Scope and Objectives 1. This Partnership Agreement (hereinafter referred to as the “Agreement”) defines the rights and obligations of the Parties and sets forth the terms and conditions of their cooperation in the implementation of the Project.
Scope and Order Placement These terms may be used by Customer either for a single Order or as a framework for multiple Orders. In addition, these terms may be used on a global basis by the parties’ “Affiliates”, meaning any entity controlled by, controlling, or under common control with a party. The parties can confirm their agreement to these terms either by signature where indicated at the end or by referencing these terms on Orders. Affiliates participate under these terms by placing orders which specify product or service delivery in the same country as the HP Affiliate accepting the Order, referencing these terms, and specifying any additional terms or amendments to reflect local law or business practices.
Scope of Work The Contractor has overall responsibility for and shall provide and furnish all materials, equipment, tools and labor as necessary or reasonably inferable to complete the Work, or any phase of the Work, in accordance with the Owner’s requirements and the terms of the Contract Documents.
Scope of Works CHAPTER III
Scope and Coverage 1. This Chapter applies to measures adopted or maintained by a Party affecting trade in services by service suppliers of the other Party. Such measures include measures affecting: (i) the purchase or use of, or payment for, a service; (ii) the access to and use of, in connection with the supply of a service, services which are required by the Parties to be offered to the public generally; or (iii) the presence, including commercial presence, of persons of a Party for the supply of a service in the territory of the other Party. 2. For purposes of this Chapter, measures adopted or maintained by a Party means measures adopted or maintained by: (i) central, regional or local governments and authorities; and (ii) non-governmental bodies in the exercise of powers delegated by central, regional or local governments or authorities. 3. This Chapter does not apply to: (a) government procurement; (b) air services (4) , including domestic and international air transportation services, whether scheduled or non-scheduled, and related services in support of air services, other than: (i) aircraft repair and maintenance services; (ii) the selling and marketing of air transport services; and (iii) computer reservation system (CRS) services; and (c) subsidies or grants provided by a Party, including government-supported loans, guarantees, and insurance. 4. This Chapter does not impose any obligation on a Party with respect to a natural person of the other Party seeking access to its employment market, or employed on a permanent basis in its territory, and does not confer any right on that natural person with respect to that access or employment. 5. This Chapter does not apply to services supplied in the exercise of governmental authority in a Party's territory. A service supplied in the exercise of governmental authority means any service which is supplied neither on a commercial basis, nor in competition with one or more service suppliers. 6. Nothing in this Chapter shall prevent a Party from applying measures to regulate the entry of natural persons of the other Party into, or their temporary stay in, its territory, including those measures necessary to protect the integrity of, and to ensure the orderly movement of natural persons across its borders, provided that such measures are not applied in such a manner as to nullify or impair the benefits accruing to the other Party under the terms of this Chapter. (5) 7. This Chapter, except for the list of financial services specific commitments in the Schedules of Specific Commitments under this Agreement, does not apply to measures affecting the supply of financial services (6) as defined in subparagraph 5(a) of the GATS Annex on Financial Services. The obligations of each Party with respect to measures affecting the supply of financial services shall be in accordance with its obligations under GATS, the GATS Annex on Financial Services and the GATS Second Annex on Financial Services, and subject to any reservations thereto. The said obligations are hereby incorporated into this Agreement, and the schedule of financial services specific commitments of Annex 6 (Schedules of Specific Commitments) of this Agreement shall apply. 8. In addition to the provisions of this Chapter, the rights and obligations of the Parties in respect of telecommunication services shall also be governed by the provisions of: (a) the GATS Annex on Telecommunications; and
Use and Operation 3.1 Permitted Use ......................................................................................................
SCOPE OF WORK AND RESPONSIBILITIES 1. Interconnection Customer’s Scope of Work and Responsibilities The Interconnection Customer will design, construct, own, operate and maintain the Interconnection Customer’s Interconnection Facilities and Collection Feeder Lines in accordance with the following requirements, to the extent not inconsistent with the terms of this Agreement, the ISO OATT or applicable NYISO Procedures: NYISO requirements, industry standards and specifications, regulatory requirements, the Connecting Transmission Owner’s applicable Connecting Transmission Owner’s Electric System Bulletins (“ESBs”), provided at the following website: xxxxx://xxx.xxxxxxxxxxxxxx.xxx/ProNet/Technical-Resources/Electric- Specifications, the System Protection and Interconnection Customer Attachment Facilities Electric Installation Specification for Xxxxxxxxx Solar Project provided as Appendix C to the Facilities Study for the Small Generating Facility (“Project Specific Specifications”), as such specifications shall be modified as a result of the Interconnection Customer’s post Facilities SERVICE AGREEMENT NO. 2557 Study modifications to the Interconnection Customer’s Interconnection Facilities, and Good Utility Practice. The Interconnection Customer shall submit all engineering design and electrical specifications associated with the Interconnection Customer’s Interconnection Facilities to the Connecting Transmission Owner for its review and acceptance in accordance with the ESBs and Project Specific Specifications. The metering of any redundant or standby station service provisions at the Xxxxxxxxx Solar Collector Substation shall be added in accordance with the Connecting Transmission Owner’s retail tariff, P.S.C. No. 220, and the Connecting Transmission Owner’s ESB 750. As per the Project Specific Specifications, the Interconnection Customer will install the RTU provided by Connecting Transmission Owner in accordance with Connecting Transmission Owner’s ESBs, indoors and within 15 feet of the meter(s), and remote from: • heavy traffic areas, work areas, and loading areas; • heat producing or high electrostatic or electromagnetic field producing equipment; and • station batteries. (Note: If no indoor facility is available, then installation of the RTU and revenue metering equipment in a dedicated, weatherproof, heated cubicle (accessible only to Connecting Transmission Owner) is acceptable.) For the revenue metering, the Interconnection Customer shall install a meter panel in accordance with the Project Specific Specifications, ESB 752 and ESB 750. The Interconnection Customer shall mount the revenue metering CT/PT units, make grounding connections, and complete all primary wiring. The Interconnection Customer shall install the meter socket enclosure near the Connecting Transmission Owner’s RTU in accordance with the Project Specific Specifications. Additional right-of-way (“ROW”) will be required for the construction, operation, and maintenance of the Line 301 Tap and must accommodate the 125’ x 125’ work pads required for the installation of the new structures. The Interconnection Customer is responsible for obtaining the property/easements needed for the Line 301 Tap line, access roads to/from the Line 301 Tap, and work pads, in accordance with the standards set forth in the Connecting Transmission Owner’s Standards and Requirements Relating to Third Party Acquisition and Transfer of Real Property Interests to Niagara Mohawk Power Corporation for Electric Facilities and Survey Specifications (January 2019). The Interconnection Customer is responsible for all permitting. Upon termination of this Agreement, Interconnection Customer shall be responsible for all costs associated with the decommissioning and removal of the Connecting Transmission Owner’s Interconnection Facilities.
Maintenance and Operation Member-Generator agrees to maintain their system and facilities in accordance with applicable manufacturer's recommended maintenance schedule and standard prudent engineering practices. Member-Generator covenants and agrees to operate their system, facilities and equipment so as to minimize the likelihood for a malfunction or other disturbance, damaging or otherwise affecting or impairing Cooperative’s electrical system. Member-Generator shall comply with all applicable laws, regulations, zoning, building codes, safety rules and other environmental regulations or restrictions applicable to the design, installation, operation and maintenance of the Member-Generator's System. Member-Generator must, at least once every year, conduct a test to confirm that Member-Generator’s System automatically ceases to energize the output (interconnection equipment output voltage goes to zero) within two (2) seconds of being disconnected from Cooperative’s electrical system. Disconnecting the Member-Generator’s System from Cooperative’s electrical system at the visible disconnect switch and measuring the time required for the unit to cease to energize the output shall satisfy this test. Member-Generator shall maintain a record of the results of these tests and, upon request by Cooperative, shall provide a copy of the test results to Cooperative. If Member-Generator is unable to provide a copy of the test results upon request, Cooperative shall notify Member- Generator by mail that Member-Generator has thirty (30) days from the date Member-Generator receives the request to provide Cooperative with the results of a test. If Member-Generator does not provide Cooperative with the test results within the thirty (30) day time period or if the test results provided to Cooperative show that Member-Generator’s net metering unit is not functioning correctly, Cooperative may immediately disconnect Member-Generator’s System from Cooperative’s electrical system. If Member-Generator’s equipment ever fails this test, Member-Generator shall immediately disconnect Member-Generator’s System from Cooperative's electrical system. Member-Generator’s System shall not be reconnected to Cooperative's electrical system by the Member-Generator until Member-Generator’s System is repaired and operating in a normal and safe manner. Cooperative shall have the right to have a representative present and informed when any such tests are conducted. Cooperative does not warrant the testing procedures or results by the presence of its representative. Member-Generator is responsible for protecting their equipment from transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits, and from any other causes or events. Therefore, Cooperative shall not be responsible for damage to Member-Generator’s equipment allegedly caused by transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits or other causes or events. Member-Generator agrees to notify Cooperative no less than thirty (30) days prior to modification of the components or design of the Member-Generator’s System that in any way may degrade or significantly alter the System’s output characteristics. Member-Generator acknowledges that any such modifications will require submission of a new Application and Agreement to Cooperative.
Scope and Purpose 1.01 This document is intended to set out general guidelines and principles regarding child welfare sector integrations during the term of this agreement which are mandated by the Ministry and for which local Human Resources Adjustment Plans (HRAP) are required to be negotiated. Subject to the following terms, these principles will serve as the framework for the treatment of bargaining unit employees and will apply to subsequent negotiations with unions, as may be required, as part of an integration arising within the context of the Ontario Labour Relations Act (OLRA) or PSLRTA, whichever is applicable.
SCOPE AND RECOGNITION 2.01 The Employer recognizes the Union as the sole bargaining agent on behalf of the employees for whom the Union has been certified as bargaining agent with respect to wages, hours of work, terms and conditions of employment during the life of this Agreement.
