Small Business Subcontracting Plan. Some or all of the Goods and Services provided hereunder may be used in a contract with the federal government and, therefore, may be subject to the requirements of FAR section 52.219-9. If applicable, each Supplier (except small business concerns) whose contract is expected to exceed for construction) and has subcontracting possibilities is required to submit an acceptable subcontracting plan to the Customer. The plan shall include spending goals with businesses that are defined by the U.S. Small Business Administration as small, women-owned small, veteran-owned small, service-disabled veteran-owned small, HUBZone, small disadvantaged (SDB), Alaskan Native Corporations, and Indian tribes. If the Supplier fails to submit a plan within the time limit prescribed by the Customer, Customer may terminate this Agreement. The Supplier assures that the clause entitled “Small Business Subcontracting Plan” will be included in all subcontracts, that offer further subcontracting opportunities, and all subcontractors (except small business concerns) who receive subcontracts in excess of for construction) will be required to adopt a plan similar to this plan. APPENDIX A Specifications and Schedule PROJECT SUMMARY The CM-5 Pipeline Project is a system reinforcement project for the Rochester Gas & Electric (RG&E) distribution system. The 24-inch steel pipeline will be approximately 5.1 miles in length; located wholly in the Town of Chili, New York and will traverse active agricultural, fallow field, and wetland land types. The rest of the documents as submitted through SRM tender and clarifying rounds (742303, 744586, 746379). Initial Documents: Appendix A Design Drawings.pdf Appendix B Stormwater Pollution Prevention.pdf Appendix C NYS PSC EMCSP Feb 2006.pdf Appendix D Boring Logs ND 15-4490.xlsx Appendix E Invasive Species Control Plan.pdf Appendix F Agricultural Mitigation.pdf Appendix G Article VII Construction Requir.xlsx CM-5 Construction Pay Item Descriptions.pdf CM-5 Pipeline Construction RFP Bidder Resp.xlsx CM-5 Pipeline RFP TEnderXXXXX Final Releas.pdf Gas Technical Documents.zip 20161110_CM-5 Pipeline.kmz Q&A Documents and Clarification Addenda: 4-11-2017_2 of 2_ 742303 CM5 Construciton QA form.xlsx TM5.32.10 Direct BuryTrenching.pdf Descoping Clarifications.docx APPENDIX B Agreement Sum and Payment Schedule ITEM 100 DESCRIPTION Project Start/Mobilization QTY1 Units Unit price TOTAL Lump Sum 110 24-inch Pipeline Labor Component included in Lump Sum - Tax Exempt 1 Lump Sum 120 24-inch Pipeline Material Component included in Lump Sum 1 Lump Sum 130 24-inch Pipeline Equipment Component included in Lump Sum 1 Lump Sum 140 Pipeline Alignment Field Staking Component included in Lump Sum 1 Lump Sum 150 Hauling of Pipe Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 180 R.O.W. Clearing Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 190 Erosion and Sediment Control Component included in Lump Sum (Labor Equipment, Materials) 1 Lump Sum 200 Cathodic Protection Component included in Lump Sum (Labor, Materials, Equipment) 1 Lump Sum 230 Restoration Component included in Lump Sum (Labor, Equipment, Materials) 1 Lump Sum 240 Third Party Caliper Pig Inspection Component included in Lump Sum 1 Lump Sum 250 Demobilization 1 Lump Sum 260 Balance of Bid Unclassified 1 Lump Sum 270 Rock Excavation CY 280 Imported Select Fill (Material and Trucking to Site) Ton 290 Trucking of Spoils-Clean and Regulated Materials-Project Site to Mill Seat Landfill Ton 300 Option Pricing - Add/Deduct to Extend HDD found on SH-16 south to include section and eliminate bore on SH-15, and exit south of station 207+50. If Deduct, enter negative number in Unit Price and note in Assumptions Tab. 1 Lump Sum GRAND TOTAL BID
Appears in 1 contract
Samples: Agreement
Small Business Subcontracting Plan. Some or all of the Goods and Services provided hereunder may be used in a contract with the federal government and, therefore, may be subject to the requirements of FAR section 52.219-9. If applicable, each Supplier (except small business concerns) whose contract is expected to exceed $650,000 ($1,500,000 for construction) and has subcontracting possibilities is required to submit an acceptable subcontracting plan to the Customer. The plan shall include spending goals with businesses that are defined by the U.S. Small Business Administration as small, women-owned small, veteran-owned small, service-disabled veteran-owned small, HUBZone, small disadvantaged (SDB), Alaskan Native Corporations, and Indian tribes. If the Supplier fails to submit a plan within the time limit prescribed by the Customer, Customer may terminate this Agreement. The Supplier assures that the clause entitled “Small Business Subcontracting Plan” will be included in all subcontracts, that offer further subcontracting opportunities, and all subcontractors (except small business concerns) who receive subcontracts in excess of $650,000 ($1,500,000 for construction) will be required to adopt a plan similar to this plan. Xxx Xxxxxxxxxx VP - Controler AGR Networks 12/11/2020 BToobnyFiMtazrgoenreald President & CEO 12/14/2020 APPENDIX A Specifications Owner or Company Central Maine Power Company Augusta General Xxxxxx 00 Xxxxxx Xxxxx, Xxxxxxx, Xxxxx 00000 New York State Electric & Gas Corporation 00 Xxxx Xxxxxx Xxxxxxxxx, Xxx Xxxx 00000 Rochester Gas and Schedule PROJECT SUMMARY Electric Corporation 00 Xxxx Xxxxxx Xxxxxxxxx, Xxx Xxxx 00000 UIL Holdings Corp. 000 Xxxxx Xxxx Xx, Orange, CT 06477 The CM-5 Pipeline Project United Illuminating Company Ops Center 000 Xxxxx Xxxx Xx, Orange, CT 06477 APPENDIX B Scope of Work With this proposal AVANGRID is a system reinforcement project soliciting pricing for the basic routine Electric Construction Services for Transmission, Overhead Distribution, Civil Underground Distribution and Substation facilities based on Electric Construction PayCUs for all four of its Network Affiliates: Central Maine Power, New York State Electric and Gas, Rochester Gas & Electric (RG&E) distribution systemand United Illuminating. The 24In addition, Fully-inch steel pipeline will be approximately 5.1 miles in length; located wholly in the Town of Chili, New York and will traverse active agricultural, fallow field, and wetland land types. The rest of the documents as submitted through SRM tender and clarifying rounds (742303, 744586, 746379). Initial Documents: Appendix A Design Drawings.pdf Appendix B Stormwater Pollution Prevention.pdf Appendix C NYS PSC EMCSP Feb 2006.pdf Appendix D Boring Logs ND 15-4490.xlsx Appendix E Invasive Species Control Plan.pdf Appendix F Agricultural Mitigation.pdf Appendix G Article VII Construction Requir.xlsx CM-5 Construction Pay Item Descriptions.pdf CM-5 Pipeline Construction RFP Bidder Resp.xlsx CM-5 Pipeline RFP TEnderXXXXX Final Releas.pdf Gas Technical Documents.zip 20161110_CM-5 Pipeline.kmz Q&A Documents and Clarification Addenda: 4-11-2017_2 of 2_ 742303 CM5 Construciton QA form.xlsx TM5.32.10 Direct BuryTrenching.pdf Descoping Clarifications.docx APPENDIX B Agreement Sum and Payment Schedule ITEM 100 DESCRIPTION Project Start/Mobilization QTY1 Units Unit price TOTAL Lump Sum 110 24-inch Pipeline Labor Component included in Lump Sum - Tax Exempt 1 Lump Sum 120 24-inch Pipeline Material Component included in Lump Sum 1 Lump Sum 130 24-inch Pipeline Equipment Component included in Lump Sum 1 Lump Sum 140 Pipeline Alignment Field Staking Component included in Lump Sum 1 Lump Sum 150 Hauling of Pipe Component included in Lump Sum (Loaded Labor and Equipment) 1 Lump Sum 180 R.O.W. Clearing Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 190 Erosion and Sediment Control Component included in Lump Sum (Labor EquipmentEquipment Rates for Electric Construction Services for unusual or non-routine work, Materials) 1 Lump Sum 200 Cathodic Protection Component included in Lump Sum (Laborincluding emergency restoration services, Materials, Equipment) 1 Lump Sum 230 Restoration Component included in Lump Sum (Labor, Equipment, Materials) 1 Lump Sum 240 Third Party Caliper Pig Inspection Component included in Lump Sum 1 Lump Sum 250 Demobilization 1 Lump Sum 260 Balance are being solicited for all four of Bid Unclassified 1 Lump Sum 270 Rock Excavation CY 280 Imported Select Fill (Material and Trucking to Site) Ton 290 Trucking of Spoils-Clean and Regulated Materials-Project Site to Mill Seat Landfill Ton 300 Option Pricing - Add/Deduct to Extend HDD found on SH-16 south to include section and eliminate bore on SH-15, and exit south of station 207+50. If Deduct, enter negative number in Unit Price and note in Assumptions Tab. 1 Lump Sum GRAND TOTAL BIDits Network Affiliates.
Appears in 1 contract
Samples: Framework Agreement
Small Business Subcontracting Plan. Some or all of the Goods and Services provided hereunder may be used in a contract with the federal government and, therefore, may be subject to the requirements of FAR section 52.219-9. If applicable, each Supplier (except small business concerns) whose contract is expected to exceed for construction) and has subcontracting possibilities is required to submit an acceptable subcontracting plan to the Customer. The plan shall include spending goals with businesses that are defined by the U.S. Small Business Administration as small, women-owned small, veteran-owned small, service-disabled veteran-owned small, HUBZone, small disadvantaged (SDB), Alaskan Native Corporations, and Indian tribes. If the Supplier fails to submit a plan within the time limit prescribed by the Customer, Customer may terminate this Agreement. The Supplier assures that the clause entitled “Small Business Subcontracting Plan” will be included in all subcontracts, that offer further subcontracting opportunities, and all subcontractors (except small business concerns) who receive subcontracts in excess of for construction) will be required to adopt a plan similar to this plan. APPENDIX A Specifications and Schedule PROJECT SUMMARY The CM-5 Pipeline Project is R.E.D. project will consist of a system reinforcement project for 16-inch diameter coated steel distribution pipeline located in the Towns of Gates, Greece and the City of Rochester Gas & Electric (RG&E) distribution systemin the State of New York. The 24-inch steel new distribution main will provide service to the Xxxxxxx Business Park in support of the coal to natural gas conversion of the existing High Pressure Boilers utilized in the Electricity Co- Generation operations onsite. This is an approximately 4.3 mile pipeline with a maximum allowable operating pressure (MAOP) of 120 psi. The new pipeline will be approximately 5.1 miles in length; fed from a new regulator set located wholly in at the Town of ChiliBuffalo Road Regulator Station, New York and will traverse active agricultural, fallow fieldfeed gas through areas of diverse terrain, and wetland land typesfunctional use, with connection achieved through the construction of a new meter and regulator set (work performed by others) proximate the existing EBP service location off Xxxxxxx Road. The rest of the documents as submitted through SRM tender and clarifying rounds RELATED DOCUMENTS (742303, 744586, 746379Attached to this Agreement in a separate CD). Initial Documents: • Project General Requirements (RFP Document) • Design Drawings (Appendix A Design Drawings.pdf A) • RED Pre-Characterization Report-SMP R000530-3-10-F-0058 Rev 1 RED Pre characterization Report 10.11.2016 (Appendix B Stormwater B) • Storm Water Pollution Prevention.pdf Prevention Plan (SWPPP) (Appendix C NYS PSC EMCSP Feb 2006.pdf C) • Pipeline Geotechnical Report (Appendix D Boring Logs ND 15-4490.xlsx Appendix E Invasive Species Control Plan.pdf Appendix F Agricultural Mitigation.pdf Appendix G Article VII Construction Requir.xlsx CM-5 Construction Pay Item Descriptions.pdf CM-5 Pipeline Construction RFP Bidder Resp.xlsx CM-5 Pipeline RFP TEnderXXXXX Final Releas.pdf Gas Technical Documents.zip 20161110_CM-5 Pipeline.kmz Q&A Documents and Clarification Addenda: 4-11-2017_2 of 2_ 742303 CM5 Construciton QA form.xlsx TM5.32.10 Direct BuryTrenching.pdf Descoping Clarifications.docx APPENDIX B Agreement Sum and Payment Schedule ITEM 100 DESCRIPTION Project Start/Mobilization QTY1 Units Unit price TOTAL Lump Sum 110 24-inch Pipeline Labor Component included in Lump Sum - Tax Exempt 1 Lump Sum 120 24-inch Pipeline Material Component included in Lump Sum 1 Lump Sum 130 24-inch Pipeline Equipment Component included in Lump Sum 1 Lump Sum 140 Pipeline Alignment Field Staking Component included in Lump Sum 1 Lump Sum 150 Hauling of Pipe Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 180 R.O.W. Clearing Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 190 Erosion and Sediment Control Component included in Lump Sum (Labor Equipment, Materials) 1 Lump Sum 200 Cathodic Protection Component included in Lump Sum (Labor, Materials, Equipment) 1 Lump Sum 230 Restoration Component included in Lump Sum (Labor, Equipment, Materials) 1 Lump Sum 240 Third Party Caliper Pig Inspection Component included in Lump Sum 1 Lump Sum 250 Demobilization 1 Lump Sum 260 Balance of Bid Unclassified 1 Lump Sum 270 Rock Excavation CY 280 Imported Select Fill (Material and Trucking to Site) Ton 290 Trucking of Spoils-Clean and Regulated Materials-Project Site to Mill Seat Landfill Ton 300 Option Pricing - Add/Deduct to Extend HDD found on SH-16 south to include section and eliminate bore on SH-15, and exit south of station 207+50. If Deduct, enter negative number in Unit Price and note in Assumptions Tab. 1 Lump Sum GRAND TOTAL BIDD)
Appears in 1 contract
Samples: Agreement
Small Business Subcontracting Plan. Some or all of the Goods and Services provided hereunder may be used in a contract with the federal government and, therefore, may be subject to the requirements of FAR section 52.219-9. If applicable, each Supplier (except small business concerns) whose contract is expected to exceed for construction) and has subcontracting possibilities is required to submit an acceptable subcontracting plan to the Customer. The plan shall include spending goals with businesses that are defined by the U.S. Small Business Administration as small, women-owned small, veteran-owned small, service-disabled veteran-owned small, HUBZone, small disadvantaged (SDB), Alaskan Native Corporations, and Indian tribes. If the Supplier fails to submit a plan within the time limit prescribed by the Customer, Customer may terminate this Agreement. The Supplier assures that the clause entitled “Small Business Subcontracting Plan” will be included in all subcontracts, that offer further subcontracting opportunities, and all subcontractors (except small business concerns) who receive subcontracts in excess of for construction) will be required to adopt a plan similar to this plan. APPENDIX A Specifications and Schedule PROJECT SUMMARY The CM-5 Pipeline Project is a system reinforcement project for the Rochester Gas & Electric (RG&E) distribution system. The 24-inch steel pipeline will be approximately 5.1 miles in length; located wholly in the Town of Chili, New York and will traverse active agricultural, fallow field, and wetland land types. The rest of the documents as submitted through SRM tender and clarifying rounds (742303, 744586, 746379). Initial Documents: Appendix A Design Drawings.pdf Appendix B Stormwater Pollution Prevention.pdf Appendix C NYS PSC EMCSP Feb 2006.pdf Appendix D Boring Logs ND 15-4490.xlsx Appendix E Invasive Species Control Plan.pdf Appendix F Agricultural Mitigation.pdf Appendix G Article VII Construction Requir.xlsx CM-5 Construction Pay Item Descriptions.pdf CM-5 Pipeline Construction RFP Bidder Resp.xlsx CM-5 Pipeline RFP TEnderXXXXX Final Releas.pdf Gas Technical Documents.zip 20161110_CM-5 Pipeline.kmz Q&A Documents and Clarification Addenda: 4-11-2017_2 of 2_ 742303 CM5 Construciton QA form.xlsx TM5.32.10 Direct BuryTrenching.pdf Descoping Clarifications.docx APPENDIX B Agreement Sum and Payment Schedule ITEM DESCRIPTION QTY Units Unit price TOTAL 100 DESCRIPTION Project Start/Mobilization QTY1 Units Unit price TOTAL 1 Lump Sum 110 24-inch Pipeline Labor Component included in Lump Sum - Tax Exempt 1 Lump Sum 120 24-inch Pipeline Material Component included in Lump Sum 1 Lump Sum 130 24-inch Pipeline Equipment Component included in Lump Sum 1 Lump Sum 140 Pipeline Alignment Field Staking Component included in Lump Sum 1 Lump Sum 150 Hauling of Pipe Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 180 R.O.W. Clearing Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 190 Erosion and Sediment Control Component included in Lump Sum (Labor Equipment, Materials) 1 Lump Sum 200 Cathodic Protection Component included in Lump Sum (Labor, Materials, Equipment) 1 Lump Sum 230 Restoration Component included in Lump Sum (Labor, Equipment, Materials) 1 Lump Sum 240 Third Party Caliper Pig Inspection Component included in Lump Sum 1 Lump Sum 250 Demobilization 1 Lump Sum 260 Balance of Bid Unclassified 1 Lump Sum 270 Rock Excavation CY 280 Imported Select Fill (Material and Trucking to Site) Ton 290 Trucking of Spoils-Clean and Regulated Materials-Project Site to Mill Seat Landfill Ton 300 Option Pricing - Add/Deduct to Extend HDD found on SH-16 south to include section and eliminate bore on SH-15, and exit south of station 207+50. If Deduct, enter negative number in Unit Price and note in Assumptions Tab. 1 Lump Sum GRAND TOTAL BID
Appears in 1 contract
Samples: Agreement
Small Business Subcontracting Plan. Some or all of the Goods and Services provided hereunder may be used in a contract with the federal government and, therefore, may be subject to the requirements of FAR section 52.219-9. If applicable, each Supplier Contractor (except small business concerns) whose contract is expected to exceed $650,000 ($1,500,000 for construction) and has subcontracting possibilities is required to submit an acceptable subcontracting plan to the CustomerOwner. The plan shall include spending goals with businesses that are defined by the U.S. Small Business Administration as small, women-owned small, veteran-owned small, service-disabled veteran-owned small, HUBZone, small disadvantaged (SDB), Alaskan Native Corporations, and Indian tribes. If the Supplier Contractor fails to submit a plan within the time limit prescribed by the CustomerOwner, Customer Owner may terminate this Agreement. The Supplier Contractor assures that the clause entitled “Small Business Subcontracting Plan” will be included in all subcontracts, that offer further subcontracting opportunities, and all subcontractors Subcontractors (except small business concerns) who receive subcontracts in excess of $650,000 ($1,500,000 for construction) will be required to adopt a plan similar to this plan. APPENDIX DocuSign Envelope ID: 5777FEA2-B5C3-4D66-8DED-BACB1A120379 Xxxxxxx Xxxxxx President & CEO 7/23/2020 Xxxxxx Xxxxxxxxxx VP - Controler AGR Networks 8/4/2020 SCHEDULE A Specifications and Schedule PROJECT SUMMARY The CM-5 Pipeline Project is a system reinforcement project for the - Companies New York State Electric & Gas Corporation 00 Xxxx Xxxxxx Xxxxxxxxx, Xxx Xxxx 00000 Rochester Gas & and Electric Corporation 00 Xxxx Xxxxxx Xxxxxxxxx, Xxx Xxxx 00000 The Berkshire Gas Company 000 Xxxxxxxx Xxxx Xxxxxxxxxx, XX 00000 Maine Natural Gas Corporation 0 Xxxxxxxxxx Xxxxxxx Xxxxxxxxx, XX 00000 The Southern Connecticut Gas Company Locations: SCG Ops Center Southern Connecticut Gas 00 Xxxxx Xxxx Xx, Orange, CT 06477 SCG LNG 000 Xxxxxxxx Xx, Xxxxxxx, XX 00000 Connecticut Natural Gas Corporation Locations: CNG LNG 0000 Xxxxxxxx Xxx, Rocky Hill, CT 06067 CNG Ops Center 00 Xxxxxx Xxxxxx, Xxxx Xxxxxxxx, XX 00000 CNG – Greenwich Ops Center 00 Xxx Xxxxx XxxxXxxxxxxxx, XX 00000 SCHEDULE D - Compensation Owner will compensate Contractor for performance of the Services as set forth in Schedule B, the total fixed unit price amount of DOLLARS IN ALL CAPS AND XX/100 DOLLARS (RG&E$amount.00) distribution systemas specified in the Schedule of Values herein. The 24-inch steel pipeline will be approximately 5.1 miles fixed unit price amount includes all fees described in length; located wholly in the Town of Chili, New York and will traverse active agricultural, fallow fieldthis Agreement, and wetland land types. The rest of all other costs, reimbursable items, overhead, applicable taxes and profit in connection with the documents as submitted through SRM tender and clarifying rounds (742303, 744586, 746379). Initial Documents: Appendix A Design Drawings.pdf Appendix B Stormwater Pollution Prevention.pdf Appendix C NYS PSC EMCSP Feb 2006.pdf Appendix D Boring Logs ND 15-4490.xlsx Appendix E Invasive Species Control Plan.pdf Appendix F Agricultural Mitigation.pdf Appendix G Article VII Construction Requir.xlsx CM-5 Construction Pay Item Descriptions.pdf CM-5 Pipeline Construction RFP Bidder Resp.xlsx CM-5 Pipeline RFP TEnderXXXXX Final Releas.pdf Gas Technical Documents.zip 20161110_CM-5 Pipeline.kmz Q&A Documents and Clarification Addenda: 4-11-2017_2 of 2_ 742303 CM5 Construciton QA form.xlsx TM5.32.10 Direct BuryTrenching.pdf Descoping Clarifications.docx APPENDIX B Agreement Sum and Payment Schedule ITEM 100 DESCRIPTION Project Start/Mobilization QTY1 Units Unit price TOTAL Lump Sum 110 24-inch Pipeline Labor Component included in Lump Sum - Tax Exempt 1 Lump Sum 120 24-inch Pipeline Material Component included in Lump Sum 1 Lump Sum 130 24-inch Pipeline Equipment Component included in Lump Sum 1 Lump Sum 140 Pipeline Alignment Field Staking Component included in Lump Sum 1 Lump Sum 150 Hauling of Pipe Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 180 R.O.W. Clearing Component included in Lump Sum (Labor and Equipment) 1 Lump Sum 190 Erosion and Sediment Control Component included in Lump Sum (Labor Equipment, Materials) 1 Lump Sum 200 Cathodic Protection Component included in Lump Sum (Labor, Materials, Equipment) 1 Lump Sum 230 Restoration Component included in Lump Sum (Labor, Equipment, Materials) 1 Lump Sum 240 Third Party Caliper Pig Inspection Component included in Lump Sum 1 Lump Sum 250 Demobilization 1 Lump Sum 260 Balance of Bid Unclassified 1 Lump Sum 270 Rock Excavation CY 280 Imported Select Fill (Material and Trucking to Site) Ton 290 Trucking of Spoils-Clean and Regulated Materials-Project Site to Mill Seat Landfill Ton 300 Option Pricing - Add/Deduct to Extend HDD found on SH-16 south to include section and eliminate bore on SH-15, and exit south of station 207+50Services. If DeductOwner determines that certain deliverables may not be required, enter negative number Owner may amend the Services and remove such deliverables and their associated costs from the Agreement in Unit Price and note accordance with the Changes provisions in Assumptions Tab. 1 Lump Sum GRAND TOTAL BIDArticle 9 of this Agreement.
Appears in 1 contract
Samples: Construction Services Agreement