Submitted Genes Sample Clauses

Submitted Genes. On a Submitted Gene-by-Submitted Gene basis, a non-exclusive right and license, until the earlier of (a) the date upon which a Submitted Gene becomes a Rejected Submitted Gene under this Agreement or (b) the date upon which a Submitted Gene becomes a Proposed Gene under this Agreement (at which time the license under Section 2.1.2 shall become effective), under the HYSEQ Patents and HYSEQ Know-How solely for the purpose of conducting review and analysis activities with respect to such Submitted Gene in accordance with the terms and conditions of this Agreement including determining whether such Submitted Gene is in Deltagen's Conflicting Pipeline, and performing an intellectual property analysis with respect to DELTAGEN's use of such Submitted Genes.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs
Submitted Genes. Within [ * ] after the first Steering Committee meeting, HYSEQ shall submit in writing to DELTAGEN for its review and consideration an initial written list(s) of [ * ] Submitted Genes and, within [ * ] after the Effective Date, shall submit in writing to DELTAGEN for its review and consideration a written list(s) of an additional [ * ] Submitted Genes for DELTAGEN to review under this Section 4. 1.1. HYSEQ shall use [ * ] efforts to submit additional Submitted Genes under this Agreement during such [ * ] period to replace Rejected Submitted Genes that DELTAGEN has rejected under this Section 4.1.1 until [ * ] Project Genes have been selected. HYSEQ agrees to [ * ] when deciding which human gene sequences to include in the list of Submitted Genes to be submitted to DELTAGEN. Any submission of Submitted Genes subsequent to such [ * ] period shall be subject to the approval of the Steering Committee. All Submitted Genes submitted by HYSEQ to the Steering * Confidential portions of this document have been redacted and have been filed separately with the Commission. Committee under this Section 4.1 shall be accompanied by at least a partial murine ortholog gene sequence believed by HYSEQ to correspond to the gene sequence of such Submitted Gene (unless HYSEQ is unable to identify such an orthologous partial murine gene sequence for a Submitted Gene, in which case HYSEQ shall report such results to the Steering Committee) and DELTAGEN shall notify HYSEQ as to whether or not, [ * ] [ * ] as of the date of its submission by HYSEQ. If any of the Submitted Genes have [ * ], HYSEQ shall provide this information promptly to the Steering Committee with its information under Section 4.1.3 and HYSEQ hereby expressly acknowledges and agrees that if the Steering Committee designates such a Submitted Gene as a Proposed Gene or a Project Gene, as between DELTAGEN and HYSEQ that HYSEQ is [ * ], while such Proposed Gene or Project Gene, as applicable, remains under this Agreement, and HYSEQ shall not [ * ] except as provided in Section 2.1.4(b) for a Rejected Project Gene.
Sample 1

Related to Submitted Genes

  • Purchase Order Pricing/Product Deviation If a deviation of pricing/product on a Purchase Order or contract modification occurs between the Vendor and the TIPS Member, TIPS must be notified within five (5) business days of receipt of change order. TIPS reserves the right to terminate this agreement for cause or no cause for convenience with a thirty (30) days prior written notice. Termination for convenience is conditionally required under Federal Regulations 2 CFR part 200 if the customer is using federal funds for the procurement. All purchase orders presented to the Vendor, but not fulfilled by the Vendor, by a TIPS Member prior to the actual termination of this agreement shall be honored at the option of the TIPS Member. The awarded Vendor may terminate the agreement with ninety (90) days prior written notice to TIPS 0000 XX Xxx Xxxxx, Xxxxxxxxx, Xxxxx 00000. The vendor will be paid for goods and services delivered prior to the termination provided that the goods and services were delivered in accordance with the terms and conditions of the terminated agreement. This termination clause does not affect the sales agreements executed by the Vendor and the TIPS Member customer pursuant to this agreement. TIPS Members may negotiate a termination for convenience clause that meets the needs of the transaction based on applicable factors, such as funding sources or other needs. Usually, purchase orders or their equal are issued by participating TIPS Member to the awarded vendor and should indicate on the order that the purchase is per the applicable TIPS Agreement Number. Orders are typically emailed to TIPS at xxxxxx@xxxx-xxx.xxx. • Awarded Vendor delivers goods/services directly to the participating member. • Awarded Vendor invoices the participating TIPS Member directly. • Awarded Vendor receives payment directly from the participating member. • Fees are due to TIPS upon payment by the Member to the Vendor. Vendor agrees to pay the participation fee to TIPS for all Agreement sales upon receipt of payment including partial payment, from the Member Entity or as otherwise agreed by TIPS in writing and signed by an authorized signatory of TIPS.

  • SUBMITTAL LABEL All submittals, should use the hard-copy label below and place on front of their outermost sealed envelope/package. Company : Contact Name: Contact Phone/ Email: Address: CONTACT: IFB NUMBER: TITLE: BID DUE DATE: ORANGE COUNTY PROCUREMENT DIVISION INTERNAL OPERATIONS CENTRE II 000 X. XXXXX XXXXXX, 2ND FLOOR ORLANDO, FL 32801.

  • BID SUBMISSION All Bids are to be packaged, sealed and submitted to the location stated in the Bid Specifications. Bidders are solely responsible for timely delivery of their Bids to the location set forth in the Bid Specifications prior to the stated Bid opening date/time. A Bid return envelope, if provided with the Bid Specifications, should be used with the Bid sealed inside. If the Bid response does not fit into the envelope, the Bid envelope should be attached to the outside of the sealed box or package with the Bid inside. If using a commercial delivery company that requires use of their shipping package or envelope, Bidder’s sealed Bid, labeled as detailed below, should be placed within the shipper’s sealed envelope to ensure that the Bid is not prematurely opened. All Bids must have a label on the outside of the package or shipping container outlining the following information: “BID ENCLOSED (bold print, all capitals) • Group Number • IFB or RFP Number • Bid Submission date and time” In the event that a Bidder fails to provide such information on the return Bid envelope or shipping material, the receiving entity reserves the right to open the shipping package or envelope to determine the proper Bid number or Product group, and the date and time of Bid opening. Bidder shall have no claim against the receiving entity arising from such opening and such opening shall not affect the validity of the Bid or the procurement. Notwithstanding the receiving agency’s right to open a Bid to ascertain the foregoing information, Bidder assumes all risk of late delivery associated with the Bid not being identified, packaged or labeled in accordance with the foregoing requirements. All Bids must be signed by a person authorized to commit the Bidder to the terms of the Bid Documents and the content of the Bid (offer).

  • AUDIT OF LICENSED PRODUCT USAGE Contractor shall have the right to periodically audit, no more than annually, at Contractor’s expense, use of licensed Product at any site where a copy of the Product resides provided that: (i) Contractor gives Licensee(s) at least thirty (30) days advance written notice, (ii) such audit is conducted during such party’s normal business hours, (iii) the audit is conducted by an independent auditor chosen on mutual agreement of the parties. Contractor shall recommend a minimum of three (3) auditing/accounting firms from which the Licensee will select one (1). In no case shall the Business Software Alliance (BSA), Software Publishers Association (SPA), Software and Industry Information Association (SIIA) or Federation Against Software Theft (FAST) be used directly or indirectly to conduct audits, or be recommended by Contractor; (iv) Contractor and Licensee are each entitled to designate a representative who shall be entitled to participate, and who shall mutually agree on audit format, and simultaneously review all information obtained by the audit. Such representatives also shall be entitled to copies of all reports, data or information obtained from the audit; and (v) if the audit shows that such party is not in compliance, Licensee shall be required to purchase additional licenses or capacities necessary to bring it into compliance and shall pay for the unlicensed capacity at the NYS Net Price in effect at time of audit, or if none, then at the Contractor’s U.S. Commercial list price. Once such additional licenses or capacities are purchased, Licensee shall be deemed to have been in compliance retroactively, and Licensee shall have no further liability of any kind for the unauthorized use of the software.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Regulatory Submissions With respect to the Governmental Approvals of the Agreement Products in the Territory: (a) Unless otherwise required by Applicable Law, any Governmental Approvals and any Regulatory Submissions relating to Agreement Products in the Territory shall be filed, owned and held in the name of EVOLUS or its Affiliates. (b) EVOLUS shall be solely responsible, at its expense, and shall use commercially reasonable efforts to timely prepare, file, prosecute, and maintain all Regulatory Submissions relating to Agreement Products in the Territory, including any reports or amendments necessary to maintain Governmental Approvals, and for seeking any revisions of the conditions of each Governmental Approval. (c) EVOLUS shall have sole authority and responsibility and shall use commercially reasonable efforts to develop, modify, seek and/or obtain any necessary Governmental Approvals of any Labeling, packaging, advertising or other promotional or informational materials used in connection with Agreement Products in the Territory, and Promotional Materials and for determining whether the same requires Regulatory Approval. (d) EVOLUS will be the primary contact with the Regulatory Authorities in the Territory and shall be solely responsible for all communications with such Regulatory Authorities that relate to any Regulatory Submission relating to Agreement Products in the Territory prior to and after any Governmental Approval. (e) Subject to the terms and conditions of this Agreement, EVOLUS may file any submissions that are intended to change or modify Labeling or prescribing information approved by Health Canada for the Agreement Products in the field for the Territory; provided that, except as required by Applicable Laws, EVOLUS will provide to the DISTRIBUTOR a draft of such submission at least ten (10) business days prior to a planned submission to the applicable Regulatory Authority and EVOLUS will give reasonable consideration to any comments the DISTRIBUTOR may have. For greater certainty it is acknowledged and agreed that the labeling with respect to Products for distribution in Canada will be different than labeling for Products for distribution in the United States, as a result of among other things, the requirement in Canada to have the label in both English and French languages.

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • MOTION FOR FINAL APPROVAL Not later than 16 court days before the calendared Final Approval Hearing, Plaintiff will file in Court, a motion for final approval of the Settlement that includes a request for approval of the PAGA settlement under Labor Code section 2699, subd. (l), a Proposed Final Approval Order and a proposed Judgment (collectively “Motion for Final Approval”). Plaintiff shall provide drafts of these documents to Defense Counsel not later than seven days prior to filing the Motion for Final Approval. Class Counsel and Defense Counsel will expeditiously meet and confer in person or by telephone, and in good faith, to resolve any disagreements concerning the Motion for Final Approval.

  • Product Returns Client will have the responsibility for handling customer returns of the Products. Patheon will give Client any assistance that Client may reasonably require to handle the returns.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!