Milestone Schedule Please state the status and progress of each Milestone and identify any completed Milestone(s) for the previous calendar quarter.
DELIVERY: FOB DESTINATION, INSIDE DELIVERY, FREIGHT PAID Whenever possible, contractors should give the ordering entities 3 working days prior notice of any deliveries and/or installations. Furniture contractors will not be responsible for the removal/moving of existing furnishings unless requested by the ordering entity. Contractors should verify site readiness prior to delivery. All deliveries will be made during normal working hours unless otherwise arranged with the ordering entity. Contractor will communicate any scheduling delays and/or changes immediately. Agencies will not be responsible for any freight damage, concealed or otherwise.
Shipment Terms Seller shall ship Goods in the method identified by AGILENT to permit Seller to meet the delivery date(s) identified by AGILENT on the face of this Order (“Delivery Date”). If Seller ships by any other method, Seller shall pay any resulting increase in the cost of freight. Except as specified below, shipments of Goods shall be FCA (as that term is defined in the Incoterms 2010 handbook) Seller's place of shipment/export, and title and risk of loss or damage shall pass from Seller to AGILENT upon Seller's delivery of the Goods to the designated carrier at the place of shipment/export. If AGILENT agrees to pay for applicable freight charges and duties as part of the purchase price, shipment shall be DDP, and title and risk of loss or damage shall pass from Seller to AGILENT upon Seller’s delivery of the Goods to the "Ship To" address identified by AGILENT on the face of this Order.
Software License Terms (a) Software that is made available by a Provider to Recipient in connection with any Service (any such Software being referred to herein as “TSA-Licensed Software”) provided hereunder will be subject to the terms set forth in this Section 3.5 except as otherwise provided in the applicable Service Schedule. The Provider hereby grants to the Recipient a non-exclusive, non-transferable license to use, in object code form, any TSA-Licensed Software that is made available by the Provider pursuant to a Service Schedule. For the avoidance of doubt, the Provider that makes available any TSA-Licensed Software in connection with the provision of any Service retains the unrestricted right to enhance or otherwise modify such TSA-Licensed Software at any time, provided that such enhancements or other modifications do not disrupt the provision of such Service to the Recipient.
(b) The Recipient may not exceed the number of licenses, agents, tiers, nodes, seats, or other use restrictions or authorizations, if any, specified in the applicable Service Schedule. Some TSA-Licensed Software may require license keys or contain other technical protection measures. The Recipient acknowledges that the Provider may monitor the Recipient’s compliance with use restrictions and authorizations remotely, or otherwise. If the Provider makes a license management program available which records and reports license usage information, the Recipient agrees to appropriately install, configure and execute such license management program.
(c) Unless otherwise permitted by the Provider, the Recipient may only make copies or adaptations of the TSA-Licensed Software for archival purposes or when copying or adaptation is an essential step in the authorized use of TSA-Licensed Software. If the Recipient makes a copy for backup purposes and installs such copy on a backup device, the Recipient may not operate such backup installation of the TSA-Licensed Software without paying an additional license fee, except in cases where the original device becomes inoperable. If a copy is activated on a backup device in response to failure of the original device, the use on the backup device must be discontinued when the original or replacement device becomes operable. The Recipient may not copy the TSA-Licensed Software onto or otherwise use or make it available on, to, or through any public or external distributed network. Licenses that allow use over the Recipient’s intranet require restricted access by authorized users only.
(d) The Recipient must reproduce all copyright notices that appear in or on the TSA-Licensed Software (including documentation) on all permitted copies or adaptations. Copies of documentation are limited to internal use.
(e) Notwithstanding anything to the contrary herein, certain TSA-Licensed Software may be licensed under the applicable Service Schedule for use only on a computer system owned, controlled, or operated by or solely on behalf of the Recipient and may be further identified by the Provider by the combination of a unique number and a specific system type (“Designated System”) and such license will terminate in the event of a change in either the system number or system type, an unauthorized relocation, or if the Designated System ceases to be within the possession or control of the Recipient.
(f) The Recipient will not modify, reverse engineer, disassemble, decrypt, decompile, or make derivative works of the TSA-Licensed Software. Where the Recipient has other rights mandated under statute, the Recipient will provide the Provider with reasonably detailed information regarding any intended modifications, reverse engineering, disassembly, decryption, or decompilation and the purposes therefor.
(g) The Recipient may permit a consultant or subcontractor to use TSA-Licensed Software at the licensed location for the sole purpose of providing services to the Recipient.
(h) Upon expiration or termination of the Service Schedule under which TSA-Licensed Software is made available, the Recipient will destroy the TSA-Licensed Software. The Recipient will remove and destroy or return to the Provider any copies of the TSA-Licensed Software that are merged into adaptations, except for individual pieces of data in the Recipient’s database. The Recipient will provide certification of the destruction of TSA-Licensed Software, and copies thereof, to the Provider. The Recipient may retain one copy of the TSA-Licensed Software subsequent to expiration or termination solely for archival purposes.
(i) The Recipient may not sublicense, assign, transfer, rent, or lease the TSA-Licensed Software to any other person except as permitted in this Section 3.5.
(j) The Recipient agrees that the Provider may engage a third party designated by the Provider and approved by the Recipient (such approval not to be unreasonably withheld) to audit the Recipient’s compliance with the Software License terms. Any such audit will be at the Provider’s expense, require reasonable notice, and will be performed during normal business hours. Such third party will be required to execute a non-disclosure agreement that restricts such third party from disclosing confidential information of the Recipient to the Provider, except to the extent required to report on the extent to which the Recipient is not in compliance with the Software License terms.
Development Schedule The Project shall substantially comply with the specific timetables and triggers for action set forth in Article 5 of this Agreement. The parties acknowledge that, as provided in G.S. 160A-400.25(b), the failure to meet a commencement or completion date shall not, in and of itself, constitute a material breach of this Agreement pursuant to G.S. 160A-400.27 but must be judged based upon the totality of the circumstances.
Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition
4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999.
4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities.
4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process.
4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers.
4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support.
4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities.
4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.
Contract Task Order A- E shall be assigned work via a task order by COUNTY which shall subsequently be referred to as the “Contract Task Order” (hereinafter “CTO”). A CTO for each project shall be developed by A-E in conjunction with COUNTY Project Management staff. The County Project Manager shall manage all A-E’s work including monitoring the CTO work schedule, quality of deliverables, review of invoiced amounts, adherence to set budget, and internal review of submittal packages. A-E shall follow all requirements as outlined in the CTO; this general Scope of Work, the project specific Scope Statement, and the Architect-Engineer Guide (Rev July 2018). The CTO shall include a detailed Scope Statement, describing tasks to be performed with a specific list of deliverables for each task, schedule of work and cost to complete the work. The schedule of work shall allow enough time for meetings with County Management staff to review the work progress, provide technical and policy direction, resolve problems and ensure adherence to the work completion schedule. The CTO shall include a cover sheet provided by County Project Management staff with the appropriate signature blocks and contract information. Once both Parties agree, and all Parties have signed the CTO, County Management staff shall provide A-E with a Notice to Proceed (NTP) to begin work. A-E shall submit all plans, reports and other documents produced under the CTO to the assigned County Project Manager within the timeframe indicated in the CTO or as directed by County Project Management staff.
MSAA Indicator Technical Specification Document This Agreement shall be interpreted with reference to the MSAA Indicator Technical Specifications document.
Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning):
1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises.
2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated.
3. If capacity exists, provide "side-door" porting through the switch.
4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch).
2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases.
2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.
RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.
