Design Phase All Basic Services set forth in the Agreement with the exception of Interdisciplinary Document Coordination Review, conducting a Card Trick session, Value-Engineering services, Estimating services. • All Basic Services set forth in the Agreement. • All Basic Services set forth in the Agreement. • All Basic Services set forth in the Agreement.
Project Completion Report At the completion of construction and once a Project is placed in service, the Subrecipient must submit a Project Completion Report that includes the total number of units built and leased, affordable units built and leased, DR-MHP units built and leased, an accomplishment narrative, and the tenants names, demographics and income for each DR-MHP unit.
Certificate of Completion The Interconnection Customer shall provide the EDC with a completed copy of the Interconnection Agreement Certificate of Completion, including evidence of the electrical inspection performed by the local authority having jurisdiction. The evidence of completion of the electrical inspection may be provided on inspection forms used by local inspecting authorities. The Interconnection request shall not be finally approved until the EDC’s representative signs the Interconnection Agreement Certificate of Completion.
Notice of Completion The Interconnection Customer shall notify the Transmission Provider and the Interconnected Transmission Owner in writing when it has completed construction of (i) the Customer Facility;
Schematic Design Phase 1.2.1 Based on the mutually agreed upon Program of Requirements, Amount Available for the Construction Contract and the Project Schedule, the Architect/Engineer shall prepare sufficient alternative approaches utilizing BIM for design and construction of the Project to satisfy Owner’s project requirements and shall, at completion of this phase, submit Schematic Design Documents derived from the model in accordance with the BIM Execution Plan, “Facility Design Guidelines” and any additional requirements set forth in Article 15. The Architect/Engineer shall review alternative approaches to design and construction for the Project as they are being modeled at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by the Owner within the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Schematic Design. The Architect/Engineer shall provide the Construction Manager with a compact disc containing documents and data files derived from the model to assist the Construction Manager in fulfilling its responsibilities to the Owner.
1.2.2 Architect/Engineer shall provide all services necessary to perform the services of this phase (preparation of model(s), relevant data, decision support model views and Schematic Design Documents) including, without limitation, unless otherwise approved by Owner, the preparation and prompt delivery of all items specified in the BIM Execution Plan and “Facility Design Guidelines”.
1.2.3 Architect/Engineer shall work closely with Owner in preparation of schematic drawings and shall specifically conform to Owner’s requirements regarding aesthetic design issues.
1.2.4 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments.
1.2.5 Before proceeding into the Design Development Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Schematic Design documents and approval of the Architect/Engineer’s preliminary Estimated Construction Cost and schedule.
1.2.6 The Architect/Engineer shall participate in a final review of the Schematic Design Documents and model(s) with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Schematic Design Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments, any of which may be appealed for good cause.
Acceptance Certificate Lessee hereby represents, warrants and certifies (a) that the Equipment described herein has been delivered to and inspected by Lessee, is in good order, repair and condition, and is of a size, design, capacity and manufacturer acceptable and satisfactory to Lessee and is unconditionally and irrevocably accepted for lease by Lessee under this Rental Schedule and the Master Lease as incorporated herein by reference, as of the Interim Term Commencement Date set forth above; and (b) the representations and warranties of Lessee set forth in the Master Lease are true and correct as of the date hereof.
Drawings and Specifications 9.1 A complete list of all Drawings that form a part of the Contract Documents are to be found as an index on the Drawings themselves, and/or may be provided to Developer and/or in the Table of Contents.
9.2 Materials or Work described in words that so applied have a well-known technical or trade meaning shall be deemed to refer to recognized standards, unless noted otherwise.
9.3 Trade Name or Trade Term It is not the intention of the Contract Documents to go into detailed descriptions of any materials and/or methods commonly known to the trade under “trade name” or “trade term.” The mere mention or notation of “trade name” or “trade term” shall be considered a sufficient notice to Developer that it will be required to complete the work so named, complete, finished, and operable, with all its appurtenances, according to the best practices of the trade.
9.4 The naming of any material and/or equipment shall mean furnishing and installing of same, including all incidental and accessory items thereto and/or labor therefor, as per best practices of the trade(s) involved, unless specifically noted otherwise.
9.5 Contract Documents are complementary, and what is called for by one shall be binding as if called for by all. As such, Drawings and Specifications are intended to be fully cooperative and to agree. However, if Developer observes that Drawings and Specifications are in conflict with the Contract Documents, Developer shall promptly notify District and Architect in writing, and any necessary changes shall be made as provided in the Contract Documents.
9.6 Figured dimensions shall be followed in preference to scaled dimensions, and Developer shall make all additional measurements necessary for the work and shall be responsible for their accuracy. Before ordering any material or doing any work, each Developer shall verify all measurements at the building and shall be responsible for the correctness of same.
9.7 Should any question arise concerning the intent or meaning of the Contract Documents, including the Plans and Specifications, the question shall be submitted to the District for interpretation. If a conflict exists in the Contract Documents, these Construction Provisions shall control over the Facilities Lease, which shall control over the Site Lease, which shall control over Division 1 Documents, which shall control over Division 2 through Division 49 documents, which shall control over figured dimensions, which shall control over large-scale drawings, which shall control over small-scale drawings. In no case shall a document calling for lower quality and/or quantity of material or workmanship control. However, in the case of discrepancy or ambiguity solely between and among the Drawings and Specifications, the discrepancy or ambiguity shall be resolved in favor of the interpretation that will provide District with the functionally complete and operable Project described in the Drawings and Specifications.
9.8 Drawings and Specifications are intended to comply with all laws, ordinances, rules, and regulations of constituted authorities having jurisdiction, and where referred to in the Contract Documents, the laws, ordinances, rules, and regulations shall be considered as a part of the Contract Documents within the limits specified.
9.9 As required by Section 4-317(c), Part 1, Title 24, CCR: “Should any existing conditions such as deterioration or non-complying construction be discovered which is not covered by the DSA-approved documents wherein the finished work will not comply with Title 24, California Code of Regulations, a construction change document, or a separate set of plans and specifications, detailing and specifying the required repair work shall be submitted to and approved by DSA before proceeding with the repair work.”
Tenant Estoppels (a) Each Seller shall prepare and deliver to each Tenant at such Seller’s Property an estoppel certificate in the form of Exhibit A attached hereto (the “Tenant Estoppel”) and request each such Tenant to execute and deliver the Tenant Estoppel to such Seller. Each Seller shall use commercially reasonable efforts to obtain the prompt return of the executed Tenant Estoppels in substantially the same form as Exhibit A attached hereto from each Tenant at such Seller’s Property prior to the Closing, without the obligation to make any payments or grant any concessions under the Leases. If a Tenant returns an executed Tenant Estoppel (or Lease Required Estoppel or Statement of Lease as defined below) to such Seller, such Seller shall promptly deliver to the Buyer, or make available on Seller’s transaction website, a copy of such executed Tenant Estoppel (or Lease Required Estoppel or Statement of Lease, if applicable) following such Seller’s receipt of such Tenant Estoppel (or Lease Required Estoppel or Statement of Lease, if applicable).
(b) In the event that the Closing hereunder shall occur simultaneously with the Initial Closing, it shall be a condition to the Buyer’s obligation to close the sale and purchase of the Transferred Assets that, on or before the Initial Closing Date, the Sellers deliver to the Buyer from Tenants (other than the GSA and the Tenants of the properties associated with the LLC Interests and the Partnership Interests (as each such term is defined in the Master PSA), unless the applicable joint venture partner elects to sell all of its interest in the applicable joint venture entity and separate agreements for the sale of such properties to the Buyer are entered into as contemplated in Section 3.9(a)(y) and Section 3.9(b)(y), respectively, of the Master PSA) whose Leases comprise at least seventy-five percent (75%) of remaining base rental income over the lease term as of the date of this Agreement as determined in accordance with the schedule delivered by the Sellers to the Buyer prior to the date hereof, signed tenant estoppel certificates that are substantially in the form of either (1) the Tenant Estoppel or (1) except with respect to ROFO Documents and ROFR Documents (for which Tenant Estoppels, and not Lease Required Estoppels, shall be required), with respect to those Leases that contain a required form of specific estoppel that is attached as an exhibit to such Lease, the form of estoppel attached to such Lease (each, a “Lease Required Estoppel”); provided, however, that Buyer may, in its sole discretion, in order to accommodate Serial Closings pursuant to the Master PSA, waive the requirement set forth in this Section 3.4(b), which shall also constitute a waiver of such corresponding requirement in each Other PSA (and in such event, Seller shall be under no obligation to provide a Sellers’ Estoppel Certificate). For purposes of this Section 3.4(b) only, the terms “Tenants” and “Leases” shall refer to the Tenants and the Leases in respect of the Properties to be purchased and sold pursuant to this Agreement and the “Tenants” and “Leases” (as each such term is defined in each of the Other PSAs) in respect of the “Properties” (as such term is defined in each of the Other PSAs) to be purchased and sold pursuant to each Other PSA, collectively. No Tenant Estoppel or Lease Required Estoppel shall be dated earlier than forty-five (45) days prior to the Initial Closing Date and no such estoppel shall allege any material defaults by the Sellers (except to the extent any such default has been disclosed in writing by the Sellers to the Buyer as of the date of this Agreement) or accrued and outstanding offsets or defenses under the relevant Lease or contain any materially adverse deviations between (A) the information specified in said Tenant Estoppel or Lease Required Estoppel, as applicable, and (B) (x) the representations and warranties of the Sellers set forth in this Agreement or (y) the Leases to which such Tenant Estoppel or Lease Required Estoppel, as applicable, relate. Notwithstanding anything to the contrary in this Section 3.4, Sellers shall also use commercially reasonable efforts to obtain a Statement of Lease from the GSA with respect to each Lease to which the GSA is a party. The Buyer shall cooperate with the Sellers to obtain (i) any novation of the applicable Lease with the GSA that may be required by the GSA in order to assign the applicable Lease to the Buyer or its applicable Designated Subsidiary and (ii) any Statement of Lease. In the event the GSA requires any Seller to remain liable under the applicable Lease with the GSA after the Closing Date, the Buyer hereby agrees to indemnify and hold harmless each such Seller against any Losses (as defined below) arising out of such Lease after the Closing Date except to the extent such Losses are the result of any action taken by any such Seller or its Affiliates with respect to such Leases with the GSA.
Tenant Estoppel Certificates (a) Seller agrees from and after receipt of the Assumption Approval as set forth in Section 9.1 and provided this Agreement is in full force and effect, within five (5) business days after being requested by Purchaser to do so, to deliver to all tenants of the Property a request for an estoppel certificate in the form of EXHIBIT D attached hereto, which form may be revised if so requested by the Existing Lender. The parties agree that, subject to the provisions of subparagraph (b) below, it shall be a condition to Purchaser's obligation to close under this Agreement that an estoppel certificate either substantially in the form of EXHIBIT D or in the form required by a tenant's Lease, dated not earlier than ten (10) business days prior to the Closing Date, be delivered to Purchaser no later than five (5) business days before Closing from tenants under the Leases occupying, in the aggregate, not less than 75% of the rentable area of the Property, including all tenants occupying at least a full floor or more of space (a "TENANT ESTOPPEL"), Seller agrees to use good faith efforts to obtain such Tenant Estoppels, provided however, Seller shall not be obligated to pay tenants in order to do so. Notwithstanding the foregoing, if at Closing Seller delivers such Tenant Estoppels from tenants occupying at least 60% of the rentable area of the Property, Seller may execute and deliver to Purchaser, at Closing, its own certificate with respect to tenants occupying up to an additional 15% of the rentable area of the Property (substantially in the form of EXHIBIT D or in the form required by a tenant's Lease, appropriately modified to reflect that they are certificates of Seller and made to Seller's knowledge; hereinafter, the "SELLER'S ESTOPPEL CERTIFICATE") and the statements of Seller contained therein shall survive the Closing until the earlier of (a) one hundred and eighty (180) days after Closing, or (b) the date Purchaser obtains an estoppel certificate from a tenant for whom Seller delivered a Seller's Estoppel Certificate.
(b) The parties agree that each Tenant Estoppel containing non-material exceptions, qualifications or modifications shall be deemed to be an acceptable estoppel certificate for purposes of this Section 7.4.5. In the event a Tenant Estoppel contains a material exception or qualification or alleges a material default by Seller (collectively, a "MATERIAL DEFAULT"), subject to the following provisions of this Section 7.4.5), Purchaser's sole and exclusive remedy shall be to terminate this Agreement by delivering notice thereof in writing to Seller, on the earlier of five (5) business days after the date of delivery to Purchaser of a Tenant Estoppel alleging a Material Default or the Closing Date (the "ESTOPPEL TERMINATION NOTICE"), time being of the essence as to the giving of such notice. If Purchaser shall timely give the Estoppel Termination Notice, then subject to Seller's option set forth below, this Agreement shall terminate, and upon such termination, Purchaser shall be entitled to the return of the Deposit Note and all interest thereon, and neither party shall have any obligation hereunder other than as may be expressly provided for in this Agreement. Notwithstanding the foregoing, Purchaser shall not have the right to terminate this Agreement if Tenant Estoppel(s) allege Material Default(s) if (x) such Material Default(s) can be remedied by the performance of work costing not more than $50,000 in the aggregate for all such Tenant Estoppel(s) or the payment of money not exceeding $50,000 in the aggregate with respect to such tenants and (y) Seller elects (by written notice to Purchaser given simultaneously with Seller's delivery of such Tenant Estoppel to Purchaser), at Seller's option (but Seller shall have no obligation), to cure the nonconforming matter set forth in such estoppel by either performing or causing to be performed the work on or prior to the Closing Date, by paying the money on or prior to the Closing Date, or by granting Purchaser a credit against the Purchase Price in an amount reasonably necessary to perform such work, as reasonably determined by Seller and Purchaser, in which event Seller shall, at or before the Closing, cure, perform, pay or grant Purchaser a credit with respect to the same.
Invoice Certification When and if requested by DXC, as a condition precedent to payment thereof, Supplier shall separately certify each invoice as follows: “We certify that contract deliverables listed hereon were produced in compliance with all applicable requirements of Sections 6, 7, and 12 of the Fair Labor Standards Act, as amended, and of regulations and orders of the U.S. Department of Labor issued under Section 14 thereof. We further certify that any and all additional contract deliverables will be produced in compliance with same.”
