Quality Control—Devices Sample Clauses

Quality Control—Devices. LABS agrees that any products bearing any Masimo Licensed Trademark shall be of a high standard of quality, so as to protect and enhance the goodwill pertaining to the Licensed Trademarks. Masimo has the right to inspect the manufacturing and distribution points of LABS for products bearing Masimo Licensed Trademarks, at any reasonable time, to ensure the ongoing quality of any product bearing that Party’s Licensed Trademarks. Should Masimo at any time determine that the quality of any product bearing a Masimo Licensed Trademark does not adhere to these quality standards, Masimo will provide written detailed notice to LABS. LABS shall have three months from such notice to bring the quality of such product up to standard or to cease any further use of the Masimo Licensed Trademark in connection with the promotion or sale of such device or product until MASIMO has indicated that it is satisfied that the deficiencies in quality of the particular product has been corrected. For any sublicenses granted under the Masimo Licensed Trademarks, LABS agrees to use reasonable commercial efforts to coordinate quality control consistent with this Section over the manufacture, advertisement, promotion and sale of any products offered by the sublicensee using the MASIMO Licensed Trademarks.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Quality Control—Devices. LABS agrees that the Licensed Devices and Stand Alone Licensed Devices bearing the Licensed Trademark, and any products or services of LABS associated with the Licensed Trademarks shall be of a high standard of quality, so as to protect and enhance the goodwill pertaining to the Licensed Trademarks. MASIMO has the right to inspect the manufacturing and distribution points of LABS for products bearing Licensed Trademarks, at any reasonable time, to ensure the ongoing quality of the Licensed Devices, Stand Alone Licensed Devices, and any products or services offered under the MASIMO name. Should MASIMO at any time determine that the quality of any Licensed Device, Stand Alone Licensed Device or any product or service offered under the MASIMO name, does not adhere to MASIMO's quality standards, MASIMO will provide written detailed notice to LABS. LABS shall have three months from such notice to bring the quality of such Licensed Device, Stand Alone Licensed Device, other product or service up to standard or to cease any further use of the Licensed Trademark in connection with the promotion or sale of such device or product until MASIMO has indicated that it is satisfied that the deficiencies in quality of the Licensed Device have been corrected. For any sublicenses granted under the Licensed Trademarks, LABS agrees to use its best efforts to coordinate quality control consistent with this Section 2.3.4 over the manufacture, advertisement, promotion and sale of the License Devices, Stand Alone Licensed Devices, and any products or services within the Licensed Applications offered in connection with the Licensed Trademarks by the sublicensee.
Sample 1Sample 2

Related to Quality Control—Devices

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time.

  • Quality Control Procedures The Seller must have an internal quality control program that verifies, on a regular basis, the existence and accuracy of the legal documents, credit documents, property appraisals, and underwriting decisions. The program must be capable of evaluating and monitoring the overall quality of its loan production and servicing activities. The program is to ensure that the Mortgage Loans are originated and serviced in accordance with prudent mortgage banking practices and accounting principles; guard against dishonest, fraudulent, or negligent acts; and guard against errors and omissions by officers, employees, or other authorized persons.

  • Compliance Control Services (1) Support reporting to regulatory bodies and support financial statement preparation by making the Fund's accounting records available to the Trust, the Securities and Exchange Commission (the “SEC”), and the independent accountants.

  • Manufacturing and Marketing Rights The Company has not granted rights to manufacture, produce, assemble, license, market, or sell its products to any other person and is not bound by any agreement that affects the Company's exclusive right to develop, manufacture, assemble, distribute, market, or sell its products.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Technical Specifications Each Bloom System is an integrated system comprised of a fuel cell stack assembly and associated balance of plant components that converts a fuel into electricity using electrochemical means that (i) has a Nameplate Capacity of at least 0.5 kilowatts of electricity using an electrochemical process and (ii) has an electricity-only generation efficiency greater than thirty percent (30%).

  • Manufacturing Intrexon shall have the option and, in the event it so elects, shall use Diligent Efforts, to perform any manufacturing activities in connection with the Aquaculture Program that relate to the Intrexon Materials, including through the use of a suitable Third Party contract manufacturer. To the extent that Intrexon so elects, Intrexon may request that AquaBounty and Intrexon establish and execute a separate manufacturing and supply agreement, which agreement will establish and govern the production, quality assurance, and regulatory activities associated with manufacture of Intrexon Materials. Except as provided in Section 4.1, any manufacturing undertaken by Intrexon pursuant to the preceding sentence shall be performed in exchange for cash payments equal to Intrexon’s Fully Loaded Cost in connection with such manufacturing, on terms to be negotiated by the Parties in good faith. In the event that Intrexon does not manufacture Intrexon Materials or bulk quantities of other components of AquaBounty Products, then Intrexon shall provide to AquaBounty or a contract manufacturer selected by AquaBounty and approved by Intrexon (such approval not to be unreasonably withheld) all Information Controlled by Intrexon that is (a) related to the manufacturing of such Intrexon Materials or bulk qualities of other components of AquaBounty Products for use in the Field and (b) reasonably necessary to enable AquaBounty or such contract manufacturer (as appropriate) for the sole purpose of manufacturing such Intrexon Materials or bulk quantities of other components of AquaBounty Products. The costs and expenses incurred by Intrexon in carrying out such transfer shall be borne by Intrexon. Any manufacturing Information transferred hereunder to AquaBounty or its contract manufacturer shall not be further transferred to any Third Party, including any Product Sublicensee, or any AquaBounty Affiliate without the prior written consent of Intrexon; provided, however, that Intrexon shall not unreasonably withhold such consent if necessary to permit AquaBounty to switch manufacturers.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Access Control Landlord shall be the sole determinant of the type and amount of any access control or courtesy guard services to be provided to the Project, if any. IN ALL EVENTS, LANDLORD SHALL NOT BE LIABLE TO TENANT, AND TENANT HEREBY WAIVES ANY CLAIM AGAINST LANDLORD, FOR (I) ANY UNAUTHORIZED OR CRIMINAL ENTRY OF THIRD PARTIES INTO THE PREMISES, THE BUILDING OR THE PROJECT, (II) ANY DAMAGE TO PERSONS, OR (III) ANY LOSS OF PROPERTY IN AND ABOUT THE PREMISES, THE BUILDING OR THE PROJECT, BY OR FROM ANY UNAUTHORIZED OR CRIMINAL ACTS OF THIRD PARTIES, REGARDLESS OF ANY ACTION, INACTION, FAILURE, BREAKDOWN, MALFUNCTION AND/OR INSUFFICIENCY OF THE ACCESS CONTROL OR COURTESY GUARD SERVICES PROVIDED BY LANDLORD, IF ANY. Tenant shall provide such supplemental security services and shall install within the Premises such supplemental security equipment, systems and procedures as may reasonably be required for the protection of its employees and invitees, provided that Tenant shall coordinate such services and equipment with any security provided by Landlord. The determination of the extent to which such supplemental security equipment, systems and procedures are reasonably required shall be made in the sole judgment, and shall be the sole responsibility, of Tenant. Tenant acknowledges that it has neither received nor relied upon any representation or warranty made by or on behalf of Landlord with respect to the safety or security of the Premises or the Project or any part thereof or the extent or effectiveness of any security measures or procedures now or hereafter provided by Landlord, and further acknowledges that Tenant has made its own independent determinations with respect to all such matters.

  • Commercialization Reports After the First Commercial Sale of a Licensed Product anywhere in the Territory, LICENSEE shall submit to Cornell semi-annual reports on or before each February 28 and August 31 of each year. Each report shall cover LICENSEE’s (and each Affiliate’s and Sublicensee’s) most recently completed calendar half-year and shall show:

Time is Money Join Law Insider Premium to draft better contracts faster.