Processing of Seafood Sample Clauses

Processing of Seafood. There are limited natural fishery resources in the Ukraine. However, this is not a limiting factor in developing a substantial value added seafood processing industry in Ukraine. On the contrary, the strategically important Port of Odessa could serve as one of the most important hubs for seafood processing in Eastern Europe. Many countries import raw materials for value-added food processing and are quite successful. For example, the US depends heavily upon importation of seafood raw materials (60% of all seafood products consumed in the US are imported) for its significant seafood processing industry. Odessa has historically served the former Soviet Union as a focal point for seafood processing and the adequate processing facilities are still in place. The facility is capable of freezing, smoking and canning fish or fishery products. The facility is large but has deteriorated from neglect over the last ten years. Nearly all facilities visited were operating at only a fraction of their production capabilities, as was mentioned in the previous section on Cold Chain. The greatest limiting factor, and our greatest challenge, will be attracting investment capital. An examination of Odessa’s port storage facilities is encouraging. The Port allows excellent facilities for the import of raw materials and access to nearby processing plants. In addition, the port will facilitate export of finished products. On-going renovations show improved freezer and cold storage on the docks. There was a multi-story frozen warehouse storage capable of storing substantial product. Moldova has no access to a seaport and is, consequently, greatly limited in export capability. There is aquaculture potential for establishment of landlocked seafood processing. This processing needs to focus primarily on the freshwater species capable of pond culture. Of particular significance is pond culture of paddlefish, carp and perhaps trout. Xx. Xxxxx believes that the potential for catfish culture is limited. Like Ukraine, most processing facilities were not in operation at the assessment team’s visit but the infrastructure seems to be in place. Overall equipment appears to be well maintained but underutilized.
Sample 1
AutoNDA by SimpleDocs

Related to Processing of Seafood

  • Processing of a Grievance It is recognized and accepted by the Union and the Employer that the processing of grievances as hereinafter provided is limited by the job duties and responsibilities of the employees and shall therefore be accomplished during normal working hours only when consistent with such employee duties and responsibilities. The aggrieved employee and a Union representative shall be allowed a reasonable amount of time without loss of pay when a grievance is investigated and presented to the Employer during normal working hours provided that the employee and the Union representative have notified and received the approval of the designated supervisor who has determined that such absence is reasonable and would not be detrimental to the work programs of the Employer.

  • RUNNING OF THE ACADEMY Teachers and staff

  • Reporting of Sales to TIPS by Vendor The Participation Fee that was published as part of the Solicitation and the fee published is the legally effective fee, along with any fee conditions stated in the Solicitation. Collection of the fees by TIPS is required under Texas Government Code §791.011 Et seq. Fees are due on all TIPS purchases reported by either Vendor or Member. Fees are due to TIPS upon payment by the Member to the Vendor, Reseller or Vendor Assigned Dealer. Vendor, Reseller or Vendor Assigned Dealer agrees that the participation fee is due to TIPS for all Agreement sales immediately upon receipt of payment including partial payment, from the Member Entity and must be paid to TIPS at least on a monthly basis, specifically within 31 calendar days of receipt of payment, if not more frequently, or as otherwise agreed by TIPS in writing and signed by an authorized signatory of TIPS. Thus, when an awarded Vendor, Reseller or Vendor Assigned Dealer receives any amount of payment, even partial payment, for a TIPS sale, the legally effective fee for that amount is immediately due to TIPS from the Vendor and fees due to TIPS should be paid at least on a monthly basis, specifically within 31 calendar days of receipt of payment, if not more frequently. Vendor is required to report all sales under the TIPS contract to TIPS. When a public entity initiates a purchase with a TIPS Awarded Vendor, if the Member inquires verbally or in writing whether the Vendor holds a TIPS Contract, it is the duty of the Vendor to verify whether or not the Member is seeking a TIPS purchase. Once verified, the Vendor must include the TIPS Contract number on any communications and related sales documents exchanged with the TIPS Member entity. To report sales, the Vendor must login to the TIPS Vendor Portal online at xxxxx://xxx.xxxx-xxx.xxx/vendors_form.cfm and click on the PO’s and Payments tab. Pages 3-7 of the Vendor Portal User Guide will walk you through the process of reporting sales to TIPS. Please refer to the TIPS Accounting FAQ’s for more information about reporting sales and if you have further questions, contact the Accounting Team at xxxxxxxxxx@xxxx-xxx.xxx. The Vendor or vendor assigned dealers are responsible for keeping record of all sales that go through the TIPS Agreement and submitting same to TIPS. Failure to render the participation fee to TIPS shall constitute a breach of this agreement with our parent governmental entity, Texas Education Service Center Region 8, as established by the Texas legislature and shall be grounds for termination of this agreement and any other agreement held with TIPS and possible legal action. Any overpayment of participation fees to TIPS by a Vendor will be refunded to the Vendor within ninety (90) days of receipt of notification if TIPS receives written notification of the overpayment not later than the expiration of six (6) months from the date of overpayment and TIPS determines that the amount was not legally due to TIPS pursuant to this agreement and applicable law. It is the Vendor’s responsibility to identify which sales are TIPS Agreement sales and pay the correct participation fee due for TIPS Agreement sales. Any notification of overpayment received by TIPS after the expiration of six (6) months from the date of overpayment will be non-refundable. Region 8 ESC and TIPS reserve the right to extend the six (6) month deadline to notify if approved by the Region 8 ESC Board of Directors. TIPS reserves all rights under the law to collect the fees due. Please contact TIPS at xxxx@xxxx-xxx.xxx or call (000) 000-0000 if you have questions about paying fees.

  • Incidental Services 13.1 The supplier may be required to provide any or all of the following services, including additional services (if any) specified in the SCC: (a) performance or supervision of on-site assembly, and/or commissioning of the supplied goods; (b) furnishing of tools required for the assembly and/or maintenance of the supplied goods; (c) furnishing of a detailed operations and maintenance manual for each appropriate unit of the supplied goods; (d) performance or supervision or maintenance and/or repair of the supplied goods, for a period of time agreed by the parties, provided that this service shall not relieve the supplier of any warranty obligations under this contract; and (e) training of the purchaser’s personnel, at the supplier’s plant and/or on-site, in assembly, start-up, operation, maintenance, and/or repair of the supplied goods. 13.2 Prices charged by the supplier for incidental services, if not included in the contract price for the goods, shall be agreed upon in advance by the parties and shall not exceed the prevailing rates charged to other parties by the supplier for similar services.

  • Processing of Customer Personal Data 3.1 UKG will: 3.1.1 comply with all applicable Data Protection Laws in the Processing of Customer Personal Data; and 3.1.2 not Process Customer Personal Data other than for the purpose, and in accordance with, the relevant Customer’s instructions as documented in the Agreement and this DPA, unless Processing is required by the Data Protection Laws to which the relevant UKG Processor is subject, in which case UKG to the extent permitted by the Data Protection Laws, will inform Customer of that legal requirement before the Processing of that Customer Personal Data. 3.2 Customer hereby: 3.2.1 instructs UKG (and authorizes UKG to instruct each Subprocessor) to: (a) Process Customer Personal Data; and (b) in particular, transfer Customer Personal Data to any country or territory subject to the provisions of this DPA, in each case as reasonably necessary for the provision of the Services and consistent with the Agreement. 3.2.2 warrants and represents that it is and will at all relevant times remain duly and effectively authorized to give the instructions set out in Section 3.2.1 on behalf of each relevant Customer Affiliate; and 3.2.3 warrants and represents that it has all necessary rights in relation to the Customer Personal Data and/or has collected all necessary consents from Data Subjects to Process Customer Personal Data to the extent required by Applicable Law. 3.3 Schedule 1 to this DPA sets out certain information regarding UKG’s Processing of Customer Personal Data as required by Article 28(3) of the GDPR (and equivalent requirements of other Data Protection Laws).

  • Transmission and Routing of Telephone Exchange Service Traffic 50.4.1 The Appendix Reciprocal Compensation, which is/are attached hereto and incorporated herein by reference, prescribe traffic routing parameters for Local Interconnection Trunk Group(s) the Parties shall establish over the Interconnections specified in the Appendix ITR, which is/are attached hereto and incorporated herein by reference.

  • Usage for Voice Mail Message Service Rated Incollects (originated in BellSouth and from other companies) can also be on Optional Daily Usage File. Rated Incollects will be intermingled with BellSouth recorded rated and unrated usage. Rated Incollects will not be packed separately.

  • Posting of Seniority List The Administration shall post the seniority list twice annually by October 1 and March 1 of each work year. The seniority list shall be posted on the designated bulletin board in each building/work site and will indicate, by area of certification, license, or entry-level requirement, the first day worked, the date of Board resolution to hire, and the contract status (limited or continuing) of each employee. Said list shall be provided by the Superintendent to the Association President on or before the date of posting. A. The name of employees on the seniority list shall appear in seniority rank order within areas of certification, license, or entry-level requirements, with the name of the most senior employee appearing at the top of the listing and the name of the least senior employee appearing at the bottom of the listing. B. The names of employees who are certificated, licensed, or otherwise minimally qualified in more than one (1) area shall be included on the listing for all areas of certification, license, or entry-level requirement. C. The names of part-time employees shall appear on the seniority list but shall be listed separately from the names of full-time employees.

  • Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.

  • Marketing of Production Except for contracts listed and in effect on the date hereof on Schedule 7.19, and thereafter either disclosed in writing to the Administrative Agent or included in the most recently delivered Reserve Report (with respect to all of which contracts the Borrower represents that it or its Subsidiaries are receiving a price for all production sold thereunder which is computed substantially in accordance with the terms of the relevant contract and are not having deliveries curtailed substantially below the subject Property’s delivery capacity), no material agreements exist which are not cancelable on 60 days notice or less without penalty or detriment for the sale of production from the Borrower’s or its Subsidiaries’ Hydrocarbons (including, without limitation, calls on or other rights to purchase, production, whether or not the same are currently being exercised) that (a) pertain to the sale of production at a fixed price and (b) have a maturity or expiry date of longer than six (6) months from the date hereof.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!