PURCHASE PRICE & TERMS The Buyer agrees to purchase the Property by payment of US Dollars ($ ) as follows: (check one) ☐ - All Cash Offer. No loan or financing of any kind is required in order to purchase the Property. Buyer shall provide Seller written third (3rd) party documentation verifying sufficient funds to close no later than , 20 , at : ☐ AM ☐ PM. Seller shall have three (3) business days after the receipt of such documentation to notify Buyer, in writing, if the verification of funds is not acceptable. If Buyer fails to provide such documentation, or if Seller finds such verification of funds is not acceptable, Seller may terminate this Agreement. Failure of Seller to provide Buyer written notice of objection to such verification shall be considered acceptance of verification of funds.
Supply Price The Initial Term “Supply Price” for the “Monthly Fixed Price Volume” set forth on Exhibit A shall be $[______]/MWh for the first [***] years of the Initial Term, and thereafter shall be the then-current market price as mutually agreed by Customer and Supplier prior to the end of the [***] year. The Extension Term Supply Price, if any, will be the then-current market price as mutually agreed by Customer and Supplier prior to entering into the Extension Term. Supplier and Customer may agree to fix the Supply Price for one or more periods during the Term that individually and in total are shorter than the full Term. Exhibit A sets forth the hourly delivery volume for which the Energy Price will be fixed during each month of the Term to take into account the phase-in of the facility which is expected to progress at a rate of approximately [***]MW per month (the “Monthly Fixed Price Volume”). Supplier represents that Supplier has used commercially reasonable efforts to set such Supply Price at approximately [***]% discount to the forward price at which Supplier xxxxxx its delivery obligations under this Transaction Confirmation with respect to any financial or physical energy supply arrangement intended to cover the Monthly Fixed Price Volume, the settlement index (ERCOT North Load Zone), and this Transaction Confirmation term. The [***]% discount shall be revised to take into account any physical or software limitations originating from Customer and limiting Supplier’s ability to curtail 100% of the load at the Data Center. Exhibit A also sets forth the minimum load that Customer has designated as not subject to economic curtailment (“Non-Curtailable Load”), which represents, among other things, the Motor Control Center (MCC), and other essential server and administrative load. Customer and Supplier can, in the context of the immediately preceding sentence, agree on a lesser than [***]% discount with respect to the Supply Price to account for Supplier’s incremental cost of providing a fixed Supply Price for Non-Curtailable Load.
Price Schedule, Payment Terms and Billing, and Price Adjustments (a) Price Schedule: Price Schedule under this Contract is set forth in Exhibit B.
Purchase Price and Closing Subject to the terms and conditions hereof, the Company agrees to issue and sell to the Purchasers and, in consideration of and in express reliance upon the representations, warranties, covenants, terms and conditions of this Agreement, the Purchasers, severally but not jointly, agree to purchase the Units for an aggregate purchase price of up to $10,000,000 (the “Offering Amount”), at a per Unit purchase price of $4.00 per Unit (the “Purchase Price”). The closing of the purchase and sale of the Units to be acquired by the Purchasers from the Company under this Agreement shall take place at the offices of Xxxxxx & Jaclin, LLP, 000 Xxxxx 0 Xxxxx, Xxxxx 000, Xxxxxxxxx, XX 00000 (the “Closing”). Subject to the terms and conditions set forth in this Agreement, the date and time of the Closing shall be the Closing Date (or such later date as is mutually agreed to by the Company and Newbridge Securities Corporation (the “Placement Agent”)), provided, that all of the conditions set forth in Article IV hereof and applicable to the Closing shall have been fulfilled or waived in accordance herewith (the “Closing Date”). Subject to the terms and conditions of this Agreement, at the Closing the Company shall deliver or cause to be delivered to each Purchaser (x) a certificate for the number of Preferred Shares set forth opposite the name of such Purchaser on Exhibit A hereto, (y) its Warrants to purchase such number of shares of Common Stock as is set forth opposite the name of such Purchaser on Exhibit A attached hereto and (z) any other documents required to be delivered pursuant to Article IV hereof. At the Closing, each Purchaser shall deliver its Purchase Price by wire transfer to the escrow account pursuant to the Escrow General Agreement (as hereafter defined).
Purchase Price and Payment Terms The aggregate purchase price (the “Purchase Price”) shall be Ninety One Million Dollars ($91,000,000), subject to adjustment as provided in Section 1.3 and Section 1.7. Of the Purchase Price, Six Million Nine Hundred Thousand Dollars ($6,900,000) shall be paid by Purchaser’s delivery of 150,000 shares of the common stock, par value $0.001 per share, of Purchaser’s Parent, which shares (the “Purchaser’s Parent Equity”) are valued at Six Million Nine Hundred Thousand Dollars ($6,900,000) (the “Purchaser’s Parent Equity Value”) based upon the price paid by others for similar shares contemporaneously with the Closing. At the Closing, Purchaser shall deliver to Sellers an amount in cash equal to the Purchase Price, minus (i) the Escrow Funds, minus (ii) the aggregate amount of Debt of the Company and its Subsidiaries (disregarding any intercompany Debt) outstanding as of the Closing Date (including any interest, penalties, charges or other fees accrued thereon), minus (iii) Sellers’ Transaction Expenses, minus (iv) the Purchaser’s Parent Equity Value, minus (v) the Off-Balance-Sheet LC Adjustment Amount, all as set forth in the funds flow memorandum attached hereto as Schedule 1.2 (the “Funds Flow Memorandum”) (such amount, the “Closing Cash”). At the Closing, Purchaser shall deliver (w) the Closing Cash by wire transfer of immediately available funds to an account identified by Frost as set forth in the Funds Flow Memorandum, (x) copies of the certificates representing the Purchaser’s Parent Equity to Sellers, (y) the Escrow Funds to the Escrow Agent as contemplated by Section 1.5 below, and (z) to the Company’s lenders and the persons entitled thereto (as shown on the Funds Flow Memorandum) all amounts of the Debt and Sellers’ Transaction Expenses subtracted to determine the Closing Cash. At the Closing, Sellers shall pay and satisfy in full the Excluded Liability set forth in clause (d) of Schedule 1.4.
Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.
The Purchase Price If the sale of the Property is not subject to HST, Seller agrees to certify on or before (included in/in addition to) closing, that the sale of the Property is not subject to HST. Any HST on chattels, if applicable, is not included in the Purchase Price.
Price Adjustments for OGS Centralized Contracts Periodic price adjustments will occur no more than twice per year on a schedule to be established solely by OGS. Pricing offered shall be fixed for the first twelve (12) months of the Contract term. Such price increases will only apply to the OGS Centralized Contracts and shall not be applied retroactively to Authorized User Agreements or any Mini-bids already submitted to an Authorized User. Price decreases may be made at any time. Additionally, some price decreases shall be calculated in accordance with Appendix B, section 17, Pricing.
THE PURCHASER AND PAYMENT OF PURCHASE PRICE 8.1 Immediately after the fall of the hammer and upon being declared the successful purchaser of the Property, the Purchaser shall execute the memorandum attached hereto (`the Memorandum’).
8.2 The signed Memorandum together with these conditions of sale and the Proclamation of Sale shall in their entirety form the contract for the sale and purchase of the Property (`the Contract of Sale’).
8.3 The last bid which is the highest bid accepted by the Auctioneer and upon which the Property is sold to the Purchaser shall be the purchase price for the Property (`the Purchase Price’).
8.4 Upon successful bid of the property by the bidder, the Bidding Deposit deposited by the bidder pursuant to clause 3.1 shall be paid to the Bank immediately upon execution of the Contract of Sale (“ the Purchase Deposit)
8.5 In the event that the Purchase Price is higher than the Reserve Price, the Purchaser shall immediately deposit with the Auctioneer as stakeholder a sum equivalent to the difference between Purchase Deposit and the Bidding Deposit (`the Purchase Deposit Shortfall’) either in cash or by way of a valid bank draft or cashier’s order drawn in favour of the Bank which together will form the Purchase Deposit.
8.6 The Auctioneer shall upon receipt of the Purchase Deposit release the said sum, bank draft and/or cashier’s order to the Bank.
8.7 In the event that the Purchaser shall fail to deposit the Purchase Deposit Shortfall or shall fail to execute the Memorandum for any reason whatsoever or in the event of the bank draft and/or cashier’s order for the Bidding Deposit and/or the Purchase Deposit Shortfall is dishonored for any reason whatsoever when presented by the Bank for payment, the Purchaser shall be deemed to have committed a breach of the terms of the Auction Sale and the consequences set out in paragraph 8.8 hereto shall ensue.
8.8 In the event that the Purchaser shall commit a breach, the Bidding Deposit shall be forfeited absolutely to the Bank and the Bank may in its absolute discretion upon such terms and conditions and at such time or times the Bank deems fit put the Property up for resale. The Bank shall be further entitled to recover from the Purchaser all costs and expenses of, in connection with and resulting from such resale. The Purchaser shall be further liable to the Bank for any shortfall in the sale price obtained at the resale and the Purchase Price (`the Resale Shortfall’). A certificate duly signed by an authorized officer of the Bank as to amount of the Resale Shortfall and the costs and expenses of, in connection with resulting from such resale shall be accepted by the Purchaser as binding correct and conclusive for all purposes including for legal proceedings. The certified amount shall be paid by the Purchaser to the Bank not later than seven (7) days from the date of the demand made by the Bank.
8.9 Notwithstanding anything herein contained, the amount representing the difference between the Purchase Price and the Purchase Deposit (“Balance Purchase Price”) shall be paid by the Purchaser directly to the Bank without any set-off not later than NINETY (90) DAYS from the date of the Contract of Sale (`the Due Date’).
8.10 The Balance Purchase Price shall be paid to the Bank by way of bank draft or cashier’s order drawn in favour of the Bank or E-Payment or any mode of payment which acceptable by the Bank.
8.11 Upon the written request by the Purchaser before the expiry date, the Bank in its absolute discretion may but shall be under no obligation to extend the Due Date for such period or periods the Bank deems fit (`the Extended Due Date’).
8.12 The Purchaser shall have prior to twenty one (21) days of the Due Date, the Purchaser shall issue a written request to the Assignee/Bank applying for an extension of time and the Bank may in it’s absolute discretion (i) agree to grant the extension of time unconditionally, or (ii) refuse the request, in which case the 10% of the successful bid shall be forfeited, or (iii) agree to grant an extension of time subject to conditions (including but not limited to imposition of late payment interest/charges/compensation at such rate/amount as the Bank shall determine) without assigning any reasons whatsoever and such decision shall be binding on the Purchaser. The interest on late payment if imposed by the Bank may be in the form of advance payment of interest for the extension period or otherwise is final and not refundable.
8.13 In the event that the Purchaser for any reason whatsoever (save and except where it is due to the default of the Bank) fails to pay the Balance Purchase Price by the Due Date or the Extended Due Date, as the case may be, the Purchaser shall be deemed to be in breach of the Contract of Sale, and all monies paid to the Bank upon the execution of the Contract of Sale including the Purchase Deposit shall be forfeited absolutely by the Bank and the consequences as set out in paragraph 8.8 shall ensue.
Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.
