Common use of Project Sign Clause in Contracts

Project Sign. The CONTRACTOR shall furnish, erect, maintain and remove one project sign. The project signboard shall be 3/4 inch thick, “AC” exterior grade fir plywood, 4 feet in height and 7 feet long each. All lettering type and size and color selection shall be as specified by DHHL (refer to Exhibit A). All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy Xxxxxx-X’Xxxxx, Xxxxxxx, Pittsburg, Sherwin—Xxxxxxxx, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer’s directions. Signs shall be painted with one prime coat and two finish coats. Final layout shall be based upon sign plans submitted by the CONTRACTOR and approved by the DHHL. The Project Sign shall be erected at a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The sign shall be maintained in good condition throughout the progress of the work until final completion of the project. The project sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project sign shall be removed from the site and shall become the property of the CONTRACTOR. Payment will be made for one project sign painted, with lettering specified by DHHL, in place complete (see attachment). Payment for sign removal shall be incidental to said item. COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—2” STRIPE. PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED) 4. 1M52E TOKAY (GRAY) REFERENCE TO PPG COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 5. 455-7 DEEP EMERALD XXXXXXX X. XXXX XX. 1. Coordination of Services by the STATE 2 2. Relationship of Parties: Independent Contractor Status and Responsibilities, Including Tax Responsibilities 2 3. Personnel Requirements 3 4. Nondiscrimination 3 5. Conflicts of Interest 3 6. Subcontracts and Assignments 3 7. Indemnification and Defense 4 8. Cost of Litigation 4

Project Sign. The CONTRACTOR shall furnish, erect, maintain and remove one project signsign for each job site. The project signboard shall be 3/4 inch thick, “AC” exterior grade fir plywood, 4 feet in height and 7 feet long each. All lettering type and size and color selection shall be as specified by DHHL (refer to Exhibit “A”). All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy Xxxxxx-X’Xxxxx, Xxxxxxx, Pittsburg, Sherwin—XxxxxxxxWilliams, XxxxxxxxSinclair, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer’s directions. Signs shall be painted with one prime coat and two finish coats. Final layout shall be based upon sign plans submitted by the CONTRACTOR and approved by the DHHL. The Project Sign shall be erected at a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The sign shall be maintained in good condition throughout the progress of the work until final completion of the project. The project sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project sign shall be removed from the site and shall become the property of the CONTRACTOR. Payment will be made for one project sign painted, with lettering specified by DHHL, in place complete (see attachment). Payment for sign removal shall be incidental to said item. COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—2” STRIPE. PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED) 4. 1M52E TOKAY (GRAYXXXX) REFERENCE TO PPG COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 5. 455-7 DEEP EMERALD XXXXXXX X. XXXX XX. 1. Coordination of Services by the STATE 2 2. Relationship of Parties: Independent Contractor Status and Responsibilities, Including Tax Responsibilities 2 3. Personnel Requirements 3 4. Nondiscrimination 3 5. Conflicts of Interest 3 6. Subcontracts and Assignments 3 7. Indemnification and Defense 4 8. Cost of Litigation 4 9. Liquidated Damages 4 10. STATE'S Right of Offset 4 11. Disputes 4 12. Suspension of Contract 4 13. Termination for Default 5 14. Termination for Convenience 6

Project Sign. The CONTRACTOR Contractor shall furnish, erect, maintain and remove (2) project signs. One (1) sign shall be based on the State of Hawaii standards, and one project sign(1) sign shall follow the USDA template as shown on page 24 of this document. The State of Hawaii sign shall adhere to the details and specifications as follows. The project signboard shall be 3/4 inch ¾” thick, “AC” exterior grade fir plywood, 4 feet in height and in 7 feet long eachlong. All lettering type and size and color selection shall be as specified by DHHL (refer to Exhibit A)below. All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy Boy, Xxxxxx-X’Xxxxx, Xxxxxxx, Pittsburg, Sherwin—Xxxxxxxx-Williams, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer’s directions. Signs Sign shall be painted with one prime coat and two finish coats. Final layout shall be based upon sign plans submitted by the CONTRACTOR Contractor and approved by the DHHL. The Project Sign shall be erected at a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signssign. The sign shall be maintained in good condition throughout the progress of the work until final completion of the project. The project sign shall be erected within five (5) days after approval of the sign layoutlayout or as directed by the DHHL. After the final approval of the construction work by the DHHL, the project sign shall be removed from the site and shall become the property of the CONTRACTORContractor. Payment The project sign shall not be removed without prior approval from DHHL. No payment will be made for one two (2) project sign signs painted, with lettering specified by DHHL, erected in place complete (see attachment)complete, maintained, and removed. Payment Cost for sign removal signs shall be incidental to said itemproject work. PROJECT SIGN SPECIFICATIONS LETTER STYLE COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—26’— 2” STRIPE. PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: : 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED) ) 4. 1M52E TOKAY (GRAY) REFERENCE TO PPG COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 5. 455-7 DEEP EMERALD XXXXXXX X. XXXX XX. 1. Coordination of Services by the STATE 2 2. Relationship of Parties: Independent Contractor Status and Responsibilities, Including Tax Responsibilities 2 3. Personnel Requirements 3 4. Nondiscrimination 3 5. Conflicts of Interest 3 6. Subcontracts and Assignments 3 7. Indemnification and Defense 4 8. Cost of Litigation 4)

Project Sign. The CONTRACTOR Contractor shall furnish, erect, maintain and remove one project sign. The project signboard shall be 3/4 inch thick, “AC” exterior grade fir plywood, 4 feet in height and 7 feet long each. All lettering type and size and color selection shall be as specified by DHHL (refer to Exhibit A1). All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy Xxxxxx-X’Xxxxx, Xxxxxxx, Pittsburg, Sherwin—Xxxxxxxx-Williams, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer’s directions. Signs shall be painted with one prime coat and two finish coats. Final layout shall be based upon sign plans submitted by the CONTRACTOR Contractor and approved by the DHHL. The Project Sign shall be erected at a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signs. The sign shall be maintained in good condition throughout the progress of the work until final completion of the project. The project sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project sign shall be removed from the site and shall become the property of the CONTRACTORContractor. Payment will be made for one project sign painted, with lettering specified by DHHL, in place complete (see attachment)complete. Payment for sign removal shall be incidental to said item. COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—2” STRIPE. PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED) 4. 1M52E TOKAY (GRAY) REFERENCE TO PPG COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 5. 455-7 DEEP EMERALD XXXXXXX X. XXXX XX. 1. Coordination of Services by the STATE 2 2. Relationship of Parties: Independent Contractor Status and Responsibilities, Including Tax Responsibilities 2 3. Personnel Requirements 3 4. Nondiscrimination 3 5. Conflicts of Interest 3 6. Subcontracts and Assignments 3 7. Indemnification and Defense 4 8. Cost of Litigation 4

Project Sign. The CONTRACTOR Contractor shall furnish, erect, maintain and remove (2) project signs. One (1) sign shall be based on the State of Hawaii standards, and one project sign(1) sign shall follow the USDA template as shown on page 24 of this document. The State of Hawaii sign shall adhere to the details and specifications as follows. The project signboard shall be 3/4 inch ¾” thick, “AC” exterior grade fir plywood, 4 feet in height and in 7 feet long eachlong. All lettering type and size and color selection shall be as specified by DHHL (refer to Exhibit A)below. All paints used shall be exterior enamel paints manufactured either by Ameritone-Devoe, Boysen, DuPont, Dutch Boy Boy, Xxxxxx-X’Xxxxx, Xxxxxxx, Pittsburg, Sherwin—Xxxxxxxx-Williams, Xxxxxxxx, or approved equal, and made primarily for the purpose for which they are used, and shall be prepared and applied strictly in accordance with the manufacturer’s directions. Signs Sign shall be painted with one prime coat and two finish coats. Final layout shall be based upon sign plans submitted by the CONTRACTOR Contractor and approved by the DHHL. The Project Sign shall be erected at a location directed by the DHHL and shall be adequately braced in such a way that does not interfere with the viewing of the signssign. The sign shall be maintained in good condition throughout the progress of the work until final completion of the project. The project sign shall be erected within five (5) days after approval of the sign layout. After the final approval of the construction work by the DHHL, the project sign shall be removed from the site and shall become the property of the CONTRACTORContractor. The project sign shall not be removed without prior approval from DHHL. Payment will be made for one (1) project sign painted, with lettering specified by DHHL, in place complete (see attachment)complete. Payment for sign removal shall be incidental to said item. PROJECT SIGN SPECIFICATIONS LETTER STYLE COPY IS CENTERED AND SET IN ADOBE TYPE FUTURA HEAVY. IF THIS SPECIFIC TYPE IS NOT AVAILABLE, FUTURA DEMI BOLD MAY BE SUBSTITUTED. COPY SHOULD BE SET AND SPACED BY A PROFESSIONAL TYPESETTER AND ENLARGED PHOTOGRAPHICALLY FOR PHOTO STENCIL SCREEN PROCESS. CONSTANT ELEMENTS OF THE SIGN LAYOUTS -- FRAME, OUTLINE, STRIPE, AND OFFICIAL STATE INFORMATION -- MAY BE DUPLICATED FOLLOWING WORKING DRAWING MEASUREMENTS OR BE REPRODUCED AND ENLARGED PHOTOGRAPHICALLY USING A LAYOUT TEMPLATE IF PROVIDED. THE STATE OF HAWAII” MASTHEAD SHOULD BE REPRODUCED AND ENLARGED AS INDICATED USING THE ARTWORK PROVIDED. THE SPECIFIC MAJOR WORK OF THE PROJECT UNDER CONSTRUCTION IS EMPHASIZED BY USING 3-3/4” TYPE (OR AS SPECIFIED BY DHHL), ALL CAPITALS. SECONDARY INFORMATION SUCH AS LOCATIONS OR BUILDING USES 2-1/4” TYPE, ALL CAPITALS. OTHER RELATED INFORMATION OF LESSER IMPORTANCE USES 2-1/4” (CAPITAL HEIGHT) TYPE IN LOWER CASE LETTERS. ALL LINES OF TYPE SHOULD NOT EXCEED THE WIDTH OF THE 6’—26’— 2” STRIPE. PANEL IS 3/4” THICK, “AC” EXTERIOR GRADE FIR PLYWOOD WITH RESIN BONDED SURFACES ON BOTH SIDES. SCREEN PAINT INKS ARE MATTE FINISH. PAINTS ARE SATIN FINISH, EXTERIOR GRADE. REFERENCE TO AMERITONE COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: : 1. 1BL1OA BOHEMIAN BLUE 2. 2H16P SOFTLY (WHITE) 3. 2VR2A HOT TANGO (RED) ) 4. 1M52E TOKAY (GRAY) REFERENCE TO PPG COLOR KEY PAINT IS FOR COLOR WHICH MATCH ONLY. COLOR: 5. 455-7 DEEP EMERALD XXXXXXX X. XXXX XX. 1. Coordination of Services by the STATE 2 2. Relationship of Parties: Independent Contractor Status and Responsibilities, Including Tax Responsibilities 2 3. Personnel Requirements 3 4. Nondiscrimination 3 5. Conflicts of Interest 3 6. Subcontracts and Assignments 3 7. Indemnification and Defense 4 8. Cost of Litigation 4)