CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
Contract Work Hours and Safety Standards Act The following clauses apply to any Federal-aid construction contract in an amount in excess of $100,000 and subject to the overtime provisions of the Contract Work Hours and Safety Standards Act. These clauses shall be inserted in addition to the clauses required by 29 CFR 5.5(a) or 29 CFR 4.6. As used in this paragraph, the terms laborers and mechanics include watchmen and guards.
Waste Disposal Tenant shall store its waste either inside the Premises or within outside trash enclosures that are fully fenced and screened in compliance with all Private Restrictions, and designed for such purpose. All entrances to such outside trash enclosures shall be kept closed, and waste shall be stored in such manner as not to be visible from the exterior of such outside enclosures. Tenant shall cause all of its waste to be regularly removed from the Premises at Tenant’s sole cost. Tenant shall keep all fire corridors and mechanical equipment rooms in the Premises free and clear of all obstructions at all times.
Work Health and Safety (a) The employer and employee acknowledge their responsibilities under the Work Health and Safety Act 2011 and Work Health and Safety Regulations 2012. (b) Where there is a Work Health and Safety Representative they must be elected and will carry out the tasks associated with the role of Work Health and Safety Representative set out within the Work Health and Safety Act 2011.
Contract Database Metadata Elements Title: Xxxxxxx-Xxx Xxxxx Central School District and Xxxxxxx-Xxx Xxxxx Teachers Association (2007)
Food Service Waste Reduction Requirements Contractor shall comply with the Food Service Waste Reduction Ordinance, as set forth in San Francisco Environment Code Chapter 16, including but not limited to the remedies for noncompliance provided therein.
SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.
Fire Safety Resident will not tamper with fire alarms, smoke detectors, fire extinguishers, fire hoses, or exit signs. Resident will promptly evacuate Residence Facility upon the sounding of an alarm or as otherwise directed by College Housing staff. Resident will participate in any periodic fire drill and fire safety training conducted by College for the Residence Facility.
ARTICLE HEALTH AND SAFETY The Employer shall prepare a comprehensive policy on resident handling and safe work practices within six (6)months of the date of Such policies will be reviewed by the Joint Health and Safety Committee. A joint management and employee Health Safety Committee shall be constituted with representationof at least half by employees from the bargaining units and the employees who are not represented by the Unions and who do not exercise managerial functions which shall identify potential dangers, recommend means of improving the health and safety programs and obtaining information from the Employer or other persons respecting the identification of hazards and standards elsewhere. The committee shall normally meet at least quarterly. Scheduled time spent in such meetings is to be considered time worked for which shall be paid by the Employer at his or her regular or overtime rate. Minutes shall be taken of all meetings and copies shall be sent to the Committee members. Minutes of the meetings shall be posted on the workplace health safety bulletin board. The Employer shall provide the time from work with pay and all related tuition costs and expenses necessary to certify the worker representative. Where an inspector makes an inspection of a workplace under the powers conferred upon him or her under the Occupational Health and Safety Act, the employer shall afford a certified committee member representing workers the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. Where a worker certified member is not site and available, the Employer shall afford a worker health and safety representative if any, or a worker selected by a Union, because of knowledge, experience and training, to represent it, the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. Two (2) representatives of the Joint Health and Safety Committee, one (1) from management and one (1) from the employees, shall make monthly inspections of the work place and shall report to the health and safety committee the results of their inspection. The members of the Committee who represent the workers shall designate a certified member or person who is properly trained to inspect the workplace. Where possible that member shall be a certified member. The employer shall provide the member with such information and assistance as the member may require for the purpose of carrying out an inspection of the workplace. In the event of accident or injury, such representatives shall be notified immediately and shall investigate and report as soon as possible to the committee and to the Employer on the nature and causes of the accident or injury. Furthermore, such representatives must be notified of the inspection of a government inspector and shall have the right to accompany him on his inspections. Scheduled time spent in all such activities shall be considered as time worked The Joint Health and Safety Committee and the representativesthereof shall have access to Report Form required in and of the Act and the annual summary of data from the relating to the number of work accident fatalities, the number of lost workday cases, the number of lost workdays, the number of cases that required medical aid without lost workdays, the incidence of occupational injuries, and such other data as the may decide to disclose. It is understood and agreed that no information will be provided to the Committee which is confidential. This information shall be a standing item recorded in the minutes of each meeting. The Union will use its best efforts to obtain the full co-operationof its membership in the compliance of all safety rules and practices. The Employer will use its best efforts to make all affected direct care employees aware of residents who have serious infectious diseases. The nature of the disease need not be disclosed. Employees will be made aware of special procedures required of them to deal with these circumstances. The parties agree that all employees are aware of the requirement to practice universal precautions in all circumstances.
Prescription Safety Glasses Prescription safety glasses will be furnished by the employer. The employer retains the authority to establish reasonable rules and procedures regarding frequency of issue, replacement of damaged glasses, limits on reimbursement costs and coordination with the employer's vision plan.
