Contractor shall Perform fully under the Contract;
Customer will Select and notify Boeing of the suppliers and part numbers of the following BFE items by the following dates: Galley System Complete 2005 Galley Inserts Complete 2005 Seats (passenger) Complete 2005 Cabin Systems Equipment Complete 2005 Miscellaneous Emergency Equipment Complete 2005 Cargo Handling Systems ****N/A****
Construction Administration Phase Delete the following paragraph if Submittal Exchange isn’t going to be used: 2.
Other Controller Audit Any other Controller may audit SAP’s control environment and security practices relevant to Personal Data processed by SAP in line with Section 5.1 only if any of the cases set out in Section 5.1 applies to such other Controller. Such audit must be undertaken through and by Customer as set out in Section 5.1 unless the audit must be undertaken by the other Controller itself under Data Protection Law. If several Controllers whose Personal Data is processed by SAP on the basis of the Agreement require an audit, Customer shall use all reasonable means to combine the audits and to avoid multiple audits.
Department’s Contract Manager The Department’s Contract Manager, who is primarily responsible for the Department’s oversight of the Contract, will be identified in a separate writing to the Contractor upon Contract signing in the following format: Department’s Contract Manager Name Department’s Name Department’s Physical Address Department’s Telephone # Department’s Email Address If the Department changes the Contract Manager, the Department will notify the Contractor. Such a change does not require an amendment to the Contract.
Emergency Manager An Emergency Manager appointed under Local Financial Stability and Choice Act is authorized to reject, modify, or terminate this Agreement as provided in the Local Financial Stability and Choice Act, 2012 Public Act 436.
Construction Phase - Administration of the Construction Contract INDICATE IN STATEMENT OF WORK “NOT APPLICABLE” IF SECTION IS NOT APPLICABLE 1.1.9.1. The Construction Phase will commence with the award of the Construction Contract to a selected vendor (“Contractor”) and will terminate when final payment is made by the State to the Contractor. In any event, the construction phase will not extend 60 days beyond the substantial completion date unless extended by change order. If such extension occurs, additional costs due to the ARCHITECT/ENGINEER shall be negotiated with the State. 1.1.9.2. The ARCHITECT/ENGINEER shall work with the State during the construction of the Project to provide the administration of the contract between the State and the Contractor in accordance with the terms herein and consistent with the contract between the State and the Contractor, and the extent of his/her duties and responsibilities and the limitations of his/her authority as assigned therein shall not be modified without his/her written consent. 1.1.9.3. The ARCHITECT/ENGINEER shall advise and consult with the State, and all of the State's instructions to the Contractor shall be issued through the ARCHITECT/ENGINEER after authorization by the State. 1.1.9.4. The ARCHITECT/ENGINEER shall, at all times, have access to the work wherever it is in preparation or progress. 1.1.9.5. The ARCHITECT/ENGINEER shall make periodic visits to the Project site, at least biweekly, and shall make such further visits when reasonably requested by the State, as to familiarize himself/herself with the progress and quality of the work performed and as to determine, on the basis of such visits, if such progress and quality are in accordance with the Contract Documents. The ARCHITECT/ENGINEER shall be responsible for project meeting minutes. In addition to this, the ARCHITECT/ENGINEER shall periodically report his/her findings thereon to the State, at such times as in the exercise of his/her professional judgment such findings are appropriate and at least monthly, at the conference provided for in Section 1.1.9.6, and further at such times as the State may reasonably request. The ARCHITECT/ENGINEER shall not be required to make exhaustive or continuous on-site inspections, except as required in the exercise of his/her professional judgment for said reports and, except in particular, to fulfill the commissioning requirements. The ARCHITECT/ENGINEER shall not be responsible for construction means, methods, techniques, sequences or procedures or for safety precautions and programs in connection with the work, and he/she shall not be responsible for the Contractor's failure to carry out the work in accordance with the Contract Documents except as provided for herein specifically between the State and the ARCHITECT/ENGINEER. 1.1.9.6. In preparing the bid documents, to the extent that the ARCHITECT/ENGINEER utilizes sub- consultants for their expertise, such as, but not limited to: Landscape Architects, Civil, Structural, Mechanical, and Electrical Engineers, these consultants, in effect, become an extension of the ARCHITECT/ENGINEER. Where the term ARCHITECT/ENGINEER is used in Section 1.1.9.2 as well as 1.1.9.5, it shall include those sub-consultants when work is being performed in their area of expertise. For example, the Mechanical Engineer would inspect the under slab plumbing before it is backfilled, but then wouldn’t necessarily be needed on site until the rest of the mechanical systems are being installed. The sub-consultant shall also be required to periodically inspect the progress of the “As-builts” and verify that they are up-to-date and verify such to the ARCHITECT/ENGINEER, before the ARCHITECT/ENGINEER issues the certificate of payment for that pay period. 1.1.9.7. Based upon his/her determinations and reports made under Section 1.1.9.5 of this Agreement and upon the Contractor's applications for payment, the ARCHITECT/ENGINEER shall once every month, after an on-site conference between the State, the Contractor and the ARCHITECT/ENGINEER, determine the amount then owing to the Contractor and shall then issue a certificate of payment for the amount agreed upon. The issuance of a Certificate for Payment shall constitute a representation by the ARCHITECT/ENGINEER to the State, based on such ARCHITECT/ENGINEER'S determination and report and the data supplied to him/her by the Contractor (without affecting his/her duties defined in Section 1.1.9.5.), that the work has progressed to the point indicated; that the quality of the work is in accordance with the Contract Documents (subject to the results of any specified subsequent tests required by the Contract Documents, to immaterial and insubstantial deviations from the Contract Documents, which will be corrected prior to completion, and to any further specific qualifications stated in the Certificate for Payment); and that the Contractor is entitled to such payment in the amount certified. Provided, however, the issuance of such certificate will not affect any obligations of the Contractor to the State. By issuing a certificate for payment, the ARCHITECT/ENGINEER shall not be deemed to represent that he/she has made any examination to ascertain how and for what purpose the Contractor has used the monies paid on account of the contract sum. ARCHITECT/ENGINEER shall not accept any part of the work on behalf of the State; ARCHITECT/ENGINEER may only recommend acceptance. Final acceptance is a right reserved solely to the State. 1.1.9.8. The ARCHITECT/ENGINEER shall be, in the first instance, the interpreter of the requirements of all Construction Documents, and shall have all requisite authority relating thereto for the purposes of authorizing the Contractor to proceed or stop with any component of the project after consultation and agreement with the State. The ARCHITECT/ENGINEER shall not be liable to the State for any loss or cost incurred by the State arising from delays in the construction schedule caused by any decision made by the ARCHITECT/ENGINEER in the reasonable exercise of professional judgment either to exercise or not to exercise his/her authority to stop the Work. 1.1.9.9. The ARCHITECT/ENGINEER shall review and respond to shop drawings, samples, and other submissions of the Contractor as in conformance with the design concept and information in the Contract Documents and the designs and plans relating to the project until approved or not requiring re-submission. The ARCHITECT/ENGINEER shall also review the submittal log at construction meetings and report to the State, on a monthly basis, their findings thereon. 1.1.9.10. The ARCHITECT/ENGINEER shall prepare all change orders and supporting data for the State's approval. 1.1.9.11. The ARCHITECT/ENGINEER shall conduct inspections to determine the Dates of Substantial Completion and Final Completion and shall receive written guarantees and related documents assembled by the Contractors and shall issue a final certificate of payment in accordance with Section 1.1.9.6. 1.1.9.12. The ARCHITECT/ENGINEER shall be responsible for system commissioning in accordance with the BGS Design Guidelines and as indicated in the BGS Commissioning Guidelines. Please see the BGS website xxxx://xxx.xxxxxxx.xxx/facilities/forms . The ARCHITECT/ENGINEER shall inspect, and document, each and every system to ensure that it complies with design intent, including but not limited to: system installation, system operation, and seasonal changeover. 1.1.9.13. Except in the manner specifically provided for herein, the ARCHITECT/ENGINEER shall not be responsible to the State for the acts or omissions of the Contractor or any of the Contractor’s agents or employees, or any other person not an employee or agent of the ARCHITECT/ENGINEER performing work on the Project. The ARCHITECT/ENGINEER shall be responsible for and shall pay the amount of any increase in the total Contract Price or the total Change Order(s) Price, which increase results from an error, inconsistency, or omission in the Contract Documents or instructions. 1.1.9.14. ARCHITECT/ENGINEER shall furnish to the State, a complete set of marked-up drawings and specifications showing all the changes to the Construction Documents made by Addenda, Change Orders, Shop Drawings, RFIs and other information received from the Clerk; and General Contractor’s As-built markups. The changes to the drawings are to be created on a separate layer in the DWG set and highlighted in a box, cloud or the like in the PDF set. The specifications are also to differentiate the changes made by highlighting in a box, cloud, etc. and be provided in Microsoft Word. These drawings and specifications shall be supplied within three (3) months of the date of Substantial Completion and before final payment. 1.1.9.15. Architect/Engineer (and design team members as required) shall conduct a one-year warranty inspection of the completed construction project between the eleventh and twelfth month from the date of substantial completion and shall issue a list of defective items needing correction to the Contractor.
Pendahuluan Industri perbankan syari’ah di Indonesia tengah memasuki fase growth (pertumbuhan) xxx sangat membutuhkan kepercayaan xxx loyalitas masyarakat untuk terus meningkatkan produktivitasnya. Kepercayaan xxx loyalitas mutlak dibutuhkan untuk memasuki fase maturity perbankan syariah dalam menghadapi kompetisi global. Kepercayaan xxx loyalitas tidak dapat diperoleh tanpa adanya produk- produk yang mampu menjawab kebutuhan masyarakat. Produk bank syariah sudah semestinya mampu memenuhi seluruh komponen masyarakat, baik dalam produk funding, financing, xxx services. Oleh karenanya, inovasi produk bank syariah menjadi syarat mutlak sebagai indikator bahwa bank syariah mampu beradaptasi dengan kebutuhan manusia modern. Inovasi produk merupakan salah satu unsur penting untuk dapat menjaga sustainabilitas perusahaan. Inovasi produk merepresentasikan kemampuan perusahaan untuk dapat memenuhi kebutuhan pasar sekaligus sebagai upaya untuk memperoleh keuntungan perusahaan. Bank syariah pada dasarnya telah melakukan serangkaian upaya inovasi, salah satunya adalah dengan melakukan “rekayasa” (engineering) terhadap akad- akad dalam fiqh muamalah. Beberapa akad dalam fiqh muamalah tidak begitu saja diadopsi oleh perbankan syariah, namun juga “diadaptasikan” dengan kebutuhan masyarakat terhadap xxxx-xxxx perbankan. Rekayasa xxx adaptasi ini memang sebuah keniscayaan, karena jika adopsi dilakukan secara apa adanya maka produk bank syariah diragukan dapat memberikan manfaat yang tepat bagi masyarakat. Prinsip keleluasan bermuamalah dalam Islam merupakan modal utama untuk menghadapi kompleksitas permasalahan ekonomi serta besarnya tuntutan masyarakat akan peran perbankan syariah.1 Dalam rangka memenuhi kebutuhan masyarakat xxx mengembangkan industri perbankan xxx keuangan xxxx xxxx kompetitif, inovasi dalam berbisnis yang dilakukan oleh perbankan syariah melalui serangkaian adaptasi tersebut memang sudah menjadi tuntutan bisnis. Sebagai contoh dapat dikemukakan xxxxxx xxxx kartu kredit syariah, asuransi syariah, obligasi syariah, FX iB, xxx Islamic Swap. Produk-produk dalam kegiatan keuangan syariah tersebut mengandung beberapa akad. Sebagai contoh, dalam transaksi kartu kredit syariah terdapat akad ijarah, qardh, xxx kafalah. Obligasi syariah mengandung sekurang-kurangnya akad mudharabah (atau ijarah) xxx wakalah, serta terkadang disertai kafalah atau wa’d. Islamic swap mengandung beberapa kali akad tawarruq, bay‘, wakalah, xxxxx, xxx terkadang disertai wa’d.2 Dalam setiap transaksi, akad-akad tersebut dilakukan secara bersamaan atau setidak-tidaknya setiap akad yang terdapat dalam suatu produk tidak bisa ditinggalkan, karena kesemuanya merupakan satu kesatuan. Transaksi seperti 1 Xxxxxx Xxxxx Xxxxxx, “Konstruksi Akad dalam Pengembangan Produk Perbankan Syariah di Indonesia”, Al-‘Adalah, Vol. 12, No. 3 (Juni, 2015), 493. 2 Xxxxxxxxx Xxxxxxx, “Multiakad dalam Transaksi Syariah Kontemporer pada Lembaga Keuangan Syariah di Indonesia”, Al-Iqtishad, Vol. 3, No. 1 (Januari, 2011), 156. inilah yang dikenal dengan istilah multiakad (Indonesia) atau hybrid contract (Inggris) atau al-’uqud al-murakkabah (Arab). Hybrid contract merupakan perbincangan yang masih hangat dikalangan para cendikiawan muslim untuk menentukan keabsahan hukumnya. Pendapat pertama mengatakan hukumnya mubah berdasar kaidah fiqh al-ashlu fi al-mu’amalat al-ibahah (hukum asal muamalah adalah boleh). Pendapat kedua mengharamkan berdasarkan dengan hadits-hadits yang mengharamkan dua jual beli dalam satu jual beli (bai’ataini fi bai’atin), atau mengharamkan dua akad dalam satu akad (shafqatain fi shafqatin).3 Sebagai entitas bisnis yang menjadi bagian penting dalam sistem ekonomi syariah sebagai induknya, tentunya industri perbankan syariah tidak boleh keluar dari nilai-nilai syariah. Melakukan inovasi memang tuntutan bisnis, namun menjaga shariah compliance juga menjadi kewajiban bagi setiap pelaku bisnis syariah, tidak terkecuali perbankan syariah. Profit-oriented hanya boleh dijadikan sebagai media (tool) untuk mencapai tujuan (goal), yaitu benefit-oriented. Produk bank syari’ah seyogyanya memiliki multi benefit, yaitu: material benefit, emotional benefit, xxx spiritual benefit.4 Mengacu pada kondisi tersebut, maka inovasi produk perbankan syariah setidaknya memerhatikan inovasi dalam dua dimensi, yaitu dimensi ekonomi xxx dimensi sosial. Inovasi dalam dimensi ekonomi artinya bahwa produk perbankan syariah harus mampu menghadirkan produk yang sesuai dengan kebutuhan masyarakat, sehingga bank syariah menjadi pilihan utama masyarakat. Jika hal ini dapat dilakukan, maka fungsi-fungsi bank syariah akan mampu memainkan perannya sebagai intermediary institution. Pada dimensi sosial, sebagai produsen jasa keuangan syariah, bank syariah bertanggung jawab untuk melakukan edukasi terhadap perilaku masyarakat. Bank syariah xxx masyarakat xxxxxx melekat xxx memengaruhi satu dengan yang lain. Pada satu sisi, bank syariah melalui pola inovasinya harus mampu “men-syariah- kan” perilaku masyarakat, khususnya yang berhubungan dengan lembaga 3 Najamuddin, “Al-‘Uqud Al-Murakkabah dalam Perspektif Ekonomi Syariah”, Jurnal Syariah, Vol. 2, No. 2 (Oktober, 2013), 6.
Operations Manager Secondary Contact Email Secondary Contact Phone Secondary Contact Fax Secondary Contact Mobile 1 Administration Fee Contact Name Administration Fee Contact Email 1 Administration Fee Contact Phone 2 0
Emergency Maintenance LightEdge reserves the right to perform emergency Service maintenance as needed outside the Scheduled Maintenance window, in which case LightEdge will make a reasonable effort to notify the Customer if feasible under the circumstances. Any such maintenance will be considered an “Emergency Maintenance”. All Service SLAs will apply during Emergency Maintenance.