SUPPLY OF TEST DATA Sample Clauses

SUPPLY OF TEST DATA. The supplier shall provide the following data to the Xxxxx Corning user- plant on the per shipment basis. *, percent retained on the * and * sieves, and percent through the * sieve. Oxides and elements designated as "*" shall also be provided at the intervals listed in Section C.1. Data describing the Chemical and Physical Composition. Section C.1 and C.2 CONFIDENTIAL TREATMENT REQUESTED [*] respectively, shall be transmitted to the Xxxxx Corning user-plant and received prior to unloading. In addition, complete chemistry of * and *, as described in Section C.1, will be provided to Batch & Melting XXX, Xxxxxxxxx, Ohio, for the last five (5) railcars of each lot and the first five (5) railcars of each lot. The "*" are to be obtained from the pre-shipment sample as defined in Section E (below) with the exception of *, and *, which will be supplied by the Analytical Services Laboratory of Xxxxx Corning, based upon the loading composite for each shipment lot. The chemical analyses shall be generated by a laboratory that is certified by the Analytical Services Laboratory of Xxxxx Corning as described in Section C.4. Control charts for * , as described in Section C.6.2, will be provided to Batch & Melting XXX on a monthly basis.
AutoNDA by SimpleDocs
SUPPLY OF TEST DATA. The supplier shall provide the following data to the Xxxxx Corning user- plant on the per shipment basis: * percent retained on the * and * sieves, and percent through the * sieve. Oxides and elements designated as "*" shall also be provided at the intervals listed in Section C.1. Data describing the Chemical and Physical Composition, Section C.1 and C.2 respectively, shall be transmitted to the Xxxxx Corning user-plant and received prior to unloading. In addition, complete chemistry of * and *, as described in Section C.1, will be provided to Batch & Melting XXX, Xxxxxxxxx, Ohio, for the last ten (10) railcars of each lot and the first ten (10) railcars of each lot. The "*" are to be obtained from the pre-shipment sample as defined in Section E (below). The chemical analyses shall be generated by a laboratory that is certified by the Analytical Services Laboratory of Xxxxx Corning, as described in Section C.4. Control charts for *, as described in Section C.6.2, will be provided to Batch & Melting XXX on a monthly basis.

Related to SUPPLY OF TEST DATA

  • Laboratory Testing All laboratories selected by UPS Freight for analyzing Controlled Substances Testing will be HHS certified.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Calibration The comparison of a measurement system or device of unverified accuracy with a measurement system of known and greater accuracy to detect deviation of the unverified measurement system from required performance specifications (of the unverified measurement system or device) and to quantify all measured values to applicable units of the international system of units.

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • Background Data The Disclosing Party's Background Data, if any, will be identified in a separate technical document.

  • Tooling Unless otherwise specified in this Agreement, all tooling and/or all other articles required for the performance hereof shall be furnished by Seller, maintained in good condition and replaced when necessary at Seller's expense. If NETAPP agrees to pay Seller for special tooling or other items either separately or as a stated part of the unit price of Goods purchased herein, title to same shall be and remain in NETAPP upon payment therefore.

  • ODUF Testing 6.6.1 Upon request from TWTC, AT&T shall send ODUF test files to TWTC. The Parties agree to review and discuss the ODUF file content and/or format. For testing of usage results, AT&T shall request that TWTC set up a production (live) file. The live test may consist of TWTC’s employees making test calls for the types of services TWTC requests on ODUF. These test calls are logged by TWTC, and the logs are provided to AT&T. These logs will be used to verify the files. Testing will be completed within thirty (30) days from the date on which the initial test file was sent.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!