Process Stability and Capability Sample Clauses

Process Stability and Capability a. Identify the criteria for performing process capability studies and describe how and when these studies are applied. Describe how the process capability index is calculated and include the frequency of these calculations. Describe what actions are taken as a result of each process capability study. Describe the contractor's methodologies when process capability is for variable and attribute data. To determine a capable process, the process/operation parameters shall meet the following requirements: (1) Variable Data. Process capability (Cp) shall be determined. Process performance index shall be greater than or equal to 1.33 (Cpk). For critical parameters/characteristics, the process performance index shall be greater than or equal to 2.0 (Cpk). (2) Attribute Data: Process capability/performance shall be the percent beyond the upper/lower specification limit less than or equal to .003 percent (Cpk=1.33). b. Describe what actions will be taken if process/operation is sub-marginal or marginal. (Cpk less than 1.33 or 2.0 for criticals) or grand average fraction defective is greater than .003 percent). c. Include analysis of statistical distributions and define all formulas and symbology utilized.
AutoNDA by SimpleDocs
Process Stability and Capability a. Identify the criteria for performing process capability studies and describe how and when these studies are applied. Describe how the process capability index is calculated and include the frequency of these calculations. Describe what actions are taken as methodologies when process capability is for variable and attribute data. To determine a capable process, the process/operation parameters shall meet the following requirements: (1) Variable data: Process capability (Cp) shall be determined. Process performance index shall be greater than or equal to 1.33 (Cpk). For critical parameters/characteristics, the process performance index shall be greater than or equal to 2.0 (Cpk). (2) Attribute data: Process capability/performance shall be the percent beyond the upper/lower specification limit less than or equal to .003 percent (Cpk = 1.33). b. Describe what actions will be taken if process/operation is sub-marginal or marginal (Cpk less than 1.33 or 2.0 for criticals or grand average fraction defective is greater than .003 percent). c. Include analysis of statisical distributions and define all formulas and symbology utilized. CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE 9 OF 35 PIIN/SIIN W52P1J-05-C-0024 MOD/AMD NAME OF OFFEROR OR CONTRACTOR: VALENTEC SYSTEMS INC.
Process Stability and Capability. 3.7.2.1.7.1. Identify the criteria for performing process capability studies and describe how and when these studies are applied. Describe how the process capability index is calculated and include the frequency of these calculations. Describe what actions are taken as a result of each process capability study. Describe the contractor’s methodologies when process capability is for variable and attribute data. To determine a capable process, the process/operation parameters shall meet the following requirements: (1)Variable Data. Process capability (Cp) shall be determined. Process performance index shall be greater than or equal to

Related to Process Stability and Capability

  • Compatibility 1. Any unresolved issue arising from a mutual agreement procedure case otherwise within the scope of the arbitration process provided for in this Article and Articles 25A to 25G shall not be submitted to arbitration if the issue falls within the scope of a case with respect to which an arbitration panel or similar body has previously been set up in accordance with a bilateral or multilateral convention that provides for mandatory binding arbitration of unresolved issues arising from a mutual agreement procedure case. 2. Nothing in this Article and Articles 25A to 25G shall affect the fulfilment of wider obligations with respect to the arbitration of unresolved issues arising in the context of a mutual agreement procedure resulting from other conventions to which the Contracting States are or will become parties.”.

  • Technology Access Contractor expressly acknowledges that state funds may not be expended in connection with the purchase of an automated information system unless that system meets certain statutory requirements relating to accessibility by persons with visual impairments. Accordingly, Contractor represents and warrants to System Agency that the technology provided to System Agency for purchase (if applicable under this Contract or any related Solicitation) is capable, either by virtue of features included within the technology or because it is readily adaptable by use with other technology, of: • providing equivalent access for effective use by both visual and non-visual means; • presenting information, including prompts used for interactive communications, in formats intended for non-visual use; and • being integrated into networks for obtaining, retrieving, and disseminating information used by individuals who are not blind or visually impaired. For purposes of this Section, the phrase “equivalent access” means a substantially similar ability to communicate with or make use of the technology, either directly by features incorporated within the technology or by other reasonable means such as assistive devices or services which would constitute reasonable accommodations under the Americans With Disabilities Act or similar state or federal laws. Examples of methods by which equivalent access may be provided include, but are not limited to, keyboard alternatives to mouse commands and other means of navigating graphical displays, and customizable display appearance. In accordance with Section 2157.005 of the Texas Government Code, the Technology Access Clause contract provision remains in effect for any contract entered into before September 1, 2006.

  • Financial Viability and Regulatory Compliance 2.6.1 Contractor warrants and represents that its corporate entity is in good standing with all applicable federal, state, and local licensing authorities and that it possesses all requisite licenses to perform the services required by this contract. Contractor further warrants and represents that it owes no outstanding delinquent federal, state or local taxes or business assessments. 2.6.2 Contractor agrees to promptly disclose to the MPHA any IRS liens or licensure suspension or revocation that may adversely affect its capacity to perform the services outlined within this contract. The failure by Contractor to disclose such issue to the MPHA in writing within 5 days of such notification received will constitute a material breach of this contract. 2.6.3 Contractor further agrees to promptly disclose to the MPHA any change of more than 50% of its ownership and/or any declaration of bankruptcy that Contractor may undergo during the term(s) of this contract. The failure of Contractor to disclose any change of more than 50% of its ownership and/or its declaration of bankruptcy within 5 days of said actions shall constitute a material breach of this contract. 2.6.4 All disclosures made pursuant to this section of the contract shall be made in writing and submitted to MPHA within the time periods required herein.

  • Evaluation Software If the Software is an evaluation version or is provided to You for evaluation purposes, then, unless otherwise approved in writing by an authorized representative of Licensor, Your license to use the Software is limited solely for internal evaluation purposes in non-production use and in accordance with the terms of the evaluation offering under which You received the Software, and expires 90 days from installation (or such other period as may be indicated within the Software). Upon expiration of the evaluation period, You must discontinue use of the Software, return to an original state any actions performed by the Software, and delete the Software entirely from Your system and You may not download the Software again unless approved in writing by an authorized representative of Licensor. The Software may contain an automatic disabling mechanism that prevents its use after a certain period of time. RESTRICTIONS

  • Experience, Financial Capability and Suitability Subscriber is: (i) sophisticated in financial matters and is able to evaluate the risks and benefits of the investment in the Shares and (ii) able to bear the economic risk of its investment in the Shares for an indefinite period of time because the Shares have not been registered under the Securities Act (as defined below) and therefore cannot be sold unless subsequently registered under the Securities Act or an exemption from such registration is available. Subscriber is capable of evaluating the merits and risks of its investment in the Company and has the capacity to protect its own interests. Subscriber must bear the economic risk of this investment until the Shares are sold pursuant to: (i) an effective registration statement under the Securities Act or (ii) an exemption from registration available with respect to such sale. Subscriber is able to bear the economic risks of an investment in the Shares and to afford a complete loss of Subscriber’s investment in the Shares.

  • Registry Interoperability and Continuity Registry Operator shall comply with the Registry Interoperability and Continuity Specifications as set forth in Specification 6 attached hereto (“Specification 6”).

  • Industry Troubleshooter Where a difference arises between the parties relating to the dismissal, discipline, or suspension of an employee, or to the interpretation, application, operation, or alleged violation of this Agreement, including any question as to whether a matter is arbitrable, during the term of the Collective Agreement, Xxxxx XxXxxxxxxx, Xxxx Xxxxxx, Xxxxx Xxxxxxxx, or a substitute agreed to by the parties, shall at the request of either party:

  • Information Technology Enterprise Architecture Requirements If this Contract involves information technology-related products or services, the Contractor agrees that all such products or services are compatible with any of the technology standards found at xxxxx://xxx.xx.xxx/iot/2394.htm that are applicable, including the assistive technology standard. The State may terminate this Contract for default if the terms of this paragraph are breached.

  • Interoperability To the extent required by applicable law, Cisco shall provide You with the interface information needed to achieve interoperability between the Software and another independently created program. Cisco will provide this interface information at Your written request after you pay Cisco’s licensing fees (if any). You will keep this information in strict confidence and strictly follow any applicable terms and conditions upon which Cisco makes such information available.

  • Architecture The Private Improvements shall have architectural features, detailing, and design elements in accordance with the Project Schematic Drawings. All accessory screening walls or fences, if necessary, shall use similar primary material, color, and detailing as on the Private Improvements.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!