Phasing Plan Required Sample Clauses

Phasing Plan Required. The Phasing Plan serves as a critical reference and 87 summarizes the overall development plan for the Plat. The Phasing Plan shall be 88 clearly depicted and mapped by the Developer. Review copies shall be provided 89 to the Village Board and staff, and the approved version of the Phasing Plan shall 90 be in recordable form and recorded as an exhibit to this Agreement. The Phasing 91 Plan shall identify the sequencing for the Development and provide a logical 92 progression for installation of Public Improvements. This logical progression shall 93 consider: engineering realities; sanitary sewer extensions; water supply and 94 pressure; stormwater facilities; connectivity of public roads for motor vehicles 95 within and outside of the Plat; connections of multi-use paths for bicyclists and 96 pedestrians; accessways and service needs for police, EMS, firefighters and public 97 safety; and other similar factors affecting public health, safety and welfare. The 98 Phasing Plan shall identify the current zoning and anticipated use of the private lots 99 within each Phase. The Phasing Plan shall identify the purpose(s) of the Outlots in 100 the Plat, and the Phase in which each Outlot shall be improved to satisfy that 101 purpose. The Phasing Plan shall include a reasonable timeline based on 102 Developer’s assessment of existing and projected marketing opportunities. 103 104 The Phasing Plan requires approval by the Village Board. The Village Board will 105 review the Phasing Plan presented by the Developer to determine whether, in the 106 reasonable discretion of the Village Board, the Phasing Plan satisfies the objectives 107 set forth in this section 1.2. 108 109 By approving this Agreement, the Village determines that the Phasing Plan attached 110 hereto as Exhibit 2, and incorporated by reference, satisfies the objectives set forth
AutoNDA by SimpleDocs

Related to Phasing Plan Required

  • CFR PART 200 Contract Provisions Explanation Required Federal contract provisions of Federal Regulations for Contracts for contracts with ESC Region 8 and TIPS Members: The following provisions are required to be in place and agreed if the procurement is funded in any part with federal funds. The ESC Region 8 and TIPS Members are the subgrantee or Subrecipient by definition. Most of the provisions are located in 2 CFR PART 200 - Appendix II to Part 200—Contract Provisions for Non-Federal Entity Contracts Under Federal Awards at 2 CFR PART 200. Others are included within 2 CFR part 200 et al. In addition to other provisions required by the Federal agency or non-Federal entity, all contracts made by the non- Federal entity under the Federal award must contain provisions covering the following, as applicable. Contracts for more than the simplified acquisition threshold currently set at $250,000, which is the inflation adjusted amount determined by the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) as authorized by 41 U.S.C. 1908, must address administrative, contractual, or legal remedies in instances where contractors violate or breach contract terms, and provide for such sanctions and penalties as appropriate. Notice: Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and TIPS Members reserves all rights and privileges under the applicable laws and regulations with respect to this procurement in the event of breach of contract by either party. Does vendor agree? Yes

  • Design Requirements The DG Facility shall be installed in compliance with Wisconsin Administrative Code Chapter PSC 119.

  • Construction Requirements (a) All Life and Safety and applicable Building Codes will be strictly enforced (i.e., tempered glass, fire dampers, exit signs, smoke detectors, alarms, etc.). Prior coordination with the Building Manager is required. (b) Electric panel schedules must be brought up to date identifying all new circuits added. (c) All electrical outlets and lighting circuits are to be properly identified. Outlets will be labeled on back side of each cover plate. (d) All electrical and phone closets being used must have panels replaced and doors shut at the end of each day’s work. Any electrical closet that is opened with the panel exposed must have a work person present. (e) All electricians, telephone personnel, etc. will, upon completion of their respective projects, pick up and discard their trash leaving the telephone and electrical rooms clean. If this is not complied with, a clean-up will be conducted by the building janitors and the general contractor will be back-charged for this service. (f) Welding or burning with an open flame will not be done without prior approval of the Building Manager. Fire extinguishers must be on hand at all times. (g) All “anchoring” of walls or supports to the concrete are not to be done during normal working hours (7:30 AM—6:00 PM, Monday through Friday). This work must be scheduled before or after these hours during the week or on the weekend. (h) All core drilling is not to be done during normal working hours (7:30 AM—6:00 PM, Monday through Friday). This work must be scheduled before or after these hours during the week or on the weekend. (i) All HVAC work must be inspected by the Building Engineer. The following procedures will be followed by the general contractor: i) A preliminary inspection of the HVAC work in progress will be scheduled through the Building Office prior to the reinstallation of the ceiling grid. ii) A second inspection of the HVAC operation will also be scheduled through the Building Office and will take place with the attendance of the HVAC contractor’s Air Balance Engineer. This inspection will take place when the suite in question is ready to be air-balanced. [***] = CONFIDENTIAL INFORMATION HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT TO THIS OMITTED INFORMATION. iii) The Building Engineer will inspect the construction on a periodic basis as well. (j) All existing thermostats, ceiling tiles, lighting fixtures and air conditioning grilles shall be saved and turned over to the Building Engineer.

  • Food Service Waste Reduction Requirements Contractor shall comply with the Food Service Waste Reduction Ordinance, as set forth in San Francisco Environment Code Chapter 16, including but not limited to the remedies for noncompliance provided therein.

  • Submission Requirements Requirement Deliverable (Report Name) Due Date Submission System

  • Prior Procedure Required No grievance shall be considered by the arbitrator which has not been first duly processed in accordance with the grievance procedure and appeal provisions.

  • Application Requirements This application shall contain, as a minimum, a sketch showing the location of proposed facilities; a description, sketch, manufacturer’s brochure, etc. of the proposed facilities; and a description of the operation proposed. (11-28-90) 101. -- 199. (RESERVED)‌ 200. OPERATIONAL AGREEMENT.‌‌

  • Director Notification Requirement If you are a director, associate director or shadow director of a Singapore company, you are subject to certain notification requirements under the Singapore Companies Act. Among these requirements, you must notify the Singapore subsidiary in writing within two business days of any of the following events: (i) you receive or dispose of an interest (e.g., RSUs or shares of Common Stock) in the Company or any subsidiary of the Company, (ii) any change in a previously-disclosed interest (e.g., forfeiture of RSUs and the sale of shares of Common Stock), or (iii) becoming a director, associate director or a shadow director if you hold such an interest at that time.

  • Compliance with Registration Requirements; No Stop Order; No Objection from NASD For the period from and after effectiveness of this Agreement and prior to the First Closing Date and, with respect to the Optional Common Shares, the Second Closing Date: (i) the Company shall have filed the Prospectus with the Commission (including the information required by Rule 430A under the Securities Act) in the manner and within the time period required by Rule 424(b) under the Securities Act; or the Company shall have filed a post-effective amendment to the Registration Statement containing the information required by such Rule 430A, and such post-effective amendment shall have become effective; or, if the Company elected to rely upon Rule 434 under the Securities Act and obtained the Representatives' consent thereto, the Company shall have filed a Term Sheet with the Commission in the manner and within the time period required by such Rule 424(b); (ii) no stop order suspending the effectiveness of the Registration Statement, any Rule 462(b) Registration Statement, or any post-effective amendment to the Registration Statement, shall be in effect and no proceedings for such purpose shall have been instituted or threatened by the Commission; and (iii) the NASD shall have raised no objection to the fairness and reasonableness of the underwriting terms and arrangements.

  • No Mitigation Required Executive shall not be required to mitigate the amount of any payment provided for under this Agreement by seeking other employment or in any other manner.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!