Responsibilities of Technical Coordinators Sample Clauses

Responsibilities of Technical Coordinators. The Technical Coordinators shall be responsible for communications, other than legal notices, between the parties in matters of quality, manufacturing, project management, and [*CONFIDENTIAL TREATMENT HAS BEEN REQUESTED AS TO CERTAIN PORTIONS OF THIS DOCUMENT. EACH SUCH PORTION, WHICH HAS BEEN OMITTED HEREIN AND REPLACED WITH AN ASTERISK [***], HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION.] compliance with respect to the Product. The Technical Coordinators shall be available on a regular basis for consultation during the Term regarding Supplier’s performance under this Agreement, and compliance with applicable Specifications, Purchaser’s quality requirements, the quality requirements of applicable laws or Regulatory Authorities having jurisdiction over the manufacture of Product hereunder, GMPs, and all other applicable regulatory requirements.

Related to Responsibilities of Technical Coordinators

  • Responsibilities of the Parties 1.5.1 The Parties shall perform all obligations of this Agreement in accordance with all Applicable Laws and Regulations, Operating Requirements, and

  • Responsibilities of Both Parties 6.1 The CLEC providing the circuit between CLEC’s office and SBC-12STATE’s office shall make such circuits available for use in connection with the DA services covered herein. When the total traffic exceeds the capability of the existing circuits, additional circuits will be provided by the CLEC. 6.2 Where applicable, if additional ADAX cards and ASN Routers (with sync and token ring cards) are necessary, they will be provided by SBC-12STATE, and CLEC will reimburse SBC-12STATE for the cost, plus Engineering, Furnish and Installation.

  • RESPONSIBILITIES OF THE OWNER The Owner agrees to: Provide all documentation, records, and disclosures as required by law or required by the Agent to manage and operate the Property, and immediately notify the Agent if the Owner becomes aware of any change in such documentation, records or disclosures, or any matter affecting the habitability of the Property; Indemnify, defend, and hold harmless the Agent, and all persons in the Agent's firm, regardless of responsibility, from all costs, expenses suits, liabilities, damages, attorneys fees, and claims of every type, including, but not limited to, those arising out of injury or death of any person, or damage to any real or personal property of any person, including the Owner, for: Any repairs performed by the Owner or by others hired directly by the Owner; or Those relating to the management, leasing, rental, security deposit, or operation of the Property by the Agent, or any person in the Agent's company, or the performance or exercise of any of the duties, powers, or authorities granted to the Agent; This sub-section, and all rights to the Agent’s indemnification, shall be considered void if the Agent exemplifies any willful acts of gross negligence; Maintain the Property in a condition fit for human habitation as required by applicable State and local laws; Pay all interest on Tenants’ security deposits if required by applicable laws; Carry and pay for: Public and premises liability insurance in an amount of no less than one-million dollars ($1,000,000.00); and Property damage and worker’s compensation insurance adequate to protect the interests of the Owner and the Agent. The Agent shall be, and the Owner authorizes Agent to be, named as an additional insured party on the Owner’s policies; and Pay any late charges, penalties and/or interest imposed by lenders or other parties for failure to make payment only if the failure is due to insufficient funds in the Agent’s trust account available for such payment. In addition, the Owner agrees to replace any funds required if there are insufficient funds in the Agent’s trust account to cover such responsibilities of the Owner.

  • Client’s Responsibilities In addition to other responsibilities herein or imposed by law, the Client shall: (a) Designate in writing a person to act as its representative, such person having complete authority to transmit instructions, receive information, and make or interpret the Client's decisions. (b) Provide all information and criteria as to the Client's requirements, objectives, and expectations for the project and all standards of development, design, or construction. (c) Provide the Consultant all available studies, plans, or other documents pertaining to the project, such as surveys, engineering data, environmental information, etc., all of which the Consultant may rely upon. (d) Arrange for access to the site and other property as required for the Consultant to provide its services. (e) Review all documents or reports presented by the Consultant and communicate decisions pertaining thereto within a reasonable time so as not to delay the Consultant. (f) Furnish approvals and permits from governmental authorities having jurisdiction over the project and approvals and consents from other parties as may be necessary. (g) Obtain any independent accounting, legal, insurance, cost estimating and feasibility services required by Client. (h) Give prompt written notice to the Consultant whenever the Client becomes aware of any development that affects the Consultant's services or any defect or noncompliance in any aspect of the project.

  • Joint Responsibilities The relationship between SAE ITC, the Activities and its Members shall be, and at all times, advisory only, and no party shall have the authority to enter into any contract or commitment in the name of, or on behalf of, any other party. Nothing in this Agreement shall be construed to confer upon either party the status of employee, agent, partner, joint venturer or legal representative of the other, it being intended by all parties to remain independent legal entities solely responsible for its own actions.

  • Responsibilities of the Contractor The Contractor shall provide all technical and professional expertise, knowledge, management, and other resources required for accomplishing all aspects of the tasks and associated activities identified in the Scope of Work. In the event that the need arises for the Contractor to perform services beyond those stated in the Scope of Work, the Contractor and the City shall negotiate mutually agreeable terms and compensation for completing the additional services.

  • RESPONSIBILITIES OF PARTIES A. BST will include billing number information associated with resold exchange lines or SPNP arrangements in its LIDB. The Local Exchange Company will request any toll billing exceptions via the Local Service Request (LSR) form used to order resold exchange lines, or the SPNP service request form used to order SPNP arrangements. B. Under normal operating conditions, BST shall include the billing number information in its LIDB upon completion of the service order establishing either the resold local exchange service or the SPNP arrangement, provided that BST shall not be held responsible for any delay or failure in performance to the extent such delay or failure is caused by circumstances or conditions beyond BST’s reasonable control. BST will store in its LIDB an unlimited volume of the working telephone numbers associated with either the resold local exchange lines or the SPNP arrangements. For resold local exchange lines or for SPNP arrangements, BST will issue line-based calling cards only in the name of Local Exchange Company. BST will not issue line- based calling cards in the name of Local Exchange Company’s individual end users. In the event that Local Exchange Company wants to include calling card numbers assigned by the Local Exchange Company in the BST LIDB, a separate agreement is required. C. BST will provide responses to on-line, call-by-call queries to the stored information for the specific purposes listed in the next paragraph. D. BST is authorized to use the billing number information to perform the following functions for authorized users on an on-line basis: 1. Validate a 14 digit Calling Card number where the first 10 digits are a line number or special billing number assigned by BST, and where the last four digits (PIN) are a security code assigned by BST. 2. Determine whether the Local Exchange Company has identified the billing number as one which should not be billed for collect or third number calls, or both.

  • ARCHITECT’S RESPONSIBILITIES § 2.1 The Architect shall provide professional services as set forth in this Agreement. The Architect represents that it is properly licensed in the jurisdiction where the Project is located to provide the services required by this Agreement, or shall cause such services to be performed by appropriately licensed design professionals. § 2.2 The Architect shall perform its services consistent with the professional skill and care ordinarily provided by architects practicing in the same or similar locality under the same or similar circumstances. The Architect shall perform its services as expeditiously as is consistent with such professional skill and care and the orderly progress of the Project. § 2.3 The Architect shall identify a representative authorized to act on behalf of the Architect with respect to the Project. § 2.4 Except with the Owner’s knowledge and consent, the Architect shall not engage in any activity, or accept any employment, interest or contribution that would reasonably appear to compromise the Architect’s professional judgment with respect to this Project. § 2.5 The Architect shall maintain the following insurance until termination of this Agreement. If any of the requirements set forth below are in addition to the types and limits the Architect normally maintains, the Owner shall pay the Architect as set forth in Section 11.9. § 2.5.1 Commercial General Liability with policy limits of not less than « » ($ « » ) for each occurrence and « » ($ « » ) in the aggregate for bodily injury and property damage. § 2.5.2 Automobile Liability covering vehicles owned, and non-owned vehicles used, by the Architect with policy limits of not less than « » ($ « » ) per accident for bodily injury, death of any person, and property damage arising out of the ownership, maintenance and use of those motor vehicles, along with any other statutorily required automobile coverage. § 2.5.3 The Architect may achieve the required limits and coverage for Commercial General Liability and Automobile Liability through a combination of primary and excess or umbrella liability insurance, provided such primary and excess or umbrella liability insurance policies result in the same or greater coverage as the coverages

  • Responsibilities of Contractor A. The Contractor shall perform all work on the described project as required by the Contract documents. The work to be performed includes the labor and services necessary to produce such replacement, and all materials, supplies, tools, transportation, equipment, and machinery required for replacement. B. This project bid includes all materials, labor and equipment to complete the reconstruction and resurfacing of streets as outlined in the Project Manual for WWREYN - XXXXXXXX SANITARY SEWER - PHASE 1 dated March 25th, 2021 as outlined in Attachment A.

  • Responsibility of the Parties 5.1. The Parties undertake to indemnify each other for any damage (loss) caused by their partial or complete non-performance or improper performance of the Agreement, and the indemnification of damage (loss) does not relieve the Parties from the performance/payment of their obligations under the Agreement. 5.2. In addition, the Customer shall be liable for any damage (loss) caused to the Bank by its partial or complete non-performance or improper performance of the Agreement. Inter alia, unless the Bank decides otherwise, in the event of a breach of the term specified in the Section 3.3.4. of Annex N1 to the Collection Agreement, Bank is entitled to charge the Custumer with additional amount of the respective Interest (as the damage (loss) inflicted) for the period of breach of the term or the Bank shall be entitled to repay the above obligations not later than 14 (fourteen) calendar days after the written application. Indemnification of the damage (loss) does not release the Customer from the performance/payment of the obligations under the Agreement. 5.3. Without prejudice to the provisions of Sections 5.1. and 5.2. of Annex N1 to the Collection Agreement, in order to ensure full and proper performance of the Customer’s obligations under the Agreement, and, respectively, to secure the Bank’s rights and claims, the Customer hereby expressly gives its prior consent that the Bank is fully authorized to: 5.3.1. In the case of several debt arrears, determine the sequence and order of payments of 5.3.2. Block any Account of the Customer without acceptance in the amount of the payment due and in accordance with its applicable rules until any payment under the Agreement is fully and duly covered; 5.3.3. Write off without acceptance all payments due from the any Account of the Customer, and if the payment and the amount available on the Account are in different currencies, the Bank itself can perform conversion at the commercial rate of exchange applicable at the Bank on the date of payment or at the rate of exchange agreed with the Customer (if any), and write off also the conversion cost without acceptance from the Account, and channel the converted amount to cover the appropriate payments. 5.4. During the period of Force Majeure, the Bank shall not be liable for complete or partial nonfulfillment or improper fulfillment of its obligations under the Agreement. 5.5. In the event of Force Majeure, the Parties shall be guided by ICC Uniform Rules.