Common use of Project Sign Clause in Contracts

Project Sign. The Contractor shall furnish, erect, maintain and remove a project sign at a location to be designated by the Project Manager. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS The project signboards shall be 3/4" thick, "AC" exterior grade fir plywood, 4 feet in height and 7 feet long. All lettering type and size and color selection shall be as specified by DHHL. All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Xxxxxx-X'Xxxxx, Xxxxxxx, Pittsburg, Sherwin-Williams, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's directions. Signs shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor and approved by the DHHL. The Project Signs shall be erected at locations directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The signs shall be maintained in good condition, throughout the progress of the work until final completion of the respective portions of the project. The project signs shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project signs shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHL. Payment will be made for the number of signs indicated in the proposal, painted, with lettering specified by DHHL, in place complete (see enclosed details) and payment for sign removal shall be incidental to these items.

Project Sign. The Contractor shall furnish, erect, maintain and remove a one project sign at a location to be designated by the Project Managersign. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS The project signboards signboard shall be 3/4" 3/4 inch thick, "“AC" ” exterior grade fir plywood, 4 feet in height and 7 feet longlong each. All lettering type and size and color selection shall be as specified by DHHLDHHL (refer to Exhibit 1). All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Boy Xxxxxx-X'XxxxxX’Xxxxx, Xxxxxxx, Pittsburg, Sherwin-Williams, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's ’s directions. Signs shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor and approved by the DHHL. The Project Signs Sign shall be erected at locations a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The signs sign shall be maintained in good condition, condition throughout the progress of the work until final completion of the respective portions of the project. The project signs sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project signs sign shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHL. Payment will be made for the number of signs indicated in the proposal, one project sign painted, with lettering specified by DHHL, in place complete (see enclosed details) and payment complete. Payment for sign removal shall be incidental to these items.said item. EXHIBIT 1 (SC-35: PROJECT SIGN) PROJECT SIGN SPECIFICATIONS LETTER STYLE COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. ART WORK CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. TITLES THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—2” STRIPE. MATERIALS PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. PAINT AND INKS SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED)

Project Sign. The Contractor CONTRACTOR shall furnish, erect, maintain and remove a one project sign at a location to be designated by the Project Managerfor each job site. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS The project signboards signboard shall be 3/4" 3/4 inch thick, "“AC" ” exterior grade fir plywood, 4 feet in height and 7 feet longlong each. All lettering type and size and color selection shall be as specified by DHHLDHHL (refer to Exhibit “A”). All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Boy Xxxxxx-X'XxxxxX’Xxxxx, Xxxxxxx, Pittsburg, Sherwin-—Williams, XxxxxxxxSinclair, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's ’s directions. Signs shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor CONTRACTOR and approved by the DHHL. The Project Signs Sign shall be erected at locations a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The signs sign shall be maintained in good condition, condition throughout the progress of the work until final completion of the respective portions of the project. The project signs sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project signs sign shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHLCONTRACTOR. Payment will be made for the number of signs indicated in the proposal, one project sign painted, with lettering specified by DHHL, in place complete (see enclosed details) and payment attachment). Payment for sign removal shall be incidental to these items.said item. Attachment – X0 XXXXX XX XXXXXX SPECIAL CONDITIONS EXHIBIT “A” (SC-26: PROJECT SIGN) PROJECT SIGN SPECIFICATIONS LETTER STYLE COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. ART WORK CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. TITLES THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—2” STRIPE. MATERIALS PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. PAINT AND INKS SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED)

Project Sign. The Contractor shall furnish, erect, maintain and remove a (2) project signs. One (1) sign at a location shall be based on the State of Hawaii standards, and one (1) sign shall follow the USDA template as shown on page 24 of this document. The State of Hawaii sign shall adhere to be designated by the Project Managerdetails and specifications as follows. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS The project signboards signboard shall be 3/4" ¾” thick, "“AC" ” exterior grade fir plywood, 4 feet in height and in 7 feet long. All lettering type and size and color selection shall be as specified by DHHLbelow. All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Xxxxxx-X'XxxxxX’Xxxxx, Xxxxxxx, Pittsburg, Sherwin-Williams, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's ’s directions. Signs Sign shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor and approved by the DHHL. The Project Signs Sign shall be erected at locations a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signssign. The signs sign shall be maintained in good condition, condition throughout the progress of the work until final completion of the respective portions of the project. The project signs sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project signs sign shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHL. Payment will be made for the number of signs indicated in the proposal, one (1) project sign painted, with lettering specified by DHHL, in place complete (see enclosed details) and payment complete. Payment for sign removal shall be incidental to these items.said item. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS PROJECT SIGN SPECIFICATIONS LETTER STYLE COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. ART WORK CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. TITLES THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’— 2” STRIPE. MATERIALS PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. PAINT AND INKS SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR:

Project Sign. The Contractor shall furnish, erect, maintain and remove a one project sign at a location to be designated by the Project Managerfor each job site. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS The project signboards signboard shall be 3/4" 3/4 inch thick, "“AC" ” exterior grade fir plywood, 4 feet in height and 7 feet longlong each. All lettering type and size and color selection shall be as specified by DHHLDHHL (refer to Exhibit “A”). All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Boy Xxxxxx-X'XxxxxX’Xxxxx, Xxxxxxx, Pittsburg, Sherwin-—Williams, XxxxxxxxSinclair, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's ’s directions. Signs shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor and approved by the DHHL. The Project Signs Sign shall be erected at locations a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The signs sign shall be maintained in good condition, condition throughout the progress of the work until final completion of the respective portions of the project. The project signs sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project signs sign shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHL. Payment will be made for the number of signs indicated in the proposal, one project sign painted, with lettering specified by DHHL, in Attachment – X0 XXXXX XX XXXXXX SPECIAL CONDITIONS place complete (see enclosed details) and payment attachment). Payment for sign removal shall be incidental to these items.said item. Attachment – X0 XXXXX XX XXXXXX SPECIAL CONDITIONS

Project Sign. The Contractor shall furnish, erect, maintain and remove a project sign at a location to be designated by the Project Manager. Attachment – S5 STATE OF HAWAII X0 XXXXX XX XXXXXX SPECIAL CONDITIONS The project signboards shall be 3/4" thick, "AC" exterior grade fir plywood, 4 feet in height and 7 feet long. All lettering type and size and color selection shall be as specified by DHHL. All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Xxxxxx-X'Xxxxx, Xxxxxxx, Pittsburg, Sherwin-Williams, XxxxxxxxSinclair, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's directions. Signs shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor and approved by the DHHL. The Project Signs shall be erected at locations directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The signs shall be maintained in good condition, throughout the progress of the work until final completion of the respective portions of the project. The project signs shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project signs shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHL. Payment will be made for the number of signs indicated in the proposal, painted, with lettering specified by DHHL, in place complete (see enclosed details) and payment for sign removal shall be incidental to these items.

Project Sign. The Contractor CONTRACTOR shall furnish, erect, maintain and remove a one project sign at a location to be designated by the Project Managersign. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS The project signboards signboard shall be 3/4" 3/4 inch thick, "“AC" ” exterior grade fir plywood, 4 feet in height and 7 feet longlong each. All lettering type and size and color selection shall be as specified by DHHLDHHL (refer to Exhibit A). All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Boy Xxxxxx-X'XxxxxX’Xxxxx, Xxxxxxx, Pittsburg, Sherwin-Williams—Xxxxxxxx, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's ’s directions. Signs shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor CONTRACTOR and approved by the DHHL. The Project Signs Sign shall be erected at locations a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The signs sign shall be maintained in good condition, condition throughout the progress of the work until final completion of the respective portions of the project. The project signs sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project signs sign shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHLCONTRACTOR. Payment will be made for the number of signs indicated in the proposal, one project sign painted, with lettering specified by DHHL, in place complete (see enclosed details) and payment attachment). Payment for sign removal shall be incidental to these items.said item. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS EXHIBIT “A” (SC-32: PROJECT SIGN) PROJECT SIGN SPECIFICATIONS LETTER STYLE COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. ART WORK CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. TITLES THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—2” STRIPE. MATERIALS PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. PAINT AND INKS SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED)

Project Sign. The Contractor shall furnish, erect, maintain and remove a (2) project signs. One (1) sign at a location shall be based on the State of Hawaii standards, and one (1) sign shall follow the USDA template as shown on page 24 of this document. The State of Hawaii sign shall adhere to be designated by the Project Managerdetails and specifications as follows. Attachment – S5 STATE OF HAWAII SPECIAL CONDITIONS The project signboards signboard shall be 3/4" ¾” thick, "“AC" ” exterior grade fir plywood, 4 feet in height and in 7 feet long. All lettering type and size and color selection shall be as specified by DHHLbelow. All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy, Xxxxxx-X'XxxxxX’Xxxxx, Xxxxxxx, Pittsburg, Sherwin-Williams, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer's ’s directions. Signs Sign shall be painted with one prime coat and two finish coats. For bidding purposes only, a sample of the project sign is attached to these special provisions. Final layout shall be based upon sign plans submitted by the Contractor and approved by the DHHL. The Project Signs Sign shall be erected at locations a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signssign. The signs sign shall be maintained in good condition, condition throughout the progress of the work until final completion of the respective portions of the project. The project signs sign shall be erected within five (5) days after approval of the sign layoutlayout or as directed by the DHHL. After the final approval of the construction work by the DHHL, the project signs sign shall be removed from the site and shall become the property of the Contractor. The project sign shall not be removed without prior approval from DHHL. Payment No payment will be made for the number of two (2) project signs indicated in the proposal, painted, with lettering specified by DHHL, erected in place complete (see enclosed details) complete, maintained, and payment removed. Cost for sign removal signs shall be incidental to these items.project work. PROJECT SIGN SPECIFICATIONS LETTER STYLE COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. ART WORK CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. TITLES THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’— 2” STRIPE. MATERIALS PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. PAINT AND INKS SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: