Sample Disposition Upon Completion of Testing. Unless specified otherwise in the Scope of Services, material samples will be considered consumed in testing and will be disposed of upon completion of the tests.
Sample Disposition Upon Completion of Testing Sample Clauses
Related to Sample Disposition Upon Completion of Testing
Inspection/Testing In order to assess Supplier’s work quality and/or compliance with this Order, upon reasonable notice by Buyer: (a) all goods, materials and services related to the items purchased hereunder, including, raw materials, components, assemblies, work in process, tools and end products shall be subject to inspection and testing by Buyer, its customer, representative or regulatory authorities at all places, including sites where the goods are made or located or the services are performed, whether at Supplier’s premises or elsewhere; and (b) all of Supplier’s facilities, books and records relating to this Order shall be subject to inspection by Buyer or its designee. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Supplier shall notify Buyer in writing at least twenty (20) days prior to each of Supplier’s scheduled final and, if applicable, intermediate test/inspection/witness points. Supplier agrees to cooperate with such/audit inspection including, completing and returning questionnaires and making available its knowledgeable representatives. Buyer’s failure to inspect or test goods, materials or services or Buyer’s failure to reject or detect defects by inspection or testing shall not relieve Supplier from its warranty obligations or any of its other obligations or responsibilities under this Order. Supplier agrees to provide small business as well as minority and/or women owned business utilization and demographic data upon request.
Delivery of Opinion of Counsel in Connection with Substitutions and Repurchases (a) Notwithstanding any contrary provision of this Agreement, no substitution pursuant to Section 2.02 or 2.03 shall be made more than 90 days after the Closing Date unless the Seller delivers to the Trustee an Opinion of Counsel, which Opinion of Counsel shall not be at the expense of either the Trustee or the Trust Fund, addressed to the Trustee, to the effect that such substitution will not (i) result in the imposition of the tax on "prohibited transactions" on the Trust Fund or contributions after the Startup Date, as defined in sections 860F(a)(2) and 860G(d) of the Code, respectively or (ii) cause any REMIC created under this Agreement to fail to qualify as a REMIC at any time that any Certificates are outstanding. (b) Upon discovery by the Depositor, the Seller, the Master Servicer or the Trustee that any Mortgage Loan does not constitute a "qualified mortgage" within the meaning of section 860G(a)(3) of the Code, the party discovering such fact shall promptly (and in any event within five Business Days of discovery) give written notice thereof to the other parties. In connection therewith, the Trustee shall require the Seller, at the Seller's option, to either (i) substitute, if the conditions in Section 2.03(c) with respect to substitutions are satisfied, a Substitute Mortgage Loan for the affected Mortgage Loan, or (ii) repurchase the affected Mortgage Loan within 90 days of such discovery in the same manner as it would a Mortgage Loan for a breach of representation or warranty made pursuant to Section 2.03. The Trustee shall reconvey to the Seller the Mortgage Loan to be released pursuant hereto in the same manner, and on the same terms and conditions, as it would a Mortgage Loan repurchased for breach of a representation or warranty contained in Section 2.03.
Stability Testing Patheon may be requested to conduct stability testing on the Products in accordance with the protocols set out in the Specifications for the separate fees and during the time periods set out in Schedule C to a Product Agreement. Patheon will not make any changes to these testing protocols without prior written approval from Client. If a confirmed stability test failure occurs, Patheon will notify Client within one Business Day, after which Patheon and Client will jointly determine the proceedings and methods to be undertaken to investigate the cause of the failure, including which party will bear the cost of the investigation. Patheon will not be liable for these costs unless it has failed to perform the Manufacturing Services in accordance with the Specifications, cGMPs, and Applicable Laws. Patheon will give Client ail stability test data and results at Client’s request.
DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK
Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.
Agreements for Disposition The Company shall enter into customary agreements (including, if applicable, an underwriting agreement in customary form) and take such other actions as are reasonably required in order to expedite or facilitate the disposition of such Registrable Securities. The representations, warranties and covenants of the Company in any underwriting agreement which are made to or for the benefit of any Underwriters, to the extent applicable, shall also be made to and for the benefit of the holders of Registrable Securities included in such registration statement. No holder of Registrable Securities included in such registration statement shall be required to make any representations or warranties in the underwriting agreement except, if applicable, with respect to such holder’s organization, good standing, authority, title to Registrable Securities, lack of conflict of such sale with such holder’s material agreements and organizational documents, and with respect to written information relating to such holder that such holder has furnished in writing expressly for inclusion in such Registration Statement.
Termination Upon Change of Control Notwithstanding anything to the contrary herein, this Agreement (excluding any then-existing obligations) shall terminate upon (a) the acquisition of the Company by another entity by means of any transaction or series of related transactions to which the Company is party (including, without limitation, any stock acquisition, reorganization, merger or consolidation but excluding any sale of stock for capital raising purposes) other than a transaction or series of transactions in which the holders of the voting securities of the Company outstanding immediately prior to such transaction continue to retain (either by such voting securities remaining outstanding or by such voting securities being converted into voting securities of the surviving entity), as a result of shares in the Company held by such holders prior to such transaction, at least fifty percent (50%) of the total voting power represented by the voting securities of the Corporation or such surviving entity outstanding immediately after such transaction or series of transactions; or (b) a sale, lease or other conveyance of all substantially all of the assets of the Company.
Early Construction of Base Case Facilities Developer may request Connecting Transmission Owner to construct, and Connecting Transmission Owner shall construct, subject to a binding cost allocation agreement reached in accordance with Attachment S to the ISO OATT, including Section 25.8.7 thereof, using Reasonable Efforts to accommodate Developer’s In-Service Date, all or any portion of any System Upgrade Facilities or System Deliverability Upgrades required for Developer to be interconnected to the New York State Transmission System which are included in the Base Case of the Class Year Study for the Developer, and which also are required to be constructed for another Developer, but where such construction is not scheduled to be completed in time to achieve Developer’s In-Service Date.
Constructability Review Prepare detailed interdisciplinary constructability review within Fourteen (14) days of receipt of the plans from the District that: 10.1.2.1.6.1 Ensures construction documents are well coordinated and reviewed for errors; 10.1.2.1.6.2 Identifies to the extent known, construction deficiencies and areas of concern; 10.1.2.1.6.3 Back-checks design drawings for inclusion of modifications; and 10.1.2.1.6.4 Provides the District with written confirmation that: 10.1.2.1.6.4.1 Requirements noted in the design documents prepared for the Project are consistent with and conform to the District's Project requirements and design standards. 10.1.2.1.6.4.2 Various components have been coordinated and are consistent with each other so as to minimize conflicts within or between components of the design documents.
Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.
