network facilities that Qwest uses for its own traffic. Shared Transport does not include use of tandem switches or transport between tandem switches and end-office switches for Local Calls that originate from end users served by non- Qwest Telecommunications Carriers (“Carrier(s)”) which terminate to QLSP End Users.
ARTICLE MANAGEMENT RIGHTS The Union recognizes and acknowledges that it is the exclusive function of the Employer, subject to the express provisions of this Agreement to:
Additional Access Rights For the avoidance of doubt any grant of Access Rights not covered by the Grant Agreement or this Consortium Agreement shall be at the absolute discretion of the owning Party and subject to such terms and conditions as may be agreed between the owning and receiving Parties.
Switching and Tagging Rules Each Party shall provide the other Parties a copy of its switching and tagging rules that are applicable to the other Parties’ activities. Such switching and tagging rules shall be developed on a non-discriminatory basis. The Parties shall comply with applicable switching and tagging rules, as amended from time to time, in obtaining clearances for work or for switching operations on equipment.
ADJUSTMENT OF THE DISTRIBUTOR’S ALLOCABLE PORTION AND EACH SUCCESSOR DISTRIBUTOR’S ALLOCABLE PORTION The parties to the Distribution Agreement recognize that, if the terms of any distributor’s contract, any distribution plan, any prospectus, the FINRA Conduct Rules or any other applicable law change so as to disproportionately reduce, in a manner inconsistent with the intent of this Distribution Agreement, the amount of the Distributor’s Allocable Portion or any Successor Distributor’s Allocable Portion had no such change occurred, the definitions of the Distributor’s Allocable Portion and/or the Successor Distributor’s Allocable Portion in respect of the Class C shares relating to a Fund shall be adjusted by agreement among the relevant parties; provided, however, if the Distributor, the Successor Distributor and the Fund cannot agree within thirty (30) days after the date of any such change in applicable laws or in any distributor’s contract, distribution plan, prospectus or the FINRA Conduct Rules, they shall submit the question to arbitration in accordance with the commercial arbitration rules of the American Arbitration Association and the decision reached by the arbitrator shall be final and binding on each of them. The following relates solely to Class 529-C shares. The Distributor’s Allocable Portion of Distribution Fees and CDSCs in respect of Class 529-C shares shall be 100% until such time as the Distributor shall cease to serve as exclusive distributor of Class 529-C shares; thereafter, collections that constitute CDSCs and Distribution Fees relating to Class 529-C shares shall be allocated among the Distributor and any successor distributor (“Successor Distributor”) in accordance with this Schedule. At such time as the Distributor’s Allocable Portion of the Distribution Fees equals zero, the Successor Distributor shall become the Distributor for purposes of this Allocation Schedule. Defined terms used in this Schedule and not otherwise defined herein shall have the meanings assigned to them in the Principal Underwriting Agreement (the “Distribution Agreement”), of which this Schedule is a part. As used herein the following terms shall have the meanings indicated:
Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.
Remote Terminal Unit Prior to the Initial Synchronization Date of the Large Generating Facility, a Remote Terminal Unit, or equivalent data collection and transfer equipment acceptable to the Parties, shall be installed by Developer, or by Connecting Transmission Owner at Developer’s expense, to gather accumulated and instantaneous data to be telemetered to the location(s) designated by Connecting Transmission Owner and NYISO through use of a dedicated point-to-point data circuit(s) as indicated in Article 8.
1. The communication protocol for the data circuit(s) shall be specified by Connecting Transmission Owner and NYISO. Instantaneous bi-directional analog real power and reactive power flow information must be telemetered directly to the location(s) specified by Connecting Transmission Owner and NYISO. Each Party will promptly advise the appropriate other Party if it detects or otherwise learns of any metering, telemetry or communications equipment errors or malfunctions that require the attention and/or correction by that other Party. The Party owning such equipment shall correct such error or malfunction as soon as reasonably feasible.
Terminal Pay Any employee at normal retirement or his/her beneficiary if service is terminated by death, shall be provided terminal pay. Such terminal pay shall not exceed an amount determined as follows:
1. During the first three (3) years of service:
a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 35 percent multiplied by the number of unused sick leave days held on July 1, 1994.
b. The affected employee’s daily rate of pay at the time sick leave is earned times 35 percent times the number of days of accumulated sick leave earned after July 1, 1994.
2. During the fourth (4th) through sixth (6th) years of service:
a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 40 percent multiplied by the number of unused sick leave days held on July 1, 1994.
b. The affected employee’s daily rate of pay at the time sick leave is earned times 40 percent times the number of days of accumulated sick leave earned after July 1, 1994.
3. During the seventh (7th) through ninth (9th) years of service:
a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 45 percent multiplied by the number of unused sick leave days held on July 1, 1994.
b. The affected employee’s daily rate of pay at the time sick leave is earned times 45 percent times the number of days of accumulated sick leave earned after July 1, 1994.
4. During the tenth (10th) through the twelfth (12th) year of service:
a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 50 percent multiplied by the number of unused sick leave days held on July 1, 1994.
b. The affected employee’s daily rate of pay at the time sick leave is earned times 50 percent times the number of days of accumulated sick leave earned after July 1, 1994.
5. During and after the thirteenth (13th) year of service:
a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by the number of unused sick leave days held on July 1, 1994.
b. The affected employee’s daily rate of pay at the time sick leave is earned* multiplied by the number of days of accumulated sick leave earned.
6. No employee who meets the eligibility requirements listed above may receive any compensation for sick leave payments unless they sign and execute the Payment of Sick Leave Upon Retirement Agreement provided by the Superintendent. This Agreement requires the retiring Board employee to seek, accept, and cash the first retirement benefit check issued by the Florida Retirement System. The employee must qualify for “normal retirement” which under this policy shall mean retirement under plan A, B, C, D, E under the Florida Retirement System or any other plan established by the Legislature with either full or reduced benefits as provided by law. Normal retirement shall not be interpreted to include disability retirement. *Note: “At the time sick leave is earned” shall be interpreted to mean the value of sick leave at the end of each school year or at the time the affected employee retires, whichever comes first.
CFR PART 200 Contract Provisions Explanation Required Federal contract provisions of Federal Regulations for Contracts for contracts with ESC Region 8 and TIPS Members: The following provisions are required to be in place and agreed if the procurement is funded in any part with federal funds. The ESC Region 8 and TIPS Members are the subgrantee or Subrecipient by definition. Most of the provisions are located in 2 CFR PART 200 - Appendix II to Part 200—Contract Provisions for Non-Federal Entity Contracts Under Federal Awards at 2 CFR PART 200. Others are included within 2 CFR part 200 et al. In addition to other provisions required by the Federal agency or non-Federal entity, all contracts made by the non- Federal entity under the Federal award must contain provisions covering the following, as applicable.
PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:
