Simplified Response. If you don’t need PEPPOL BIS3 advanced responses you can select simplified response format.
Simplified Response Sample Clauses
Related to Simplified Response
Timely and Sustained Response Interconnection Customer shall ensure that the Small Generating Facility’s real power response to sustained frequency deviations outside of the deadband setting is automatically provided and shall begin immediately after frequency deviates outside of the deadband, and to the extent the Small Generating Facility has operating capability in the direction needed to correct the frequency deviation. Interconnection Customer shall not block or otherwise inhibit the ability of the governor or equivalent controls to respond and shall ensure that the response is not inhibited, except under certain operational constraints including, but not limited to, ambient temperature limitations, physical energy limitations, outages of mechanical equipment, or regulatory requirements. The Small Generating Facility shall sustain the real power response at least until system frequency returns to a value within the deadband setting of the governor or equivalent controls. An Applicable Reliability Standard with equivalent or more stringent requirements shall supersede the above requirements.
Employee Response The employee upon whom a Notice of Proposed Action has been served shall have seven (7) calendar days to respond to the appointing authority either orally or in writing before the proposed action may be taken. Upon request of the employee and for good cause, the appointing authority may extend in writing the period to respond. If the employee's response is not filed within seven (7) days or during an extension, the right to respond is lost.
Firm Response The Department should make an award within sixty (60) days after the date of the opening, during which period responses shall remain firm and shall not be withdrawn. If award is not made within sixty (60) days, the response shall remain firm until either the Department awards the Contract or the Department receives from the bidder written notice that the response is withdrawn. Any response that expresses a shorter duration should, in the Department's sole discretion, be accepted or rejected.
Line Item Question Response 43 Do your warranties cover all products, parts, and labor? Axon warrants that its law enforcement hardware products which are manufactured by Axon are free from defects in workmanship and materials for a period of one (1) year from the date of receipt. Axon-manufactured accessories are covered under a limited ninety-day warranty from the date of receipt. Non-Axon manufactured accessories are covered under the manufacturer's warranty. There are extended warranties available as defined in the Axon Master Services and Purchasing Agreement (MSPA). NON-AXON MANUFACTURED PRODUCTS For some solutions we are authorized resellers of hardware (Cradlepoint routers for Axon Fleet, Axis cameras for Axon Interview, etc.). Products that we are authorized to resell abide by the manufacturer's warranty. Further details can be provided upon request. * 44 Do your warranties impose usage restrictions or other limitations that adversely affect coverage? Restrictions are outlined in our warranty, which has been included in the uploaded attachments. * 45 Do your warranties cover the expense of technicians' travel time and mileage to perform warranty repairs? Our warranties do not cover the expense of technicians' travel time and mileage to perform warranty repairs. * 46 Are there any geographic regions of the United States (and Canada, if applicable) for which you cannot provide a certified technician to perform warranty repairs? How will Sourcewell Members in these regions be provided service for warranty repair? Axon will be available 24 hours/7 days per week by phone for emergency technical support for any system outage, and if mutually agreed upon by both parties, we can provide onsite support for local issues. If a site visit is deemed necessary due to an issue (i.e. access point failures or accidental cut wires) and not an Axon or Axon Evidence issue there may be a charge assessed to the agency. * 47 Will you cover warranty service for items made by other manufacturers that are part of your proposal, or are these warranties issues typically passed on to the original equipment manufacturer? Axon will troubleshoot these devices to the best of our ability. If we are unable to resolve the issue and the devices require warranty service, this will be performed by the manufacturer. * 48 What are your proposed exchange and return programs and policies? Axon does not allow exchanges or returns. Please see our MSPA for full details. * 49 Describe any service contract options for the items included in your proposal. Please refer to the included MSPA. * Table 10: Payment Terms and Financing Options Line Item Question Response * 50 What are your payment terms (e.g., net 10, net 30)? Payment terms are Net 30. * 51 Do you provide leasing or financing options, especially those options that schools and governmental entities may need to use in order to make certain acquisitions? Axon does not offer leasing or financing options. Alternatively, Axon offers a provision in its MSPA which allows for cancellation by the agency if sufficient funds are not appropriated. * 52 Briefly describe your proposed order process. Include enough detail to support your ability to report quarterly sales to Sourcewell as described in the Contract template. For example, indicate whether your dealer network is included in your response and whether each dealer (or some other entity) will process the Sourcewell Members' purchase orders. Axon will process orders Axon will accept from Sourcewell members directly, as our distributor network in the United States and Canada does not sell our video products. Our Order Entry team enters orders into our CRM, Salesforce. Reports will be maintained and extracted from Salesforce for quarterly reporting to Sourcewell. *
Sweatshop Labor If this Agreement provides for the laundering of apparel, garments or corresponding accessories, or for furnishing equipment, materials, or supplies other than for public works, this section is applicable. Contractor certifies that no apparel, garments or corresponding accessories, equipment, materials, or supplies furnished to the JBE under this Agreement have been laundered or produced in whole or in part by sweatshop labor, forced labor, convict labor, indentured labor under penal sanction, abusive forms of child labor or exploitation of children in sweatshop labor, or with the benefit of sweatshop labor, forced labor, convict labor, indentured labor under penal sanction, abusive forms of child labor or exploitation of children in sweatshop labor. Contractor adheres to the Sweatfree Code of Conduct as set forth on the California Department of Industrial Relations website located at xxx.xxx.xx.xxx, and PCC 6108. Contractor agrees to cooperate fully in providing reasonable access to Contractor’s records, documents, agents, and employees, and premises if reasonably required by authorized officials of the Department of Industrial Relations, or the Department of Justice to determine Contractor’s compliance with the requirements under this section and shall provide the same rights of access to the JBE.
Government’s Response Please refer to the Q&A from the first question.
Menu of Labour Adjustment Strategies Where a work force reduction is necessary, the following labour adjustment strategies will be considered, as applicable.
DEMAND RESPONSE If Customer is enrolled in a demand response programme, Customer represents and warrants it has the intent and ability to generate and/or reduce electrical demand to achieve Accepted Capacity (as defined in the applicable Programme Rule Attachment attached to the applicable Order Form) when notified by Provider during demand response events. If Customer is enrolled in a demand response programme utilising on-site electric generation, Customer further represents and warrants that (i) it holds all licenses and/or permits that are required by applicable law for the proper participation in such demand response programme; and (ii) when responding to a demand response event, it will comply with, and be responsible for any violation of applicable law.
Primary Frequency Response Developer shall ensure the primary frequency response capability of its Large Generating Facility by installing, maintaining, and operating a functioning governor or equivalent controls. The term “functioning governor or equivalent controls” as used herein shall mean the required hardware and/or software that provides frequency responsive real power control with the ability to sense changes in system frequency and autonomously adjust the Large Generating Facility’s real power output in accordance with the droop and deadband parameters and in the direction needed to correct frequency deviations. Developer is required to install a governor or equivalent controls with the capability of operating: (1) with a maximum 5 percent droop ± 0.036 Hz deadband; or (2) in accordance with the relevant droop, deadband, and timely and sustained response settings from an approved Applicable Reliability Standard providing for equivalent or more stringent parameters. The droop characteristic shall be: (1) based on the nameplate capacity of the Large Generating Facility, and shall be linear in the range of frequencies between 59 and 61 Hz that are outside of the deadband parameter; or (2) based on an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. The deadband parameter shall be: the range of frequencies above and below nominal (60 Hz) in which the governor or equivalent controls is not expected to adjust the Large Generating Facility’s real power output in response to frequency deviations. The deadband shall be implemented: (1) without a step to the droop curve, that is, once the frequency deviation exceeds the deadband parameter, the expected change in the Large Generating Facility’s real power output in response to frequency deviations shall start from zero and then increase (for under-frequency deviations) or decrease (for over-frequency deviations) linearly in proportion to the magnitude of the frequency deviation; or (2) in accordance with an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. Developer shall notify NYISO that the primary frequency response capability of the Large Generating Facility has been tested and confirmed during commissioning. Once Developer has synchronized the Large Generating Facility with the New York State Transmission System, Developer shall operate the Large Generating Facility consistent with the provisions specified in Articles 9.5.5.1 and 9.5.5.2 of this Agreement. The primary frequency response requirements contained herein shall apply to both synchronous and non-synchronous Large Generating Facilities.
