Seasonal - Import GM Sample Clauses

Seasonal - Import GM. (i) [***]. (ii) [***]. (iii) [***]. (iv) [***]. (v) [***].
Sample 1
AutoNDA by SimpleDocs

Related to Seasonal - Import GM

  • Interconnection Customer’s Interconnection Facilities The Interconnection Customer shall design, procure, construct, install, own and/or control the Interconnection Customer’s Interconnection Facilities described in Appendix A at its sole expense.

  • Shipments The Vendor shall ship, deliver or provide ordered products or services within a commercially reasonable time after the receipt of the order from the TIPS Member. If a delay in said delivery is anticipated, the Vendor shall notify TIPS Member as to why delivery is delayed and shall provide an estimated time for completion of the order. TIPS or the requesting entity may cancel the order if estimated delivery time is not acceptable or not as agreed by the parties.

  • Interconnection Customer (1) Interconnection Customer shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: None (2) In the event that, in accordance with the Interconnection Construction Service Agreement, Interconnection Customer has exercised the Option to Build, it is hereby permitted to build in accordance with and subject to the conditions and limitations set forth in that Section, the following portions of the Transmission Owner Interconnection Facilities which constitute or are part of the Customer Facility: None Ownership of the facilities built by Interconnection Customer pursuant to the Option to Build shall be as provided in the Interconnection Construction Service Agreement.

  • DELIVERY, STORAGE, AND HANDLING The Contractor shall be responsible to inspect all components on delivery to ensure that no damage occurred during shipping or handling for furnish and installation projects. For equipment only purchases, the ordering entity shall be responsible to inspect all components on delivery. Materials must be stored in original undamaged packaging in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism, and theft until ready for installation.

  • Terminal Pay Any employee at normal retirement or his/her beneficiary if service is terminated by death, shall be provided terminal pay. Such terminal pay shall not exceed an amount determined as follows: 1. During the first three (3) years of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 35 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 35 percent times the number of days of accumulated sick leave earned after July 1, 1994. 2. During the fourth (4th) through sixth (6th) years of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 40 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 40 percent times the number of days of accumulated sick leave earned after July 1, 1994. 3. During the seventh (7th) through ninth (9th) years of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 45 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 45 percent times the number of days of accumulated sick leave earned after July 1, 1994. 4. During the tenth (10th) through the twelfth (12th) year of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 50 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 50 percent times the number of days of accumulated sick leave earned after July 1, 1994. 5. During and after the thirteenth (13th) year of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned* multiplied by the number of days of accumulated sick leave earned. 6. No employee who meets the eligibility requirements listed above may receive any compensation for sick leave payments unless they sign and execute the Payment of Sick Leave Upon Retirement Agreement provided by the Superintendent. This Agreement requires the retiring Board employee to seek, accept, and cash the first retirement benefit check issued by the Florida Retirement System. The employee must qualify for “normal retirement” which under this policy shall mean retirement under plan A, B, C, D, E under the Florida Retirement System or any other plan established by the Legislature with either full or reduced benefits as provided by law. Normal retirement shall not be interpreted to include disability retirement. *Note: “At the time sick leave is earned” shall be interpreted to mean the value of sick leave at the end of each school year or at the time the affected employee retires, whichever comes first.

  • Interconnection Facilities 4.1.1 The Interconnection Customer shall pay for the cost of the Interconnection Facilities itemized in Attachment 2 of this Agreement. The NYISO, in consultation with the Connecting Transmission Owner, shall provide a best estimate cost, including overheads, for the purchase and construction of its Interconnection Facilities and provide a detailed itemization of such costs. Costs associated with Interconnection Facilities may be shared with other entities that may benefit from such facilities by agreement of the Interconnection Customer, such other entities, the NYISO, and the Connecting Transmission Owner. 4.1.2 The Interconnection Customer shall be responsible for its share of all reasonable expenses, including overheads, associated with (1) owning, operating, maintaining, repairing, and replacing its own Interconnection Facilities, and

  • Interconnection Customer Authority Consistent with Good Utility Practice, this LGIA, and the CAISO Tariff, the Interconnection Customer may take actions or inactions with regard to the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities during an Emergency Condition in order to (i) preserve public health and safety, (ii) preserve the reliability of the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities,

  • Traffic Measurement and Billing over Interconnection Trunks 6.1 For billing purposes, each Party shall pass Calling Party Number (CPN) information on at least ninety-five percent (95%) of calls carried over the Interconnection Trunks. 6.1.1 As used in this Section 6, “Traffic Rate” means the applicable Reciprocal Compensation Traffic rate, Measured Internet Traffic rate, intrastate Switched Exchange Access Service rate, interstate Switched Exchange Access Service rate, or intrastate/interstate Tandem Transit Traffic rate, as provided in the Pricing Attachment, an applicable Tariff, or, for Measured Internet Traffic, the FCC Internet Order. 6.1.2 If the originating Party passes CPN on ninety-five percent (95%) or more of its calls, the receiving Party shall xxxx the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. For any remaining (up to 5%) calls without CPN information, the receiving Party shall xxxx the originating Party for such traffic at the Traffic Rate applicable to each relevant minute of traffic, in direct proportion to the minutes of use of calls passed with CPN information. 6.1.3 If the originating Party passes CPN on less than ninety-five percent (95%) of its calls and the originating Party chooses to combine Reciprocal Compensation Traffic and Toll Traffic on the same trunk group, the receiving Party shall xxxx the higher of its interstate Switched Exchange Access Service rates or its intrastate Switched Exchange Access Services rates for all traffic that is passed without CPN, unless the Parties agree that other rates should apply to such traffic. 6.2 At such time as a receiving Party has the capability, on an automated basis, to use such CPN to classify traffic delivered over Interconnection Trunks by the other Party by Traffic Rate type (e.g., Reciprocal Compensation Traffic/Measured Internet Traffic, intrastate Switched Exchange Access Service, interstate Switched Exchange Access Service, or intrastate/interstate Tandem Transit Traffic), such receiving Party shall xxxx the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. If the receiving Party lacks the capability, on an automated basis, to use CPN information on an automated basis to classify traffic delivered by the other Party by Traffic Rate type, the originating Party will supply Traffic Factor 1 and Traffic Factor

  • Interconnection Customer Drawings Within one hundred twenty (120) days after the date of Initial Operation, unless the Interconnection Parties agree on another mutually acceptable deadline, the Interconnection Customer shall deliver to the Transmission Provider and the Interconnected Transmission Owner final, “as-built” drawings, information and documents regarding the Customer Interconnection Facilities, including, as and to the extent applicable: a one-line diagram, a site plan showing the Customer Facility and the Customer Interconnection Facilities, plan and elevation drawings showing the layout of the Customer Interconnection Facilities, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Interconnection Customer's step-up transformers, the facilities connecting the Customer Facility to the step-up transformers and the Customer Interconnection Facilities, and the impedances (determined by factory tests) for the associated step-up transformers and the Customer Facility. As applicable, the Interconnection Customer shall provide Transmission Provider and the Interconnected Transmission Owner specifications for the excitation system, automatic voltage regulator, Customer Facility control and protection settings, transformer tap settings, and communications.

  • Scheduled Downtime For the purposes of this Agreement, Scheduled Downtime will mean those hours, as determined by us but which will not occur between the hours of 9:00 AM and 5:00 PM Eastern Time, Monday through Friday without your authorization or unless exigent circumstances exist, during which time we will perform scheduled maintenance or adjustments to the Environment. We will use our best efforts to provide you with at least twenty-four (24) hours of notice prior to scheduling Scheduled Downtime.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!