Selection of Manufacturing Sites Sample Clauses

Selection of Manufacturing Sites. Cempra expressly reserves the right to select, and subsequently change, at its sole discretion, the facility(ies) at which Supplied Compound or Clinical Supply will be manufactured. Cempra will provide, not less than [*] calendar months prior to the first supply of Supplied Compound from any site(s) other than any site(s) previously permitted hereunder, written notice to Toyama if the manufacturing of any Supplied Compound is to be shifted to any site other than any site(s) specifically approved therefor, if any, in any applicable Drug Application or Regulatory Approval in the Territory for such Supplied Compound’s corresponding Finished Product; Cempra shall not be required to provide any advance written notice for any changes of manufacturing facility(ies) with respect to any Clinical Supply, provided however, Cempra shall provide Toyama with a written notice following any changes of such manufacturing facility(ies). Notwithstanding the preceding portions of this Section 5.5, however, Cempra shall use Commercially Reasonable Efforts to ensure that its selection or change of manufacturing sites will not materially and adversely affect its ability to fulfill its then current supply obligations to Toyama pursuant to this Agreement. Upon Toyama’s written request, Cempra shall submit to Toyama manufacturing capacity and forecast of the manufacturing sites of Supplied Compound to the extent Toyama can evaluate an adverse effect on Cempra’s supply obligations to Toyama. In the event that Cempra makes a change of manufacturing sites that Cempra reasonably anticipates may materially and adversely affect Cempra’s ability to fulfill its obligations under this Agreement, then Cempra shall, at its own risk of loss, use Commercially Reasonable Efforts to stockpile sufficient quantities of such Supplied Compound to minimize such adverse effect. Cempra may source any Supplied Compound and/or Clinical Supply from multiple facilities without prior notice to Toyama, provided however, Cempra shall provide Toyama with a written notice following such decision to source any Supplied Compound and/or Clinical Supply from multiple facilities. All Supplied Compound shall be manufactured and supplied to Toyama in compliance with cGMP, this Agreement and Applicable Law. In the event that Cempra changes or adds a Facility for Clinical Supply or, as described in this Section 5.5, any Supplied Compound, such newly selected or added facility shall be deemed a Facility for Clinical Suppl...
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Selection of Manufacturing Sites

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Manufacturing Rights Manufacturing Rights will be governed by Attachment 6.

  • Manufacture of Product Prior to commercialization of the Product, the Parties may, if appropriate for both parties, negotiate in good faith a manufacturing and supply agreement to provide for Licensor to fulfill the manufacturing requirements of Licensee for Product for sale in the European market. The cost of such manufacturing shall not be greater than * percent (*%) of the cost of any competitor cGMP contract manufacturing facility that proposes to manufacturer the Product for Licensee. * Confidential information has been omitted and filed confidentially with the Securities and Exchange Commission.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • Review of Materials During the term of this Agreement, Client shall ensure that all prospectuses, statements of additional information, registration statements, proxy statements, reports to shareholders, advertising and sales literature or other materials prepared for distribution to Fund shareholders or the public, which refer to the Subadviser in any way, prepared by employees or agents of Client or its affiliates are consistent with information previously provided by Subadviser. Subadviser shall promptly notify the Client of any changes to information pertaining to the Subadviser and stated in the materials described in this Section 6(g).

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.

  • Manufacturing Costs Patheon shall be allowed to adjust the Fees: (i) for costs associated with the conversion of Granulations and Components into Drug Product (the “Conversion Costs”) in respect of the Drug Product based on the most recently available final Producers’ Price Index for Pharmaceutical Product as published by the U.S. Bureau of Labor Statistics or any governmental successor thereto (“PPI”) using the procedure set forth in Section 4.3 and (ii) for Component Costs to pass on the actual amount of any increase or decrease in such costs without xxxx-up. For each Contract Year in which Patheon is entitled to adjust the Fees Patheon shall provide Client with written notice of any change in the Fees within 30 days of receipt by Patheon of the Annual Forecast. The Parties agree that the Fees shall not be adjusted more than once per Contract Year, however this limitation shall not include price adjustments under section 4.3 or 4.4. In addition, notwithstanding anything herein to the contrary, Manufacturing Fees associated with Conversion Costs shall not be increased by greater than [***]% per annum in any Contract Year during the Term. There shall be no similar limitation in terms of increases in Component Costs which shall be passed on to Client in an amount equal to the actual increase paid by Patheon without markup.

  • Combination Products If a LICENSED PRODUCT is sold to any third party in combination with other products, devices, components or materials that are capable of being sold separately and are not subject to royalties hereunder (“OTHER PRODUCTS,” with the combination of products being referred to as “COMBINATION PRODUCTS” and the Other Product and Licensed Product in such Combination Product being referred to as the “COMPONENTS”), the NET SALES of such LICENSED PRODUCT included in such COMBINATION PRODUCT shall be calculated by multiplying the NET SALES of the COMBINATION PRODUCT by the fraction A/(A+B), where A is the average NET SALES price of such LICENSED PRODUCT in the relevant country, as sold separately, and B is the total average NET SALES price of all OTHER PRODUCTS in the COMBINATION PRODUCT in the relevant country, as sold separately. If, in any country, any COMPONENT is not sold separately, NET SALES for royalty determination shall be determined by the formula [C / (C+D)], where C is the aggregate average fully absorbed cost of the Licensed Product components during the prior Royalty Period and D is the aggregate average fully absorbed cost of the other essential functional components during the prior Royalty Period, with such costs being determined in accordance with generally accepted accounting principles. To the extent that any SUBLICENSE INCOME relates to a COMBINATION PRODUCT or is otherwise calculated based on the value of one or more licenses or intellectual property rights held by the COMPANY, an AFFILIATE or SUBLICENSEE, COMPANY shall determine in good faith and report to THE PARTIES the share of such payments reasonably attributable to COMPANY’s or such AFFILIATE’s sublicense of the rights granted hereunder, based upon their relative importance and proprietary protection, which portion shall be the SUBLICENSE INCOME. THE PARTIES shall have the right to dispute such sharing determination in accordance with the dispute provisions of the AGREEMENT.

  • Clinical Supply Takeda will provide to Licensee[***] the amount of TAK-385 Licensed Compound or TAK-385 Licensed Products needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan (estimated by Licensee as of the Effective Date to be [***]), solely to the extent that Takeda can supply such TAK-385 [***] = Portions of this exhibit have been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment requested under 17 C.F.R. Sections 200.80(b)(4) and 230.406. Licensed Compound or TAK-385 Licensed Products (a) from its supply of TAK-385 Licensed Compound or TAK-385 Licensed Products in existence as of the Effective Date and which supply can be used for its intended purposes without further re-processing (the “Initial Clinical Supply”) and (b) after retaining the amount needed by Takeda for Clinical Trials in the Takeda Territory. Takeda will also provide to Licensee, at [***] any additional supplies of TAK-385 Licensed Compound or TAK-385 Licensed Products in excess of the Initial Clinical Supply needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan. Within [***] days after the Effective Date, the Parties will enter into a manufacturing and supply agreement (the “Takeda Clinical Manufacturing and Supply Agreement”), which will govern the terms and conditions of the Manufacturing and supply of the TAK-385 Licensed Compound and TAK-385 Licensed Products (including the Initial Clinical Supply) by Takeda to Licensee for Development purposes, including the exact quantities and the timelines for delivery. The Parties will negotiate the terms and conditions of such Takeda Clinical Manufacturing and Supply Agreement in good faith for a period of [***] days (as may be extended upon agreement of the Parties). As part of the negotiation related to the Takeda Clinical Manufacturing and Supply Agreement, the Parties shall discuss in good faith the ability of Takeda to supply to Licensee [***]. If the Parties have not entered into a definitive agreement within such negotiation period, then the final terms and conditions of such agreement will be resolved in accordance with Section 8.2 (Arbitration for Failure to Agree).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!