REWORK AND REPLACEMENT OF REJECTED BATCH Sample Clauses

REWORK AND REPLACEMENT OF REJECTED BATCH. (i) If the Parties agree that a Rejected Batch fails in whole or in part to conform to the Specifications, or if a dispute between the Parties in this regard has been resolved pursuant to Section 5.2(d) in favour of Purchaser, Supplier shall [**] (1) accept return of the Rejected Batch (which shall be returned to Supplier forthwith) or otherwise dispose of the Rejected Batch, as so agreed, and (2) : A. if possible, rework or reclaim the Rejected Batch, or destroy the Rejected Batch; B. and deliver a replacement shipment for the Rejected Batch ("Replacement Batch") which shall conform with the Specifications as promptly as possible, but in no event later than [**] days after the date Supplier accepts Purchaser's written Rejection Notice or the date of the final resolution of the dispute, whichever is earlier provided that Purchaser has not prevented Supplier from maintaining the Safety Stock. The Parties agree that Supplier shall be entitled to use the Materials contained in the Safety Stock to fulfill its obligations under this Section 5.2 (e). (ii) Notwithstanding the existence of a dispute concerning Products rejected by Purchaser, pending resolution of such dispute, Supplier shall, as promptly as possible, but in no event later than [**] days after issue by Purchaser of a Purchase Order for additional Products of the type and quantity claimed to be rejected as contemplated by Section 5.2(b) hereof, deliver such additional Products, and Purchaser shall be obligated to pay for such Products in accordance with Section 3.3 hereof even if such Replacement Batch fails to meet the Specifications, provided that such failure is not the result of Supplier's performance of the Material qualifications in accordance with this Agreement, equipment failure or Supplier not following the Purchaser's formula for the Formulation of the Products. In the event that it is ultimately determined that the Rejected Batch was properly rejected by Purchaser, then Purchaser shall not be liable for the payment of the Rejected Batch and shall be credited accordingly for the payment of same. If it is ultimately determined that the Rejected Batch was not properly rejected by Purchaser, then Purchaser shall promptly pay Supplier for such Rejected Batch.
Sample 1
AutoNDA by SimpleDocs

Related to REWORK AND REPLACEMENT OF REJECTED BATCH

  • Repair and Replacement Company shall be responsible to Lessor for reasonable replacement costs, or reasonable repair costs of all Equipment which is lost, stolen, or damaged while in the care, custody and control of Company as a result of Company's sole negligence in accordance with paragraph 2 above, reasonable wear and tear excepted, using the Actual Cash Value of the Equipment at the time of such loss. Prior to repairing the Equipment, Lessor shall submit to Company at least three estimates, including at least one estimate from a repair facility designated by Company. In the event the Equipment is lost or stolen, Company shall file a police report.

  • Inspection and Rejection of Nonconforming Goods The Buyer has the right to inspect the Goods on or after the Delivery Date. Buyer, at its sole option, may inspect all or a sample of the Goods, and may reject all or any portion of the Goods if it determines the Goods are nonconforming or defective. If Buyer rejects any portion of the Goods, Buyer has the right, effective upon written notice to Seller, to: (a) rescind the Order in its entirety; (b) accept the Goods at a reasonably reduced price; or (c) reject the Goods and require replacement of the rejected Goods. If Buyer requires replacement of the Goods, Seller shall, at its expense, promptly replace the nonconforming Goods and pay for all related expenses, including, but not limited to, transportation charges for the return of the defective goods and the delivery of replacement Goods. If Seller fails to timely deliver replacement Goods, Buyer may replace them with goods from a third party and charge Seller the cost thereof and terminate this Order for cause pursuant to Section 19. Any inspection or other action by Buyer under this Section shall not reduce or otherwise affect Seller's obligations under the Order, and Buyer shall have the right to conduct further inspections after Seller has carried out its remedial actions.

  • Replacements and Replacement Reserve Borrower shall cause Mortgage Borrower to comply with all the terms and conditions set forth in Section 7.3 of the Mortgage Loan Agreement. In the event that, prior to the payment and performance in full of all obligations of Borrower under the Loan Documents, (1) (i) Mortgage Borrower is required to maintain the Replacement Reserve Fund pursuant to the terms of Section 7.3 of the Mortgage Loan Agreement, but Mortgage Lender waives such requirement, (ii) Mortgage Borrower is no longer required pursuant to the terms of the Mortgage Loan Agreement to maintain the Replacement Reserve Fund or (iii) the Mortgage Loan has been repaid in full, and (2) (i) Mezzanine A Borrower is required to maintain the Replacement Reserve Fund pursuant to the terms of Section 7.3 of the Mezzanine A Loan Agreement, but Mezzanine A Administrative Agent waives such requirement, (ii) Mezzanine A Borrower is no longer required pursuant to the terms of the Mezzanine A Loan Agreement to maintain the Replacement Reserve Fund (other than as expressly contemplated under the terms of the Mezzanine A Loan Agreement) or (iii) the Mezzanine A Loan has been repaid in full, then (A) Administrative Agent shall have the right to require Borrower to establish and maintain a reserve account that would operate in the same manner as the Replacement Reserve Fund pursuant to Section 7.3 of the Mortgage Loan Agreement, and (B) the provisions of Section 7.3 of the Mortgage Loan Agreement and all related definitions shall be incorporated herein by reference.

  • Card Replacement If you need to replace your Card for any reason, please contact us at 0-000-000-0000 to request a replacement Card. You will be required to provide personal information which may include your Card number, full name, transaction history, and similar information to help us verify your identity. There is a fee for replacing your Card. For information about the fee, please see the Schedule of Account Fees and Terms below.

  • Emergency Replacement SAP may replace a Subprocessor without advance notice where the reason for the change is outside of SAP’s reasonable control and prompt replacement is required for security or other urgent reasons. In this case, SAP will inform Customer of the replacement Subprocessor as soon as possible following its appointment. Section 6.3 applies accordingly.

  • REPAIRED OR REPLACED PARTS / COMPONENTS Where the Contractor is required to repair, replace or substitute Product or parts or components of the Product under the Contract, the repaired, replaced or substituted Products shall be subject to all terms and conditions for new parts and components set forth in the Contract including Warranties, as set forth in the Additional Warranties Clause herein. Replaced or repaired Product or parts and components of such Product shall be new and shall, if available, be replaced by the original manufacturer’s component or part. Remanufactured parts or components meeting new Product standards may be permitted by the Commissioner or Authorized User. Before installation, all proposed substitutes for the original manufacturer’s installed parts or components must be approved by the Authorized User. The part or component shall be equal to or of better quality than the original part or component being replaced.

  • Effect of Replacement In the event of the substitution of an Airframe or of a Replacement Engine pursuant to Section 10 of the Lease, all provisions of this Trust Indenture relating to the Airframe or Engine or Engines being replaced shall be applicable to such Replacement Airframe or Replacement Engine or Engines with the same force and effect as if such Replacement Airframe or Replacement Engine or Engines were the same airframe or engine or engines, as the case may be, as the Airframe or Engine or Engines being replaced but for the Event of Loss with respect to the Airframe or Engine or Engines being replaced.

  • Provision and Removal of Equipment B2.1 The Contractor shall provide all the Equipment necessary for the supply of the Services.

  • MAINTENANCE AND REPAIR; RULES Tenant will, at its sole expense, keep and maintain the Premises and appurtenances in good and sanitary condition and repair during the term of this Agreement and any renewal thereof. Without limiting the generality of the foregoing, Tenant shall: (a) Not obstruct the driveways, sidewalks, courts, entry ways, stairs and/or halls, which shall be used for the purposes of ingress and egress only; (b) Keep all windows, glass, window coverings, doors, locks and hardware in good, clean order and repair; (c) Not obstruct or cover the windows or doors; (d) Not leave windows or doors in an open position during any inclement weather; (e) Not hang any laundry, clothing, sheets, etc. from any window, rail, porch or balcony nor air or dry any of same within any yard area or space; (f) Not cause or permit any locks or hooks to be placed upon any door or window without the prior written consent of Landlord; (g) Keep all air conditioning filters clean and free from dirt; (h) Keep all lavatories, sinks, toilets, and all other water and plumbing apparatus in good order and repair and shall use same only for the purposes for which they were constructed. Tenant shall not allow any sweepings, rubbish, sand, rags, ashes or other substances to be thrown or deposited therein. Any damage to any such apparatus and the cost of clearing stopped plumbing resulting from misuse shall be borne by Tenant; (i) And Tenant's family and guests shall at all times maintain order in the Premises and at all places on the Premises, and shall not make or permit any loud or improper noises, or otherwise disturb other residents; (j) Keep all radios, television sets, stereos, phonographs, etc., turned down to a level of sound that does not annoy or interfere with other residents; (k) Deposit all trash, garbage, rubbish or refuse in the locations provided therefor and shall not allow any trash, garbage, rubbish or refuse to be deposited or permitted to stand on the exterior of any building or within the common elements; (l) Abide by and be bound by any and all rules and regulations affecting the Premises or the common area appurtenant thereto which may be adopted or promulgated by the Condominium or Homeowners' Association having control over them.

  • Maintenance, Alteration and Repair (a) Resident is responsible for and agrees to take good care of the premises, fixtures and all common areas. Resident may not remove any of Owner’s property and will not perform any repairs, upgrades, painting, wallpapering, electric changes or other alterations of the premises without prior written consent from Owner. Resident will be responsible for damage from waste stoppages caused by foreign or improper objects or improper use in lines serving bathrooms, damage to fixtures, appliances, doors, windows, screens, damage from water faucets left on or from doors left open, and repairs or replacements to alarm devices necessitated by misuse or damage by Resident and/or guests. Extraordinary appliances or furnishings such as satellite dishes, hot tubs, pool tables, water beds or high utility-consuming devices may not be installed or placed on the premises or anywhere at the Property without Owner’s prior written consent, in its sole discretion. SAMPLE (b) In the case of a malfunction of any utilities or damage by fire, water or similar cause, or any water leak, suspected mold or microbial growth, electrical problem, broken glass, broken lock or any other condition that Resident reasonably believes poses a hazard to health and safety, Resident must promptly notify Owner in writing. Owner will act with reasonable time and diligence in making repairs and reconnections; Resident may not withhold or reduce payment of rent or other charges during such time. Maintenance and repair requested by Resident will generally be performed between 8am and 8pm, unless the work is considered an emergency, in which case work may take place at any time. Owner may temporarily disconnect equipment or utilities to avoid property damage and/or to perform repairs requiring such interruption, in Owner’s sole discretion. Owner will not be liable for any inconvenience, discomfort, disruption or interference with Resident use of the premises because of ongoing repairs, alterations or improvements to the Property or any apartment. (c) Following move-in, Resident is responsible for providing and changing all light bulbs and batteries (for smoke detectors and remote controls) in the assigned apartment. A written maintenance report requesting assistance in changing these items may be submitted for maintenance staff assistance, with extra charges payable by Resident as applicable per Owner’s published rates. From time to time, maintenance staff may enter the assigned apartment with or without notice to inspect and change furnace filters and to provide pest control.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!