Laundry Facilities Washers and dryers are installed in each apartment for the exclusive use of students in the apartment. Any other use is prohibited. The use of washers and dryers are free. LINEN: Brighton provides a mattress cover on all mattresses. Students need to bring their own bedding. All beds are regular twin size. The typical cost for replacing a mattress cover is $25.00. MAINTENANCE: Students are responsible to notify the manager in writing as soon as possible if they notice anything in an apartment that requires repair work or maintenance. See “Property Conditions” section 12 of the BYU-Idaho Student Landlord Housing Contract.
Existing Facilities Each of the Existing Facilities shall be repaid in full and terminated and all collateral security therefor shall be released, and the Administrative Agent shall have received pay-off letters in form and substance satisfactory to it evidencing such repayment, termination and release.
Toilet Facilities The Employer provides the Contractor access to toilet facilities. Temporary chemical toilets are provided by the Contractor where deemed necessary.
New Facilities For all new Generating Facilities to be interconnected pursuant to the Tariff, other than wind- powered and other non-synchronous generation facilities, the Generation Interconnection Customer shall design its Customer Facility to maintain a composite power delivery at continuous rated power output at a power factor of at least 0.95 leading to 0.90 lagging. For all new wind- powered and other non-synchronous generation facilities the Generation Interconnection Customer shall design its Customer Facility with the ability to maintain a composite power delivery at a power factor of at least 0.95 leading to 0.95 lagging across the full range of continuous rated power output. For all wind-powered and other non-synchronous generation facilities entering the New Service Queue on or after November 1, 2016, the power factor requirement shall be measured at the high-side of the facility substation transformers. This power factor range standard shall be dynamic and can be met using, for example, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors, or a combination of the two. For all wind-powered and other non-synchronous generation facilities entering the New Service Queue on or after May 1, 2015, and before November 1, 2016, the power factor requirement shall be measured at the generator’s terminals. For new generation resources of more than 20 MW, other than wind- powered and other non-synchronous Generating Facilities, the power factor requirement shall be measured at the generator’s terminals. For new generation resources of 20 MW or less, and all wind-powered and other non-synchronous generation facilities entering the New Service Queue prior to May 1, 2015, the power factor requirement shall be measured at the Point of Interconnection. Any different reactive power design criteria that Transmission Provider determines to be appropriate for a wind-powered or other non-synchronous generation facility shall be stated in the Interconnection Service Agreement. A Transmission Interconnection Customer interconnecting Merchant D.C. Transmission Facilities and/ or Controllable A.C. Merchant Transmission Facilities shall design its Customer Facility to maintain a power factor at the Point of Interconnection of at least 0.95 leading and 0.95 lagging, when the Customer Facility is operating at any level within its approved operating range.
Other Facilities Promptly and in no event more than ten (10) days after the effectiveness thereof, copies of (i) any documents, agreements or instruments evidencing indebtedness for borrowed money of any DT Entity and (ii) any amendment, restatement, supplement or other modification any documents, agreements or instruments evidencing indebtedness for borrowed money of any DT Entity, including, without limitation, any fee letter, waiver, consent and any other document, agreement or instrument executed in connection with any of the foregoing.
Common Facilities “Common Facilities” includes all areas, facilities, utilities, equipment and services provided by Landlord for the common use or benefit of the occupants of the Property, and their employees, agents, customers and other invitees, including without limitation building lobbies, common corridors and hallways, restrooms, pedestrian walkways, driveways and access roads, access facilities for disabled persons (including elevators), truck serviceways, loading docks, garages, driveways, parking lots, landscaped areas, stairways, elevators, retaining walls, all areas required to be maintained under the conditions of governmental approvals for the Property, comfort and first-aid stations, parcel pick-up stations and other generally understood public or common areas. All Common Facilities shall at all times be subject to the exclusive control and management of Landlord. Landlord shall have the right, without liability to Tenant, to relocate, alter, improve, or adjust the size and location of any Common Facilities from time to time, and Landlord shall have the right from time to time to establish, modify and enforce reasonable rules and regulations with respect to the Common Facilities. Landlord shall have the right to construct, maintain and operate lighting facilities on the Common Facilities; to police the same; from time to time to change the area, level, location and arrangement of parking areas and other facilities; to restrict parking by tenants, their officers, agents and employees to employee parking areas; to enforce parking charges (by operation of meters or otherwise), with appropriate provisions for free parking ticket validating by tenants; to close all or any portion of the Common Facilities to such extent as may, in the opinion of Landlord’s counsel, be legally sufficient to prevent a dedication thereof or the accrual of any rights to any person or the public therein; to close temporarily all or any portion of the Common Facilities; to discourage non-customer parking; and to do and perform such other acts in and to the Common Facilities which Landlord shall determine, using good business judgment, to be advisable to improve the convenience and use thereof by tenants, their officers, agents, employees and customers. Subject to the foregoing, Tenant may use all Common Facilities not within the Premises, under a revocable license, on a nonexclusive basis in common with other tenants. If any such license is revoked, or if the amount of such areas is diminished, Landlord shall not be subject to any liability and Tenant shall not be entitled to any compensation or abatement of rent, nor shall such revocation or diminution be deemed constructive or actual eviction.
PUBLIC FACILITIES Supplier’s employees may be required to perform work at government- owned facilities, including schools. Supplier’s employees and agents must conduct themselves in a professional manner while on the premises, and in accordance with Participating Entity policies and procedures, and all applicable laws.
Ancillary Facilities (a) If any Borrower and any Ancillary Lender agree, subject to compliance with the requirements set forth in this Section 2.23, such Ancillary Lender shall be permitted to provide an Ancillary Facility on a bilateral basis to such Borrower. To the extent any Ancillary Facility exists, the following shall apply: (i) The applicable Revolving Commitment of the Ancillary Lender shall: (A) be deemed to be utilized by its applicable Ancillary Commitment for purposes of (1) calculating the commitment fee payable to such Ancillary Lender pursuant to Section 2.12(a) and (2) calculating the aggregate remaining amount of Revolving Exposure of all applicable Revolving Lenders available under the Revolving Facility (it being understood the commitment fee payable pursuant Section 2.12(a) to Lenders without an Ancillary Facility shall not be modified by the existence of any Ancillary Facility and for purposes of such calculation it shall be assumed that each such Lender’s Revolving Commitments have not been reduced as a result of such Ancillary Facility) (such remaining amount, the “Remaining Revolving Exposure”) and (B) not be deemed to be utilized by the Ancillary Commitment of the applicable Ancillary Lender for purposes of determining whether the Dollar Equivalent of such Ancillary Lender’s Revolving Exposure exceeds its applicable Revolving Commitment (and therefor whether such Ancillary Lender is required to make or participate in a Loan or Letter of Credit under this Agreement). (ii) Borrowings of the Remaining Revolving Exposure shall be made on a pro rata basis among the Revolving Lenders of the applicable Class (including the applicable Ancillary Lenders) pursuant to and subject to the limitations set forth in Section 2.01. (b) To request the creation of an Ancillary Facility, any Borrower shall deliver to the Administrative Agent not later than five (5) Business Days (or such shorter period agreed to by the Administrative Agent) prior to the first date on which such Ancillary Facility is proposed to be made available: (i) a notice in writing specifying: (A) the Borrower or Borrowers to which extensions of credit will be made available thereunder; (B) the first Business Day on which such Ancillary Facility shall be made and the expiration date of such Ancillary Facility (which shall be no later than the Revolving Maturity Date); (C) the type of Ancillary Facility being provided; (D) the identity of the Ancillary Lender(s); and (E) the amount and currency of the Ancillary Commitment with respect to such Ancillary Facility (which shall be expressed in any currency to which such Ancillary Lenders may agree) and shall not exceed such Ancillary Lender’s Revolving Commitment; (ii) a copy of the Ancillary Facility Documents with respect to such Ancillary Facility, together with a certificate of a Responsible Officer of the applicable Borrower(s) certifying that the terms of such Ancillary Facility satisfy the requirements set forth in this Section 2.23 (including any applicable definitions used herein); and (iii) such other information that the Administrative Agent may reasonably request in connection with such Ancillary Facility. The Administrative Agent shall give notice to each Revolving Lender of such Ancillary Facility notice. (i) Subject to the terms of this Agreement, an Affiliate of any Revolving Lender (other than a Disqualified Institution) may become an Ancillary Lender, in which case such Revolving Lender and such Affiliate shall be treated as a single Revolving Lender whose Revolving Commitment is as set forth in Schedule 2.01 or in the Assignment and Assumption pursuant to which such Revolving Lender assumed its Revolving Commitment. (ii) To the extent that this Agreement or any other Loan Document imposes any obligation on any Ancillary Lender and such Ancillary Lender is an Affiliate of a Revolving Lender and not a party thereto, the relevant Revolving Lender shall ensure that such obligation is performed by such Affiliate in compliance with the terms hereof or such other Loan Document. (iii) Each Ancillary Lender, in its capacity as such, hereby appoints the Administrative Agent as its agent for purposes of the Loan Documents and for the avoidance of doubt agrees the Administrative Agent may rely on the applicable protections and indemnities set forth herein (including those set forth in Article IX) with respect to its role as agent under the Loan Documents for such Ancillary Lender. (d) The terms and conditions of any Ancillary Facility shall be as agreed by the applicable Ancillary Lenders and the applicable Borrower thereunder; provided that such terms shall at all times: (i) permit extensions of credit thereunder to be made only to the applicable Borrower; (ii) provide that the Ancillary Commitment of the applicable Ancillary Lenders under such Ancillary Facility shall not exceed such Ancillary Lender’s USD Only Revolving Commitment or USD/Multicurrency Revolving Commitment, as applicable, and that, in the event and on such occasion that such Ancillary Commitment exceeds such USD Only Revolving Commitment or USD/Multicurrency Revolving Commitment, as applicable, such Ancillary Commitment shall be automatically reduced by the amount of such excess; (iii) provide that the Ancillary Facility Exposure shall not exceed the Ancillary Commitment with respect to such Ancillary Facility and (iv) provide that the Ancillary Commitment under such Ancillary Facility shall be canceled, and that all extensions of credit under such Ancillary Facility shall be repaid, not later than the Revolving Maturity Date unless cash collateralized or supported by the issuance of a “back to back” letter of credit in a manner meeting the requirements of clause (iv) of the definition of “Date of Full Satisfaction”. (e) (i) Each Ancillary Facility shall terminate on the Revolving Maturity Date or such earlier date (A) as provided in the relevant Ancillary Facility Document or (B) on which its expiry date occurs or on which it is cancelled in accordance with the terms of this Agreement.
Office Facilities During the period of employment, Executive shall have his office where the Corporation’s principal executive offices are located from time to time, which currently are at 3000 Xxxx Xxxxxxxxxx Xxxxxx, Xxxxx Xxxxx, Xxxxx Xxxxxx, and the Corporation shall furnish Executive with office facilities reasonably suitable to his position at such location.
Banking Facilities Schedule 3.25 sets forth a complete and correct list of: (a) each bank, savings and loan or similar financial institution in which the Company or any of its Subsidiaries has an account or safety deposit box and the numbers of such accounts or safety deposit boxes maintained thereat; and (b) the names of all persons authorized to draw on each such account or to have access to any such safety deposit box, together with a description of the authority (and conditions thereto, if any) of each person with respect thereto.
