Replacement of Take or Pay Coal Supply Arrangement Sample Clauses

Replacement of Take or Pay Coal Supply Arrangement. The Owner may put in place a fuel supply agreement that does not contain either or both a Maximum Take or Pay Coal Quantity or a Minimum Take or Pay Coal Quantity. Upon the agreement of the Buyer to the terms of such fuel supply agreement ( such agreement not to be unreasonably withheld) the relevant terms of Schedules C and E shall be revised accordingly. If such an agreement is put in place, Schedule E shall be applied with an infinite Maximum Take or Pay Coal Quantity per Year or a Minimum Take or Pay Coal Quantity of zero (0) GJs per Year, as the case may be.
AutoNDA by SimpleDocs

Related to Replacement of Take or Pay Coal Supply Arrangement

  • CONDITIONS FOR EMERGENCY/HURRICANE OR DISASTER - TERM CONTRACTS It is hereby made a part of this Invitation for Bids that before, during and after a public emergency, disaster, hurricane, flood, or other acts of God that Orange County shall require a “first priority” basis for goods and services. It is vital and imperative that the majority of citizens are protected from any emergency situation which threatens public health and safety, as determined by the County. Contractor agrees to rent/sell/lease all goods and services to the County or other governmental entities as opposed to a private citizen, on a first priority basis. The County expects to pay contractual prices for all goods or services required during an emergency situation. Contractor shall furnish a twenty-four (24) hour phone number in the event of such an emergency.

  • Interconnection Facility Options The Intercarrier Compensation provisions of this Agreement shall apply to the exchange of Exchange Service (EAS/Local) traffic between CLEC's network and Qwest's network. Where either Party acts as an IntraLATA Toll provider, each Party shall xxxx the other the appropriate charges pursuant to its respective tariff or price lists. Where either Party interconnects and delivers traffic to the other from third parties, each Party shall xxxx such third parties the appropriate charges pursuant to its respective tariffs, price lists or contractual offerings for such third party terminations. Absent a separately negotiated agreement to the contrary, the Parties will directly exchange traffic between their respective networks without the use of third party transit providers.

  • Shared Loss Arrangement (a) Loss Mitigation and Consideration of Alternatives. (i) For each Single Family Shared-Loss Loan in default or for which a default is reasonably foreseeable, the Assuming Institution shall undertake reasonable and customary loss mitigation efforts, in accordance with any of the following programs selected by Assuming Institution in its sole discretion, Exhibit 5 (FDIC Mortgage Loan Modification Program), the United States Treasury's Home Affordable Modification Program Guidelines or any other modification program approved by the United States Treasury Department, the Corporation, the Board of Governors of the Federal Reserve System or any other governmental agency (it being understood that the Assuming Institution can select different programs for the various Single Family Shared-Loss Loans) (such program chosen, the “Modification Guidelines”). After selecting the applicable Modification Guideline for each such Single Family Shared-Loss Loan, the Assuming Institution shall document its consideration of foreclosure, loan restructuring under the applicable Modification Guideline chosen, and short-sale (if short-sale is a viable option) alternatives and shall select the alternative the Assuming Institution believes, based on its estimated calculations, will result in the least Loss. If unemployment or underemployment is the primary cause for default or for which a default is reasonably foreseeable, the Assuming Institution may consider the borrower for a temporary forbearance plan which reduces the loan payment to an affordable level for at least six (6) months. (ii) Losses on Home Equity Loans shall be shared under the charge-off policies of the Assuming Institution’s Examination Criteria as if they were Single Family Shared-Loss Loans. (iii) Losses on Investor-Owned Residential Loans shall be treated as Restructured Loans, and with the consent of the Receiver can be restructured under terms separate from the Exhibit 5 standards. Please refer to Exhibits 2(a)(1)-(2) for guidance in Calculation of Loss for Restructured Loans. Losses on Investor-Owned Residential Loans will be treated as if they were Single Family Shared-Loss Loans. (iv) The Assuming Institution shall retain its loss calculations for the Shared Loss Loans and such calculations shall be provided to the Receiver upon request. For the avoidance of doubt and notwithstanding anything herein to the contrary, (x) the Assuming Institution is not required to modify or restructure any Shared-Loss Loan on more than one occasion and (y) the Assuming Institution is not required to consider any alternatives with respect to any Shared-Loss Loan in the process of foreclosure as of the Bank Closing if the Assuming Institution can document that a loan modification is not cost effective and shall be entitled to continue such foreclosure measures and recover the Foreclosure Loss as provided herein, and (z) the Assuming Institution shall have a transition period of up to 90 days after Bank Closing to implement the Modification Guidelines, during which time, the Assuming Institution may submit claims under such guidelines as may be in place at the Failed Bank.

  • Price Adjustments for OGS Centralized Contracts Periodic price adjustments will occur no more than twice per year on a schedule to be established solely by OGS. Pricing offered shall be fixed for the first twelve (12) months of the Contract term. Such price increases will only apply to the OGS Centralized Contracts and shall not be applied retroactively to Authorized User Agreements or any Mini-bids already submitted to an Authorized User. Price decreases may be made at any time. Additionally, some price decreases shall be calculated in accordance with Appendix B, section 17, Pricing.

  • Flexible Working Arrangements In accordance with the Employment Relations Act 2000, an employee affected by family violence may request a short-term (two months or less) variation of their employment arrangements to assist the employee to deal with the effects of family violence.

  • Assuming Bank’s Liquidation of Remaining Single Family Shared-Loss Loans In the event that the Assuming Bank does not conduct a Portfolio Sale pursuant to Section 4.1, the Receiver shall have the right, exercisable in its sole and absolute discretion, to require the Assuming Bank to liquidate for cash consideration, any Single Family Shared-Loss Loans held by the Assuming Bank at any time after the date that is six months prior to the Termination Date. If the Receiver exercises its option under this Section 4.2, it must give notice in writing to the Assuming Bank, setting forth the time period within which the Assuming Bank shall be required to liquidate the Single Family Shared-Loss Loans. The Assuming Bank will comply with the Receiver’s notice and must liquidate the Single Family Shared-Loss Loans as soon as reasonably practicable by means of sealed bid sales to third parties, not including any of the Assuming Bank’s affiliates, contractors, or any affiliates of the Assuming Bank’s contractors. The selection of any financial advisor or other third party broker or sales agent retained for the liquidation of the remaining Single Family Shared-Loss Loans pursuant to this Section shall be subject to the prior approval of the Receiver, such approval not to be unreasonably withheld, delayed or conditioned.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Conditions & Requirements

  • Can I Roll Over or Transfer Amounts from Other IRAs or Employer Plans If properly executed, you are allowed to roll over a distribution from one Traditional IRA to another without tax penalty. Rollovers between Traditional IRAs may be made once every 12 months and must be accomplished within 60 days after the distribution. Beginning in 2015, just one 60 day rollover is allowed in any 12 month period, inclusive of all Traditional, Xxxx, SEP, and SIMPLE IRAs owned. Under certain conditions, you may roll over (tax-free) all or a portion of a distribution received from a qualified plan or tax-sheltered annuity in which you participate or in which your deceased spouse participated. In addition, you may also make a rollover contribution to your Traditional IRA from a qualified deferred compensation arrangement. Amounts from a Xxxx XXX may not be rolled over into a Traditional IRA. If you have a 401(k), Xxxx 401(k) or Xxxx 403(b) and you wish to rollover the assets into an IRA you must roll any designated Xxxx assets, or after tax assets, to a Xxxx XXX and roll the remaining plan assets to a Traditional IRA. In the event of your death, the designated beneficiary of your 401(k) Plan may have the opportunity to rollover proceeds from that Plan into a Beneficiary IRA account. In general, strict limitations apply to rollovers, and you should seek competent advice in order to comply with all of the rules governing rollovers. Most distributions from qualified retirement plans will be subject to a 20% withholding requirement. The 20% withholding can be avoided by electing a “direct rollover” of the distribution to a Traditional IRA or to certain other types of retirement plans. You should receive more information regarding these withholding rules and whether your distribution can be transferred to a Traditional IRA from the plan administrator prior to receiving your distribution.

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!