Permitted Drawings Sample Clauses

Related to Permitted Drawings

• The Drawings The Drawings are the graphic and pictorial portions of the Contract Documents showing the design, location and dimensions of the Work, generally including plans, elevations, sections, details, schedules and diagrams.

• As-Built Drawings Within thirty (30) Days of the successful completion of the Acceptance Test, Seller shall provide for Company review a set of the proposed as‑built drawings for the Company-Owned Interconnection Facilities constructed by Seller (and/or its Contractors). Within thirty (30) Days of Company's receipt of the proposed as‑built drawings, Company shall provide Seller with either (i) its comments on the proposed as‑built drawings or (ii) notice of acceptance of the proposed as‑built drawings as final as‑built drawings. If Company provides comments on the proposed as‑built drawings, Seller shall incorporate such comments into a final set of as‑built drawings and provide such final as‑built drawings to Company within twenty (20) Days of Seller's receipt of Company's comments.

• Equipment Advances (i) Subject to and upon the terms and conditions of this Agreement, Bank agrees to make Equipment Advances to Borrower. Borrower may request Equipment Advances at any time during the Draw Period, provided that the initial Equipment Advance shall not exceed One Million Five Hundred Thousand Dollars ($1,500,000) (the “Initial Equipment Advance”). The aggregate outstanding amount of Equipment Advances shall not exceed the Equipment Line. Each Equipment Advance shall not exceed sixty percent (60%) of the invoice amount of equipment and software listed in that certain Machinery and Equipment 2013 Projection delivered to Bank on or about the Closing Date (which Borrower shall, in any case, have purchased, (i) with respect to the Initial Equipment Advance, within one hundred eighty (180) days and (ii) with respect to all subsequent Equipment Advances, within ninety (90) days, of the date of the corresponding Equipment Advance), excluding taxes, shipping, warranty charges, freight discounts and installation expense. Each Equipment Advance must be in an amount equal to the lesser of One Hundred Fifty Thousand Dollars ($150,000) or the amount that has not yet been drawn under the Equipment Line. (ii) Interest shall accrue from the date of each Equipment Advance at the rate specified in Section 2.3(a), and shall be payable in accordance with Section 2.3(c). Any Equipment Advances that are outstanding on June 30, 2013 shall be payable in twenty seven (27) equal monthly installments of principal, plus all accrued interest, beginning on July 1, 2013, and continuing on the same day of each month thereafter through the Equipment Maturity Date. Any Equipment Advances made by Bank after June 30, 2013 shall immediately amortize and be payable in equal monthly installments of principal, plus all accrued interest, beginning on the first (1st) day of the month immediately following such Equipment Advance and continuing on the same day of each month thereafter through the Equipment Maturity Date, at which time all amounts due in connection with the Equipment Advances made under this Section 2.1(b) shall be immediately due and payable. Equipment Advances, once repaid, may not be reborrowed. Except as set forth in the Pricing Addendum, Borrower may prepay the Equipment Advances prior to the Equipment Maturity Date, provided that on the date of such prepayment Borrower shall, (i) prepay all but not less than all of the Equipment Advances and (ii) in connection with such prepayment, pay to the Bank to the Prepayment Fee, if applicable. (iii) When Borrower desires to obtain an Equipment Advance, Borrower shall notify Bank (which notice shall be irrevocable) by facsimile transmission to be received no later than 3:00 p.m. Pacific time three (3) Business Days before the day on which the Equipment Advance is to be made. Such notice shall be substantially in the form of Exhibit C. The notice shall be signed by a Responsible Officer or its designee and include a copy of the invoice for any Equipment to be financed. Bank shall be entitled to rely on any facsimile notice given by a person who Bank reasonably believes to be a Responsible Officer or a designee thereof, and Borrower shall indemnify and hold Bank harmless for any damages or loss suffered by Bank as a result of such reliance.” 2. Section 2.1(c) of the Agreement hereby is amended and restated in its entirety to read as follows:

• Design and Drawings (i) Design and Drawings shall be developed in conformity with the Specifications and Standards set forth in Schedule-D. In the event, the Contractor requires any relaxation in design standards due to restricted Right of Way in any section, the alternative design criteria for such section shall be provided for review and approval of the Authority’s Engineer. (ii) The Contractor shall appoint a proof check consultant (the “Proof Consultant”) after proposing to the Authority a panel of three (3) names of qualified and experienced firms from whom the Authority may choose one (1) to be the Proof Consultant. Provided, however, that if the panel is not acceptable to the Authority and the reasons for the same are furnished to the Contractor, the Contractor shall propose to the Authority a revised panel of three (3) names from the firms empanelled as proof consultants by the [Ministry of Road Transport and Highways] for obtaining the consent of the Authority. The Contractor shall also obtain the consent of the Authority for two (2) key personnel of the Proof Consultant who shall have adequate experience and qualifications in highways and bridges respectively. The Authority shall, within 15 (fifteen) days of receiving a proposal from the Contractor hereunder, convey its decision, with reasons, to the Contractor, and if no such decision is conveyed within the said period, the Contractor may proceed with engaging of the Proof Consultant. (iii) The Proof Consultant shall: (a) evolve a systems approach with the Design Director so as to minimise the time required for final designs and construction drawings; and (b) proof check the detailed calculations, drawings and designs, which have been approved by the Design Director. (iv) In respect of the Contractor’s obligations with respect to the design and Drawings of the Project Highway as set forth in Schedule-I, the following shall apply: (a) The Contractor shall prepare and submit, with reasonable promptness and in such sequence as is consistent with the Project Completion Schedule, three (3) copies each of the design and Drawings, duly certified by the Proof Consultant, to the Authority’s Engineer for its approval. Provided, however, that in respect of Major Xxxxxxx and Structures, the Authority’s Engineer may require additional drawings for approval in accordance with Good Industry Practice. (b) by submitting the Drawings for review and approval to the Authority’s Engineer, the Contractor shall be deemed to have represented that it has determined and verified that the design and engineering, including field construction criteria related thereto, are in conformity with the Scope of the Project, the Specifications and Standards and the Applicable Laws; (c) within 15 (fifteen) days of the receipt of the Drawings, the Authority’s Engineer shall review the same and convey its approval/observations to the Contractor with particular reference to their conformity or otherwise with the Scope of the Project and the Specifications and Standards. Provided, however that in case of a major bridge or structure, the aforesaid period of 15 (fifteen) days may be extended up to 30 (thirty) days; (d) if the aforesaid observations of the Authority’s Engineer indicate that the Drawings are not in conformity with the Scope of the Project or the Specifications and Standards, such Drawings shall be revised by the Contractor in conformity with the provisions of this Agreement and resubmitted to the Authority’s Engineer for review and approval. The Authority’s Engineer shall give its observations, if any, within 10 (ten) days of receipt of the revised Drawings. In the event the Contractor fails to revise and resubmit such Drawings to the Authority’s Engineer for review/approval as aforesaid, the Authority’s Engineer may withhold the payment for the affected works in accordance with the provisions of Clause 19.5 (iv). If the Contractor disputes any decision, direction or determination of the Authority’s Engineer hereunder, the Dispute shall be resolved in accordance with the Dispute Resolution Procedure; (e) no review/approval and/or observation of the Authority’s Engineer and/or its failure to review/approval and/or convey its observations on any Drawings shall relieve the Contractor of its obligations and liabilities under this Agreement in any manner nor shall the Authority’s Engineer or the Authority be liable for the same in any manner; and if errors, omissions, ambiguities, inconsistencies, inadequacies or other Defects are found in the Drawings, they and the construction works shall be corrected at the Contractor's cost, notwithstanding any approval under this Article 10; (f) the Contractor shall be responsible for delays in submitting the Drawing as set forth in Schedule-I caused by reason of delays in surveys and field investigations, and shall not be entitled to seek any relief in that regard from the Authority; and (g) the Contractor warrants that its designers, including any third parties engaged by it, shall have the required experience and capability in accordance with Good Industry Practice and it shall indemnify the Authority against any damage, expense, liability, loss or claim, which the Authority might incur, sustain or be subject to arising from any breach of the Contractor’s design responsibility and/or warranty set out in this Clause. (h) the Contractor shall ensure that all the designs and drawings shall be approved from the Authority’s Engineer within 90 days (ninety) from the Appointed Date. (v) Any cost or delay in construction arising from review/approval by the Authority’s Engineer shall be borne by the Contractor. (vi) Works shall be executed in accordance with the Drawings provided by the Contractor in accordance with the provisions of this Clause 10.2 and the approval of the Authority’s Engineer thereon as communicated pursuant to the provisions of sub- Clause (c) & (d) of Clause 10.2 (iv). Such Drawings shall not be amended or altered without prior written notice to the Authority’s Engineer. If a Party becomes aware of an error or defect of a technical nature in the design or Drawings, that Party shall promptly give notice to the other Party of such error or defect. (vii) Within 90 (ninety) days of the Project Completion Date, the Contractor shall furnish to the Authority and the Authority’s Engineer a complete set of as- built Drawings, in 2 (two) hard copies and in micro film form or in such other medium as may be acceptable to the Authority, reflecting the Project Highway as actually designed, engineered and constructed, including an as-built survey illustrating the layout of the Project Highway and setback lines, if any, of the buildings and structures forming part of Project Facilities.

• Record Drawings A final set of drawings prepared by the Architect that incorporates all changes from all As- Builts, sketches, details, and clarifications.

• Term Advances The Borrower shall pay to the Administrative Agent for the ratable benefit of each Term Lender the aggregate outstanding principal amount of the Term Advances in quarterly installments each equal to $412,500 (which is equal to five percent (5%) of $8,250,000). Such quarterly installments shall be due and payable on each March 31st, June 30th, September 30th, and December 31st, commencing with December 31, 2012, and a final installment of the remaining, unpaid principal balance of the Term Advances payable on the Term Maturity Date.

• Agreement to Repay Letter of Credit Drawings (a) The Borrower agrees to reimburse each Issuing Lender, by making payment to the Administrative Agent in immediately available funds at the Payment Office, for any payment or disbursement made by such Issuing Lender under any Letter of Credit issued by it (each such amount, so paid until reimbursed by the Borrower, an “Unpaid Drawing”), not later than one Business Day following receipt by the Borrower of notice of such payment or disbursement (provided that no such notice shall be required to be given if a Default or an Event of Default under Section 11.05 shall have occurred and be continuing, in which case the Unpaid Drawing shall be due and payable immediately without presentment, demand, protest or notice of any kind (all of which are hereby waived by the Borrower)), with interest on the amount so paid or disbursed by such Issuing Lender, to the extent not reimbursed prior to 12:00 Noon (New York time) on the date of such payment or disbursement, from and including the date paid or disbursed to but excluding the date such Issuing Lender was reimbursed by the Borrower therefor at a rate per annum equal to the Base Rate as in effect from time to time plus the Applicable Margin as in effect from time to time for Revolving Loans that are maintained as Base Rate Loans; provided, however, to the extent such amounts are not reimbursed prior to 12:00 Noon (New York time) on the third Business Day following the receipt by the Borrower of notice of such payment or disbursement or following the occurrence of a Default or an Event of Default under Section 11.05, interest shall thereafter accrue on the amounts so paid or disbursed by such Issuing Lender (and until reimbursed by the Borrower) at a rate per annum equal to the Base Rate as in effect from time to time plus the Applicable Margin for Revolving Loans that are maintained as Base Rate Loans as in effect from time to time plus 2%, with such interest to be payable on demand. Each Issuing Lender shall give the Borrower prompt written notice of each Drawing under any Letter of Credit issued by it, provided that the failure to give any such notice shall in no way affect, impair or diminish the Borrower’s obligations hereunder. (b) The obligations of the Borrower under this Section 3.05 to reimburse each Issuing Lender with respect to drafts, demands and other presentations for payment under Letters of Credit issued by it (each, a “Drawing”) (including, in each case, interest thereon) shall be absolute and unconditional under any and all circumstances and irrespective of any setoff, counterclaim or defense to payment which the Borrower or any Subsidiary of the Borrower may have or have had against any Lender (including in its capacity as an Issuing Lender or as a Participant), including, without limitation, any defense based upon the failure of any drawing under a Letter of Credit to conform to the terms of the Letter of Credit or any nonapplication or misapplication by the beneficiary of the proceeds of such Drawing; provided, however, that the Borrower shall not be obligated to reimburse any Issuing Lender for any wrongful payment made by such Issuing Lender under a Letter of Credit issued by it as a result of acts or omissions constituting willful misconduct or gross negligence on the part of such Issuing Lender (as determined by a court of competent jurisdiction in a final and non-appealable decision).

• Term A Loans On the Effective Date, all outstanding "Loans" under the ------------ Existing Credit Agreement held by the Existing Lenders, shall automatically and without any action on the part of any Person, be designated as Term A Loans hereunder and each of the New Lenders that is a Term A Lender (and each Existing Lender, if any, whose relative proportion of Term A Commitments hereunder is increasing over the proportion of Existing Loans held by it under the Existing Credit Agreement) shall, by assignments from the Existing Lenders (which shall be deemed to occur automatically on the Effective Date), acquire a portion of the Term A Loans of the Existing Lenders so designated in such amounts (and the Term A Lenders shall, through the Administrative Agent, make such additional adjustments among themselves as shall be necessary) so that after giving effect to such assignments and adjustments, the Term A Lenders shall hold the Term A Loans hereunder ratably in accordance with their respective Term A Commitments. On the Effective Date all "Interest Periods" in respect of the "Loans" under the Existing Credit Agreement that are designated as Term A Loans hereunder shall automatically be terminated and, subject to the terms and conditions of this Agreement (including, without limitation, paragraph (d) below), the Borrowers shall be permitted to Continue such "Loans" as Eurodollar Loans or to Convert such "Loans" into Base Rate Loans hereunder, in each case as provided in Section 2.08 hereof. In addition to the foregoing, each Term A Lender severally agrees, on the terms and conditions of this Agreement, to make additional term loans to the Borrowers in Dollars on the Effective Date (provided that the same shall occur no later than the Term Loan Commitment Termination Date) in an aggregate principal amount up to but not exceeding the amount of the Term A Commitment of such Lender (such Loans, together with the "Loans" under the Existing Credit Agreement designated as Term Loans hereunder pursuant to the preceding paragraph, being herein called "Term A Loans"), provided that in no event shall ------------ -------- the aggregate principal amount of all Term A Loans exceed the aggregate amount of the Term A Commitments as in effect on the Effective Date. Subject to the terms and conditions of this Agreement, on the Effective Date the Borrowers may borrow the amount of the unutilized Term A Commitments by means of Base Rate Loans and Eurodollar Loans, and thereafter the Borrowers may Credit Agreement ---------------- Convert Term A Loans of one Type into Term A Loans of another Type (as provided in Section 2.08 hereof) or Continue Term A Loans of one Type as Term A Loans of the same Type (as provided in Section 2.08 hereof).

• Specific Obligations The HSP: will provide to the Funder, or to such other entity as the Funder may direct, in the form and within the time specified by the Funder, the Reports, other than personal health information as defined in the Enabling Legislation, that the Funder requires for the purposes of exercising its powers and duties under this Agreement, the Accountability Agreement, the Enabling Legislation or for the purposes that are prescribed under any Applicable Law; will fulfil the specific reporting requirements set out in Schedule B; will ensure that every Report is complete, accurate, signed on behalf of the HSP by an authorized signing officer where required and provided in a timely manner and in a form satisfactory to the Funder; agrees that every Report submitted to the Funder by or on behalf of the HSP, will be deemed to have been authorized by the HSP for submission. For certainty, nothing in this section 8.1 or in this Agreement restricts or otherwise limits the Funder’s right to access or to require access to personal health information as defined in the Enabling Legislation, in accordance with Applicable Law for purposes of carrying out the Funder’s statutory objects to achieve the purposes of the Enabling Legislation.

• Technical Specifications and Drawings a) The Goods and Related Services supplied under this Contract shall conform to the technical specifications and standards mentioned in Section VI, Schedule of Requirements and, when no applicable standard is mentioned, the standard shall be equivalent or superior to the official standards whose application is appropriate to the Goods' country of origin. b) The Supplier shall be entitled to disclaim responsibility for any design, data, drawing, specification or other document, or any modification thereof provided or designed by or on behalf of the Procuring Entity, by giving a notice of such disclaimer to the Procuring Entity. c) Wherever references are made in the Contract to codes and standards in accordance with which it shall be executed, the edition or the revised version of such codes and standards shall be those specified in the Schedule of Requirements. During Contract execution, any changes in any such codes and standards shall be applied only after approval by the Procuring Entity and shall be treated in accordance with GCC Clause 33.