Other Licensees Attachments Sample Clauses

Other Licensees Attachments. Upon notice from the SPA, Municipality must promptly perform (within the time period specified by the SPA) any make-ready work necessary on Municipality’s Attachments, Overlashings or Facilities to Accommodate an Other Licensees’s attachment to a Pole. Municipality may send an invoice to and collect from each Other Licensee payment for the costs incurred by Municipality to perform the make-ready work. If Municipality fails to perform the make-ready work within the time period specified by the SPA, Frontier will have (a) the right to assess the Non-Conforming Charge in accordance with Section 13.10, or (b) the right, but not the obligation, to perform the make-ready work and charge Other Licensee the cost of performing the work. Municipality is entitled to enter into separate agreements in which Municipality may authorize the Other Owners, Owner, Other Licensees or third parties to perform the make-ready work on Municipality’s behalf.
AutoNDA by SimpleDocs

Related to Other Licensees Attachments

  • Sublicense Agreements Sublicenses under this Section 2.3 shall be granted only pursuant to written agreements, which shall be subject to and consistent with the terms and conditions of this Agreement. Such Sublicense agreements shall contain, among other things, provisions to the following effect: 2.3.2.1 all provisions necessary to ensure Licensee’s ability to comply with Licensee’s obligation under or not violate the provisions of Sections 4.4, 4.5, 4.6, 5.1, 5.3, 5.4, 8.1 and 11.1; 2.3.2.2 a section substantially the same as Article 9 (Indemnification), which also shall state that the Indemnitees (as defined in Section 9.1) are intended third party beneficiaries of such Sublicense agreement for the purpose of enforcing such indemnification; 2.3.2.3 in the event of termination of the license set forth in Section 2.1.1 above (in whole or in part (e.g., termination of the license as to a Licensed Product or in a particular country)), any existing Sublicense shall terminate to the extent of such terminated license; provided, however, that, for each Sublicensee, upon termination of the license, if the Sublicensee is not then in breach of the Sublicense agreement such that Licensee would have the right to terminate such Sublicense agreement, such Sublicensee shall have the right to obtain a license from Harvard on the same terms and conditions as set forth herein, which shall not impose any representations, warranties, obligations or liabilities on Harvard that are not included in this Agreement, provided that (a) the scope of the license granted directly by Harvard to such Sublicensee shall be coextensive with the scope of the license granted by Licensee to such Sublicensee, (b) if the Sublicense granted to such Sublicensee was non-exclusive, such Sublicensee shall not have the right to participate in the prosecution or enforcement of the Patent Rights under the license granted to it directly by Harvard and (c) if there are more than one Sublicensee, each Sublicensee that is granted a direct license shall be responsible for a pro rata share of the reimbursement due under Section 6.2.3 of this Agreement (based on the number of direct licenses under the Patent Rights in effect on the date of reimbursement); 2.3.2.4 the Sublicensee shall only be entitled to sublicense its rights under such Sublicense agreement on the terms set forth in this Section 2.3; and 2.3.2.5 the Sublicensee shall not be entitled to assign the Sublicense agreement without the prior written consent of Harvard, except that Sublicensee may assign the Sublicense agreement to a successor in connection with the merger, consolidation or sale of all or substantially all of its assets or that portion of its business to which the Sublicense agreement relates; provided, however, that any permitted assignee agrees in writing in a manner reasonably satisfactory to Harvard to be bound by the terms of such Sublicense agreement.

  • License Terms This license is for one full Semester. It cannot be cancelled or terminated except under the conditions cited in this license.

  • Vendor’s Specific Warranties, Terms, and License Agreements Because TIPS serves public entities and non-profits throughout the nation all of which are subject to specific laws and policies of their jurisdiction, as a matter of standard practice, TIPS does not typically accept a Vendor’s specific “Sale Terms” (warranties, license agreements, master agreements, terms and conditions, etc.) on behalf of all TIPS Members. TIPS may permit Vendor to attach those to this Agreement to display to interested customers what terms may apply to their Supplemental Agreement with Vendor (if submitted by Vendor for that purpose). However, unless this term of the Agreement is negotiated and modified to state otherwise, those specific Sale Terms are not accepted by TIPS on behalf of all TIPS Members and each Member may choose whether to accept, negotiate, or reject those specific Sale Terms, which must be reflected in a separate agreement between Vendor and the Member in order to be effective.

  • License Agreements (a) Each Borrower and Guarantor shall (i) promptly and faithfully observe and perform all of the material terms, covenants, conditions and provisions of the material License Agreements to which it is a party to be observed and performed by it, at the times set forth therein, if any, (ii) not do, permit, suffer or refrain from doing anything that could reasonably be expected to result in a default under or breach of any of the terms of any material License Agreement, (iii) not cancel, surrender, modify, amend, waive or release any material License Agreement in any material respect or any term, provision or right of the licensee thereunder in any material respect, or consent to or permit to occur any of the foregoing; except, that, subject to Section 9.19(b) below, such Borrower or Guarantor may cancel, surrender or release any material License Agreement in the ordinary course of the business of such Borrower or Guarantor; provided, that, such Borrower or Guarantor (as the case may be) shall give Agent not less than thirty (30) days prior written notice of its intention to so cancel, surrender and release any such material License Agreement, (iv) give Agent prompt written notice of any material License Agreement entered into by such Borrower or Guarantor after the date hereof, together with a true, correct and complete copy thereof and such other information with respect thereto as Agent may request, (v) give Agent prompt written notice of any material breach of any obligation, or any default, by any party under any material License Agreement, and deliver to Agent (promptly upon the receipt thereof by such Borrower or Guarantor in the case of a notice to such Borrower or Guarantor and concurrently with the sending thereof in the case of a notice from such Borrower or Guarantor) a copy of each notice of default and every other notice and other communication received or delivered by such Borrower or Guarantor in connection with any material License Agreement which relates to the right of such Borrower or Guarantor to continue to use the property subject to such License Agreement, and (vi) furnish to Agent, promptly upon the request of Agent, such information and evidence as Agent may reasonably require from time to time concerning the observance, performance and compliance by such Borrower or Guarantor or the other party or parties thereto with the material terms, covenants or provisions of any material License Agreement. (b) Each Borrower and Guarantor will either exercise any option to renew or extend the term of each material License Agreement to which it is a party in such manner as will cause the term of such material License Agreement to be effectively renewed or extended for the period provided by such option and give prompt written notice thereof to Agent or give Agent prior written notice that such Borrower or Guarantor does not intend to renew or extend the term of any such material License Agreement or that the term thereof shall otherwise be expiring, not less than sixty (60) days prior to the date of any such non-renewal or expiration. In the event of the failure of such Borrower or Guarantor to extend or renew any material License Agreement to which it is a party, Agent shall have, and is hereby granted, the irrevocable right and authority, at its option, to renew or extend the term of such material License Agreement, whether in its own name and behalf, or in the name and behalf of a designee or nominee of Agent or in the name and behalf of such Borrower or Guarantor, as Agent shall determine at any time that an Event of Default shall exist or have occurred and be continuing. Agent may, but shall not be required to, perform any or all of such obligations of such Borrower or Guarantor under any of the License Agreements, including, but not limited to, the payment of any or all sums due from such Borrower or Guarantor thereunder. Any sums so paid by Agent shall constitute part of the Obligations. (c) No Borrower or Guarantor shall assign, sell, mortgage, lease, transfer, pledge, hypothecate, grant a security interest in or lien upon, encumber, grant an exclusive or non-exclusive license relating to any Intellectual Property, or otherwise dispose of any Intellectual Property, in each case without the prior written consent of Agent, except that any Borrower or Guarantor may, after written notice to Agent, grant a non-exclusive license relating to any Intellectual Property to another Borrower or Guarantor in the ordinary course of business.

  • Xxxxx of License Georgia Institute of Technology shall grant the Student a limited, nonexclusive, nontransferable and revocable license to use and occupy an assigned space in a Georgia Institute of Technology facility in accordance with the terms and conditions of this Contract (the “License”). The parties to this Contract do not intend that an estate, a tenancy or any other interest in property should pass from Georgia Institute of Technology to Student. Instead, it is the intention of the parties that the relationship between Georgia Institute of Technology and Student be that of licensor and licensee and the sole right of Student to use the assigned space as a living unit shall be based upon the License granted in this Contract.

  • Marking of Licensed Products To the extent commercially feasible and consistent with prevailing business practices, Company shall xxxx, and shall cause its Affiliates and Sublicensees to xxxx, all Licensed Products that are manufactured or sold under this Agreement with the number of each issued patent under the Patent Rights that applies to such Licensed Product.

  • License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.

  • Licensed Patents 9.1.1 Oculis shall be responsible for and shall have the exclusive right with respect to, the preparation, filing, prosecution, protection, maintenance and enforcement of all Patent Rights in respect of the Licensed Technology in its discretion using its patent counsel. Oculis shall consult with Accure with respect thereto, supply Accure with a copy of the application as filed, together with notice of its filing date and serial number; and keep Accure advised of the status of actual and prospective Patent Right filings, including office actions, and keep Accure informed about and provide copies of all the relevant information exchanged between Oculis and the different Industrial or Intellectual Property Registration Offices regarding the prosecution, maintenance, defense and enforcement of the Licensed Patents. The cost and expense of filing, prosecuting, maintaining and enforcing all Licensed Patents shall be borne by Oculis. Accure shall, and hereby procures its personnel will, provide all requested information and perform all acts reasonably requested by Oculis in connection with the prosecution, maintenance, defense or enforcement of the Licensed Technology. Without limiting the foregoing, Accure and its Affiliates may not file for further Patent Rights relating to Licensed Technology. 9.1.2 Should Oculis not be interested in the prosecution, defense and maintenance of any or all of the Licensed Patents, and/or Xxxxxx decides not to pay all reasonable and necessary expenses with respect to the prosecution, defense or maintenance of any Licensed Patent before any upcoming deadline, Oculis shall give reasonable advance notice to Accure (no less than [***]), and subsequent to such notice Accure shall act as it deems appropriate in connection with the prosecution, defense and maintenance of the Licensed Patents at their discretion and at their own cost. As from such notification, Oculis shall not be responsible for costs associated with such Licensed Patents, and, where such notification is provided following such time as Xxxxxx assumes responsible for performing patenting matters as set forth above, Oculis shall not be responsible for the preparation, filing, prosecution, protection and maintenance of the mentioned Licensed Patents and such Patent Rights shall cease to be Licensed Patents and the provisions of Agreement shall be of no further effect with respect to such patent and/or country of the Territory.

  • Supply Agreements For a period of three years from the consummation of the IPO, Odetics shall not unilaterally terminate or assign its guarantee obligation with respect to any supply agreement pursuant to which it has guaranteed the performance by ATL of ATL's obligations, unless such suppliers have consented to the termination or assignment of such guarantee.

  • End User License Agreement This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. xxxx://xxxxxxxxxxxxxxx.xxx/licenses/by-nc-nd/3.0/ You are free to: Share: to copy, distribute and transmit the work Under the following conditions: Attribution: You must attribute the work in the manner specified by the author (but not in any way that suggests that they endorse you or your use of the work).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!