PVB BIDDING PROCESS Sample Clauses

PVB BIDDING PROCESS. 01 Each Pilot may maintain a current SBF APPENDIX 11 A STANDING BID FORM that shall serve, on a continuous basis, as his bid for any Positions.
AutoNDA by SimpleDocs
PVB BIDDING PROCESS. .01 Each Pilot may maintain a current A STANDING BID FORM that shall serve, on a continuous basis, as his bid for any Positions. .02 A SBF shall identify a Pilot’s desired Positions in numerical order of preference. .03 A Pilot may modify his bid it at any time by means of a new SBF. .04 A Pilot shall forward his SBF to the Chief Pilot via email, or facsimile. .05 After dating and signing the SBF, the Chief Pilot shall return one (1) copy to the Pilot. .06 If a standing bid results in an award, the SBF is removed from the file. .07 Only SBF submitted on or prior to the closing time and date of the PVB, shall be taken into consideration for the award.

Related to PVB BIDDING PROCESS

  • Bidding Process 3.1. Bidding shall generally commence based on the sequence of the lot being shown on the PAH Website. However the Auctioneer has the right to vary the sequence without having to give prior notice to the intended bidders. 3.2. It shall be the responsibilities of the E-bidders to login through PAH website to wait for the turn to bid for the property lot in which they intend to bid. 3.3. The Auctioneer has the discretion to set a new reserve price in the event that there is more than one (1) registered bidder. 3.4. The amount of incremental bid will appear on the website prior to the commencement of the auction. 3.5. Registered online Bidders shall start bidding online by pressing the BID Button using their own gadgets with internet connection. If your bid is the highest, it will be denoted by a Green Coloured Box otherwise it will be a Red Coloured Box The highest bid shall flash 10 seconds (subject to change) interval for four (4) times " Calling Once, Calling Twice, Last Call and Sold". E-bidders may submit their bid at any of these stages of biddings by pressing the BID button. The successful bidder's bid will be denoted by a green coloured screen. The highest bidder shall be declared as the successful purchaser upon the fall of the hammer. 3.6. In the event that there is no bid after forty(40) seconds from the time of commencement of the auction, the auction shall be aborted. 3.7. Any bid once entered by the registered online E-bidders shall be binding and the bid shall not be withdrawn or retracted in any manner whatsoever after the fall of the hammer. 3.8. Both the successful and unsuccessful bidders will be notified by the Auctioneer through the website and also via E-mail where further directions are given in order to conclude the sale of the auction property. 3.9. In the event of any dispute, the decision of the Auctioneer shall be final and binding on all bidders. 3.10. Unsuccessful E-bidders shall have the deposit refunded to the same bank account from which the deposit transfer was made within two (2) working days from the date of auction. 3.11. The information shown and/or prompted on the screen handled by the PAH website in regards to the auction in particular the increment of the bidding price during the bidding process and the declaration of the successful bidder shall be final and conclusive.

  • BIDDING PROCEDURE 1.1 Sealed bid, (formal and informal), subject to Instructions and General Conditions and any special conditions set forth herein, will be received in the office of the Purchasing Division, 440 So. 8th St., Lincoln, NE 68508, until the bid closing date and time indicated for furnishing Lancaster County, hereinafter referred to as “County”, the materials, supplies, equipment or services shown in the electronic bid request. 1.2 Bidders shall use the electronic bid system for submitting bids and must complete all required fields. If you do not care to bid, please respond to the bid request and note your reason. 1.3 Identify the item you will furnish by brand or manufacturer’s name and catalog numbers. Also furnish specifications and descriptive literature if not bidding the specific manufacturer or model as listed in the specifications. 1.4 Any person submitting a bid for a firm, corporation, or other organization must show evidence of his authority so to bind such firm, corporation, or organization. 1.5 Bids received after the time and date established for receiving bids will be rejected. 1.6 The Bidders and public are invited, but not required, to attend the formal opening of bids. At the opening, prices will be displayed electronically and/or read aloud to the public. The pricing is also available for immediate viewing on-line. No decisions related to an award of a contract or purchase order will be made at the opening.

  • BIDDING PROCEDURES 4.1. Bidders have to login at EHSAN AUCTIONEERS SDN. BHD. Website using the same registered email 30 minute before Auction Time. 4.2. Bidders have to click VIEW BID SCREEN BUTTON beside the status to show the bidding screen. Once enter the bidding screen bidders will be on STANDBY MODE 30 minute before the auction started. 4.3. Bidding shall generally commence based on the sequence of the lot being shown on the EHSAN AUCTIONEERS SDN. BHD. website. However, the Auctioneer has the right to vary this sequence without notice. 4.4. It shall be the responsibility of registered E-Bidders to log in through the EHSAN AUCTIONEERS SDN. BHD. website to wait for their turn to bid for the property lot in which they intend to bid. 4.5. The Auctioneer has the right to set a new reserve price in the event there is more than 1 bidder. The reference to a "bidder” here includes E-Bidders as well as on-site bidders. 4.6. Auctioneer will announce the amount of incremental bid and the same will appear on the website prior to the commencement of the auction. 4.7. “Standby mode” is displayed, followed by a message stating “AUCTION STARTED”. Enter your BID by clicking “NEXT BID” button. 4.8. Each bid will be called for 3 times, “FIRST CALLING, “SECOND CALLING”, “FINAL CALL”. Registered E-Bidders may submit their bid at any of these stages of biddings by click the bid amount. 4.9. Any bid by the registered E-bidders shall not be withdrawn once entered. 4.10. In the event of any clarification, disruption or special situation, the Auctioneer may at his discretion decide to pause, postpone and/or call off the public auction. The E-bidders will be notified of this on the BIDDING SCREEN. 4.11. When system displays “NO MORE BIDS”, no further bids will be accepted by the Auctioneer, whether on-site or through the EHSAN AUCTIONEERS SDN. BHD. website. 4.12. The bidder with the highest bid shall be declared as successful bidder upon the fall of hammer. 4.13. The decision of the Auctioneer shall be final and binding on all on-site and/or E-bidders. 4.14. A successful bidder will be directed to a page where further directions are given in order to conclude the sale of the auction property. Please also refer to Part 5 below. 4.15. Unsuccessful E-Bidders will have the deposit paid processed to be refunded to the same bank account from which the deposit transfer was made within three (3) working days. 4.16. The information shown and/or prompted on the screen handled by the EHSAN AUCTIONEERS SDN. BHD. website regarding the public auction, particularly to the calling of bidding price during the bidding process and the declaration of successful bidder shall be final and conclusive.

  • Ordering Process 6.4.1 CLEC, or CLEC's agent, shall act as the single point of contact for its End User Customers' service needs, including without limitation, sales, service design, order taking, Provisioning, change orders, training, maintenance, trouble reports, repair, post-sale servicing, Billing, collection and inquiry. CLEC's End User Customers contacting Qwest in error will be instructed to contact CLEC; and Qwest's End User Customers contacting CLEC in error will be instructed to contact Qwest. In responding to calls, neither Party shall make disparaging remarks about each other. To the extent the correct provider can be determined, misdirected calls received by either Party will be referred to the proper provider of local Exchange Service; however, nothing in this Agreement shall be deemed to prohibit Qwest or CLEC from discussing its products and services with CLEC's or Qwest's End User Customers who call the other Party seeking such information. 6.4.2 CLEC shall transmit to Qwest all information necessary for the ordering (Billing, Directory Listing and other information), installation, repair, maintenance and post-installation servicing according to Qwest's standard procedures, as described in the Qwest Product Catalog (PCAT) available on Qwest's public web site located at xxxx://xxx.xxxxx.xxx/wholesale/pcat. Information shall be provided using Qwest's designated Local Service Request (LSR) format which may include the LSR, End User Customer and resale forms. 6.4.3 Qwest will use the same performance standards and criteria for installation, Provisioning, maintenance, and repair of services provided to CLEC for resale under this Agreement as Qwest provides to itself, its Affiliates, its subsidiaries, other Resellers, and Qwest retail End User Customers. The installation, Provisioning, maintenance, and repair processes for CLEC's resale service requests are detailed in the Access to OSS Section of this Agreement, and are applicable whether CLEC's resale service requests are submitted via Operational Support System or by facsimile. 6.4.4 CLEC is responsible for providing to Qwest complete and accurate End User Customer Directory Listing information including initial and updated information for Directory Assistance Service, white pages directories, and E911/911 Emergency Services. The Ancillary Services Section of this Agreement contains complete terms and conditions for Directory Listings for Directory Assistance Services, white pages directories, and E911/911 Emergency Services. 6.4.5 If Qwest's retail End User Customer, or the End User Customer's New Service Provider orders the discontinuance of the End User Customer's existing Qwest service in anticipation of the End User Customer moving to a New Service Provider, Qwest will render its closing xxxx to the End User Customer, discontinuing Billing as of the date of the discontinuance of Qwest's service to the End User Customer. If the Current Service Provider, or if the End User Customer's New Service Provider orders the discontinuance of existing resold service from the Current Service Provider, Qwest will xxxx the Current Service Provider for service through the date the End User Customer receives resold service from the Current Service Provider. Qwest will notify CLEC by Operational Support System interface, facsimile, or by other agreed-upon processes when an End User Customer moves from the Current Service Provider to a New Service Provider. Qwest will not provide the Current Service Provider with the name of the New Service Provider selected by the End User Customer. 6.4.6 CLEC shall provide Qwest and Qwest shall provide CLEC with points of contact for order entry, problem resolution and repair of the resold services. These points of contact will be identified for both CLEC and Qwest in the event special attention is required on a service request. 6.4.7 Prior to placing orders on behalf of the End User Customer, CLEC shall be responsible for obtaining and having in its possession Proof of Authorization (POA), as set forth in the POA Section of this Agreement. 6.4.8 Due Date intervals for CLEC's resale service requests are established when service requests are received by Qwest through Operational Support Systems or by facsimile. Intervals provided to CLEC shall be equivalent to intervals provided by Qwest to itself, its Affiliates, its subsidiaries, other Resellers, and to Qwest's retail End User Customers.

  • Offering Process In connection with the Offering, each of the Co-Managers will: a. Familiarize itself to the extent it deems appropriate with the business, operations, financial condition and prospects of the Client, including the artwork to be beneficially owned by the Client and information relating to the acquisition of the artwork by Client and its affiliates; b. Review to its satisfaction the final offering circular filed with the United States Securities and Exchange Commission (“SEC”) pursuant to Rule 253(g) (the “Offering Circular”) and such other documents to be used by such Co-Manager (the “Offering Materials”) in connection with the offering of the Securities; and c. Review to its satisfaction the active and planned operational practices and procedures of the Client in the conduct of the Offering and assist the Client to meet certain applicable rules and regulations promulgated by, and guidance issued by, the SEC and Financial Industry Regulatory Authority, Inc. (“FINRA”). If each of the Co-Managers is satisfied with the results of its due diligence of Client, each Co-Manager Adviser will then be authorized to: a. Identify and contact possible high net-worth, ultra-high net-worth, and institutional investors, which might have an interest in receiving the Offering Materials and evaluating participation in the Offering; b. Engage in conversations with potential investors that express an interest in learning more about the Offering (and similar transactions) via the Masterworks Platform and were directed to the Co-Manager by the Masterworks Platform, which is controlled by an affiliate of the Client; c. Use the Offering Circular (and any other Offering Materials approved by the Client and such Co-Manager) for solicitation purposes, which the Client will distribute via the Masterworks Platform to each potential investor concurrently with or in advance of any oral communication by a registered representative with such potential investor; d. Attend meetings with Client and potential investors, and assist the Client in responding to due diligence requests from potential investors; e. Ensure to its satisfaction that Anti-Money Laundering (“AML”) procedures are implemented for all potential investors in the Offering; f. Ensure to its satisfaction that suitability assessments are conducted for all potential investors with which such Co-Manager has any communications; and g. Generally assist the Client in its sale of securities to those potential investors accepted by Client in the Offering.

  • Approval Process Tenant shall notify Landlord whether it approves of the submitted working drawings within three business days after Landlord’s submission thereof. If Tenant disapproves of such working drawings, then Tenant shall notify Landlord thereof specifying in reasonable detail the reasons for such disapproval, in which case Landlord shall, within five business days after such notice, revise such working drawings in accordance with Tenant’s objections and submit the revised working drawings to Tenant for its review and approval. Tenant shall notify Landlord in writing whether it approves of the resubmitted working drawings within one business day after its receipt thereof. This process shall be repeated until the working drawings have been finally approved by Landlord and Tenant. If Tenant fails to notify Landlord that it disapproves of the initial working drawings within three business days (or, in the case of resubmitted working drawings, within one business day) after the submission thereof, then Tenant shall be deemed to have approved the working drawings in question. Any delay caused by Tenant’s unreasonable withholding of its consent or delay in giving its written approval as to such working drawings shall constitute a Tenant Delay Day (defined below). If the working drawings are not fully approved (or deemed approved) by both Landlord and Tenant by the 15th business day after the delivery of the initial draft thereof to Tenant, then each day after such time period that such working drawings are not fully approved (or deemed approved) by both Landlord and Tenant shall constitute a Tenant Delay Day.

  • JOB BIDDING Section 1. All job vacancies will be posted as follows: a.) The position will be posted on Kaleidascope for seven (7) calendar days. b.) The posting shall include the position (job title), posting dates, status, hours per pay period, shift, starting and ending times, pay grade and the qualifications for the position as defined in the job description for the position. A copy of all job postings will be sent to the Union. c.) Employees may not be accepted for posted positions until they have completed six (6) months of employment. In addition, an employee who has transferred to a position must remain in that position for six (6) months before applying for another posted position. Except that an employee may apply for a posted position which is at a higher pay grade without regard to the six (6) month limit. This paragraph shall not apply to intra cost center shift change or intra cost center status changes. Section 2. Posted positions shall be filled by the most senior qualified applicant from within the bargaining unit. If the position cannot be filled from within the bargaining unit, the Employer may fill the position from any source available to the Employer, provided the candidate meets all of the qualifications for hiring into that position. In all instances, the appropriate manager is responsible for the interview and selection of applicants within fourteen (14) days of the end of the posting. Section 3. A qualified applicant shall be defined as an employee who possesses the entry level qualifications in the job description and is able to do the work when required. Ability to do the work and documented performance, inclusive of disciplinary record, may be considered when awarding a position. The Employer will notify all applicants of the result of their bid in a timely manner not to exceed two (2) weeks from the date the position is awarded. Section 4. A successful bidder shall be required to serve a sixty (60) calendar day trial period exclusive of any classroom training required. At the midpoint of the trial period the employee shall be evaluated and given written notification if a problem exists. During the trial period, the employee will be returned to his/her original position if the employee elects to be returned or the Employer finds the employee is unsatisfactory in the new position.

  • Hearing Procedures The hearing shall be held at the earliest convenient date, taking into consideration the established schedule of the Board or hearing officer and the availability of the CSEA representative, counsel and witnesses. The parties shall be notified of the time and place of the hearing after ensuring availability of all necessary parties. The employee shall be entitled to appear personally, produce evidence, and have CSEA representation. The employee shall be entitled to a public hearing if he/she demands it when the Board is hearing the appeal. 18.12.1 The complainant may also be represented by counsel. The procedure entitled "Administrative Adjudication" commencing with Government Code 11500 shall not apply to any such hearing before the Board or a hearing officer. Neither the Board nor a hearing officer shall be bound by rules of evidence used in California courts. Informality in any such hearing shall not invalidate any order or decision made or approved by the hearing officer or the Board. 18.12.2 All hearings shall be heard by a hearing officer (who shall be an attorney licensed in the State of California) except in those cases where the Board determines to hear the appeal itself. In any case in which the Board hears the appeal, the Board may use the services of its counsel or a hearing officer in ruling upon procedural questions, objections to evidence, and issues of law. However, the Board must employ separate counsel from the one presenting the case for the complainant. 18.12.3 If the appeal is heard by the Board, the Board shall affirm, modify or revoke the recommended personnel action. 18.12.4 If the appeal is heard by a hearing officer, he/she shall prepare a proposed decision in a form that may be adopted by the Board as the decision in the case. A copy of the proposed decision shall be received and filed by the Board and furnished to each party within ten days after the proposed decision is filed by the Board. After furnishing the proposed decision to each party, the Board may: 18.1.4.1 Adopt the proposed decision in its entirety. 18.1.4.2 Reduce the personnel action set forth in the proposed decision and adopt the balance of the proposed decision. 18.1.4.3 Reject a proposed reduction in personnel action, approve the disciplinary action sought by the complainant or any lesser penalty, and adopt the balance of the proposed decision. 18.1.4.4 Reject the proposed decision in its entirety. 18.12.5 If the Board rejects the proposed decision in its entirety, each party shall be notified of such action and the Board may decide the case upon the record including the transcript, with or without the taking of additional evidence, or may refer the case to the same or another hearing officer to take additional evidence. If the case is so assigned to a hearing officer, he/she shall prepare a proposed decision, as provided in item Section 18.12.4 above, upon the additional evidence and the transcript and other papers which are part of the record of the prior hearing. A copy of this proposed decision shall be furnished to each party within 10 days after the proposed decision is filed by the Board. 18.12.6 In arriving at a decision or a proposed decision on the propriety of the proposed disciplinary action, the Board or the hearing officer may consider the records of any prior disciplinary action proceedings against the employee in which a disciplinary action was ultimately sustained and any records that were contained in the employee's personnel files and introduced into evidence at the hearing.

  • Bidding Phase 2.8.1 The Professional, following the Owner's approval of the Construction Document Phase, shall assist the Owner in obtaining bids and in award and preparation of Construction Contracts. 2.8.2 The Professional shall attend the bid opening and furnish a suitably detailed tabulation sheet for recording the name of each Bidder, the Bidder's Certificate of Responsibility Number, Bid Security, Base Bid, Alternates, and remarks. The Professional shall furnish sufficient tabulation sheets for all in attendance. Immediately after receipt of bids, the Professional shall submit to the Owner a certified tabulation of all bids received, along with his recommendation as to Contract award. 2.8.3 The Professional, following the award of a Construction Contract, shall prepare and submit to the Owner, two (2) copies of updated Construction Documents (Plans/Specifications). Each copy shall be marked OFFICIAL CONTRACT DOCUMENTS and shall include an executed bid Proposal Form, Agreement Form, Contract Bond, Power of Attorney, Certificate of Insurance, all bulletins, Addenda, and supplemental Drawings. One (1) copy shall be retained by the Owner, one (1) copy shall be for the Contractor. Any other contract document guidelines will be distributed to the Professional at the bid opening. 2.8.4 The Professional shall also furnish the area and volume of the building computed in accordance with criteria of the American Institute of Architects; and the square foot and cubic foot costs of only the building, the mechanical system, the electrical system, special built-in equipment, and the total Project cost. 2.8.5 The Professional shall, unless waived by the Owner, also submit one electronic format copy of the updated Contract Documents (plans and specifications) in coordination with said Contract Documents in 2.8.3 above. Said electronic submittal to be submitted within thirty (30) days after award by Owner in .pdf format. The actual cost of the electronic submittal shall be paid by the Owner, with cost approval by the Owner before printing is ordered in accordance with 3.4.

  • Closing Procedures Subject to satisfaction or waiver by the relevant Party of the conditions of Closing, on the Closing Date, the Sellers shall deliver actual possession of the Purchased Interest to the Purchaser and upon such delivery the Purchaser shall pay and issue the Purchase Price in accordance with Section 2.3.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!